NOTE: THE NEW (GITHUB) VERSION OF SOLAAR NOW SUPPORTS THIS KEYBOARD. INSTALL SOLAAR FROM SOURCE TO USE IT PROPERLY
This is a small perl program for switching between media keys and function keys on the Logitech K780 keyboard.
Rather annoyingly this superb keyboard defaults to the function keys operating as media keys, and Logitech refuse to even acknowledge that Linux even exists!
Also Solaar doesn't (yet) support this keyboard any further than simply pairing it with the unified receiver.
So after some reverse engineering of the protocol this little program was born.
It simply sends the USB HID Output Report for switching between media keys and function keys, and nothing else. In the future it may be expanded to perform other functions.
Usage:
Select media keys:
kbswitch -m
Select function keys:
kbswitch -f
If you have multiple unifying receivers you can select it with a device path:
kbswitch -d 1-1.6 -f
You can also select the first device found using a VID and PID:
kbswitch -v 046d -p c52b -f
It defaults to the first device with the standard 046d:c52b VID/PID pair found.
You can also add the -n flag to send a destop notification through notify-send. This is useful if you bind the program
to key combinations to switch between modes.
Historical notes and musings
A new cleaner system has been invented!
A simple udev rule:
SUBSYSTEM=="hidraw", KERNEL=="hidraw*", ATTRS{idVendor}=="046d", ATTRS{idProduct}=="c52b", RUN+="/usr/sbin/keyswitch"
coupled with a tiny little script /usr/sbin/keyswitch:
#!/bin/bash
if [ "x$ACTION" = "xadd" ]; then
printf '\x10\x02\x0c\x10\x00\x00\x00' > $DEVNAME
fi
is all that is needed!
Crude program to send the codes to switch the functionality of the K780 (and probably other Logitech keyboards too) function keys.
It's very much a work in progress, and is the result of my own reverse engineering of the protocol used.
Note: This breaks the reporting of information from the keyboard to Solaar. After using this program Solaar still reports the right number of devices paired, but it no longer lists the keyboard and its status.
Currently the method is very crude, and I need to find a better way of doing it.
The system is based around sending output reports to the keyboard. The ones used here are:
10 02 0c 1c 00 00 00
which switches to F key functionality, and
10 02 0c 1c 01 00 00
which switches to media key functionality.
The problem is I use HIDAPI to send the reports, and opening the device causes it to become unbound from the usbhid driver, making the keyboard and any other device on the same receiver inoperable. A new request to bind the device is then made through /sys/bus/usb/devices/usbhid/bind but it's far from a good system. A method needs to be found to send the output reports without having to unbind the device from the driver.
The ideal situation would be for Solaar to implement the ability to send these codes.