REPRAP_DISCOUNT_SMART_CONTROLLER

Question

131710cc opened this issue 3 years ago · 6 comments

This is how is my lcd after connect to my e3d, with a sd or not, it do not show any character

Answer 1 · 2021-09-01T01:03:55.000Z

Please provide your source code to me.

Answer 2 · 2021-09-01T04:20:10.000Z

here is whole source code

Answer 3 · 2021-09-01T04:53:13.000Z

here is the link to the firmware

Answer 4 · 2021-09-07T07:13:25.000Z

I has test it and it's will work. May be you need check your wiring and your lcd.
Robin_e3.zip

Answer 5 · 2021-09-07T16:13:56.000Z

Could you send me the correct way to wiring this lcd? cause it looks right in the picture.

Answer 6 · 2021-09-13T03:00:13.000Z

Connect the EXP1 and EXP2 cable to the screen and to the motherboard if it still doesn't work this means you have to rotate the plug 180 degrees.