Open Source Arcade Machine Plans.
I spent ages looking for a nice open source arcade machine plan with no luck.
So here's mine! Not sure how well it will work with wood or mdf, it was designed with plastic in mind.
Currently only available in 10mm form. 12mm and 18mm soon.
![10mm](10mm\ Upright/Assembled.png?raw=true "10mm")
CREDITS
This project was designed by John Spencer, https://github.com/mage0r
Made at hackmelbourne.org!
SPECIAL THANKS
To the HackMelbourne (CCHS, http://hackmelbourne.org) community of Melbourne, Australia.
To all other open-source developers whose countless hours supported every other aspect of this design.
DISTRIBUTION
The specific terms of distribution of this project are governed by the license referenced below. Please contact the copyright owner if you wish to modify the board for distribution. Please utilize this design for personal or research projects. Please acknowledge all contributors.
LICENSE
Licensed under the TAPR Open Hardware License (www.tapr.org/OHL). The "license" sub-folder also contains a copy of this license in plain text format.
Copyright John Spencer 2015