how to install this library to my ide

[luxta]

am trying to buid this robot how do install this libray plz help.my name is christo from south africa.email christofaraz(at)gmail(dot)com

[mahowik]

Thanks for the comment. But for some reasom I don't see it on git...

…

On Sat, Mar 23, 2019 at 1:42 PM MXZTY ***@***.***> wrote: Hey Christo, If you are using Arduino IDE,this is how i was able to do it: 1. Download the repository as a zip folder, then extract it. 2. open the folder you just extracted the zip folder to, and double click the BalancingWii.ino file and it should automatically open everything needed in the arduino IDE. 3. You can then verify the files by clicking the checkmark in the IDE in the top left corner, and check to make sure there are no errors displayed in the console at the bottom of the IDE. 4. You can then upload it to your arduino by clicking the arrow next to the check mark. If you get an error about the naming of the parent folder when trying to open the .ino file, just change the folder name to BalancingWii instead of BalancingWii-master. Much thanks to mahowik for providing this repository! — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#5 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AGQoim0mXb8_0ABKLVzNGIZZbmI5Scb-ks5vZmdwgaJpZM4b8xDZ> .

[luxta]

ok many thanks mr mahowik i got that right,am now struggling with hc-05 module

…

On Sat, 23 Mar 2019, 19:42 MXZTY, ***@***.***> wrote: Hey Christo, If you are using Arduino IDE,this is how i was able to do it: 1. Download the repository as a zip folder, then extract it. 2. open the folder you just extracted the zip folder to, and double click the BalancingWii.ino file and it should automatically open everything needed in the arduino IDE. 3. You can then verify the files by clicking the checkmark in the IDE in the top left corner, and check to make sure there are no errors displayed in the console at the bottom of the IDE. 4. You can then upload it to your arduino by clicking the arrow next to the check mark. If you get an error about the naming of the parent folder when trying to open the .ino file, just change the folder name to BalancingWii instead of BalancingWii-master. Much thanks to mahowik for providing this repository! — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#5 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AubAVi8l29aCEQAMy56lQgrcss3w_D5Mks5vZmdwgaJpZM4b8xDZ> .

[mahowik]

from MXZTY

Hey Christo,
If you are using Arduino IDE,this is how i was able to do it:

Download the repository as a zip folder, then extract it.
open the folder you just extracted the zip folder to, and double click the BalancingWii.ino file and it should automatically open everything needed in the arduino IDE.
You can then verify the files by clicking the checkmark in the IDE in the top left corner, and check to make sure there are no errors displayed in the console at the bottom of the IDE.
You can then upload it to your arduino by clicking the arrow next to the check mark.
If you get an error about the naming of the parent folder when trying to open the .ino file, just change the folder name to BalancingWii instead of BalancingWii-master.

[luxta]

i get no errors .but my robot doesnt work.hi there