This project is designed as an easy to use adapter to connect your ESP-01 device to a standard serial connection.
Version 1.3 has expanded and now includes a full usb-to-serial chip right on the board. If you'd prefer the simpiler version, follow this link to Version 1.2.
It has a program/general use button and a ws2812b to play with some blinky leds. To enable the ws2812b, simply bridge the "pixel on" pads.
Don't forget to jump on to Andy's github and do the workshop! https://github.com/geekscape/nodemcu_esp8266
This project was designed by John Spencer and Andy Gelme You can see our githubs at:
Made at hackmelbourne.org!
To the HackMelbourne (CCHS, http://hackmelbourne.org) community of Melbourne, Australia.
To all other open-source developers whose countless hours supported every other aspect of this design.
The specific terms of distribution of this project are governed by the license referenced below. Please contact the copyright owner if you wish to modify the board for distribution. Please utilize this design for personal or research projects. Please acknowledge all contributors.
Licensed under the TAPR Open Hardware License (www.tapr.org/OHL). The "license" sub-folder also contains a copy of this license in plain text format.
Copyright John Spencer, Andy Gelme 2016