makerbase-mks

Klipper-for-MKS-Boards

MKS-DLC32

MKS DLC32 motherboard kit, which is an offline engraving master control kit developed for desktop engraving machines. The hardware is equipped with a 32-bit high-speed ESP32 module, integrated WIFI function, and directly drives a 3.5-inch touch color screen; it can realize fast engraving and WEB web pages. Control, mobile phone APP control and other functions.

MKS-GEN_L

MKS GEN_L is a powerful 3D printer control board with ATMEGA2560 and compatible with RAMPS. V2.1 version the motherboard integrates SPI / UART interface and works with MKS TMC2130/TMC2208 V2.0/TMC2209. It can be used after plugged in. No soldering or flying lead is required ...

MKS-Monster8

MKS Monster8 is an 8-axis motherboard, which supports Voron printers and can run Marlin and Klipper firmware.

Mks-Robin-Nano-Marlin2.0-Firmware

The firmware of Mks Robin Nano, based on Marlin-2.0.x, adding the color GUI.

MKS-Robin-Nano-V1.X

MKS Robin Nano is a powerful 32-bit 3D printer control board with STM32F103VET6. Support Marlin2.0. Support MKS Robin TFT24/28/32/35/43 touch Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 1 MAX31855.The motherboard integrates After shutdown. Support MKS Robin WIFI for cloud printing and supports firmware update by SD card…

MKS-Robin-Nano-V3.X

Robin nano V3 is an upgraded version of Robin Nano V2.0. The upgrade changes are quite large, including upgrading the MCU to the M4 core, and adding support for USB disk.

MKS-SERVO42B

MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F103C8T6 ARM 32-bit Cortex™-M3 CPU Core,72 MHz. Magnetic encoder is Allegro's A1333LLETR-T Contactless 0° to 360° angle sensor IC ,12bit .This Project open source hardware and code,support platformio build and upload firmware...

MKS-TFT

MKS TFT touch screen includes TFT24/28/32/35/70, which can be connected to the motherboard for control via AUX-1. Support Simplified Chinese, Traditional Chinese, English, Russian, Spanish and more than 5 languages, and support online language switching ...

MKS-TinyBee

MKS TinyBee is a mainboard for 3d printing, based on ESP32 module

makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware

The firmware of Mks Robin Nano, based on Marlin-2.0.x, adding the color GUI.

makerbase-mks/MKS-DLC32

MKS DLC32 motherboard kit, which is an offline engraving master control kit developed for desktop engraving machines. The hardware is equipped with a 32-bit high-speed ESP32 module, integrated WIFI function, and directly drives a 3.5-inch touch color screen; it can realize fast engraving and WEB web pages. Control, mobile phone APP control and other functions.

makerbase-mks/Klipper-for-MKS-Boards

makerbase-mks/CANable-MKS

makerbase-mks/MKS-Robin-Nano-V3.X

Robin nano V3 is an upgraded version of Robin Nano V2.0. The upgrade changes are quite large, including upgrading the MCU to the M4 core, and adding support for USB disk.

makerbase-mks/MKS-SERVO42C

MKS SERVO42C, an upgraded version of MKS SERVO42B, built-in Field-Oriented control algorithm, position/speed/ torque closed-loop, 4 Half bridge driver with 8 MOSFET, it makes the motor quieter, lower vibration and Lower calorific.

makerbase-mks/MKS-TinyBee

MKS TinyBee is a mainboard for 3d printing, based on ESP32 module

makerbase-mks/MKS-PI

As we all know, the Klipper firmware has the advantages of high printing speed, high precision, and the ability to use the web page to control the printer, etc. MKS PI is a high-end microcomputer board designed by makerbase to replace the Raspberry Pi for the convenience of 3D printing users to use the Klipper firmware. In terms of hardware, MKS PI has a powerful 4-core 64-bit SOC onboard, with 1GBytes of DDR3 memory, supports HDMI screen interface and PI-TS35 screen interface, provides Ethernet port, 3-channel USB interfaces (can be connected to a 3D printer main board, USB Wireless network card, USB camera, U disk, USB keyboard and mouse, etc.); In terms of software, Makerbase provides a complete Klipper firmware transplanted based on the Armbian desktop system, and directly supports klipperScreen. Users only need to download the image file provided by Makerbase, burn it to the TF card, without a lot of construction work, use the usb port or serial port to connect your main board, configure the parameters on the webpage, and you can use the Klipper firmware happily!

makerbase-mks/MKS-Monster8

MKS Monster8 is an 8-axis motherboard, which supports Voron printers and can run Marlin and Klipper firmware.

makerbase-mks/MKS-SKIPR

MKS SKIPR is an all-in-one board launched by Makerbase for running Klipper. It integrates the RK3328 SOC running the Klipper host and the STM32F407VET6 MCU responsible for executing specific machine actions. It meets the use of most 3D printers.

makerbase-mks/MKS-DLC32-FIRMWARE

The source code of MKS DLC32

makerbase-mks/MKS-StepStick-Driver

Include MKS TMC2209, MKS TMC2225, MKS TMC2208, MKS TB67S109 and so on

makerbase-mks/MKS-TFT-Hardware

Inculde MKS TFT24/28/32/35/70； MKS TS35/TS35-E3 Hardware

makerbase-mks/Marlin-2.x.x

Optimized firmware for RepRap 3D printers based on the Arduino platform.

makerbase-mks/ODrive-MKS

makerbase-mks/MKS-THR36-THR42-UTC

makerbase-mks/MKS-Robin-mini

MKS Robin Mini is a powerful 32-bit 3D printer control board with STM32F103VET6. Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 4 A4988 axis and software set current, hot bed, heating heads, 2 NTC100K, 1 MAX31855.The motherboard integrates After shutdown. Support MKS Robin WIFI for cloud printing and supports firmware update by SD card…

makerbase-mks/mks-wifi-plugin

MKS wifi plugin for cura

makerbase-mks/VESC-MKS

makerbase-mks/MKS-SERVO57A

Makerbase MKS SERVO57A NEMA23 closed loop stepper motor Driver CNC 3d printer parts prevents losing steps for Gen_L SGen_L

makerbase-mks/MKS-DUALFOC

makerbase-mks/MKS-Robin2

MKS Robin2 is a powerful 32-bit 3D printer control board with STM32F407ZET6 . the CPU 168MHZ. Support MKS Robin TFT35 Screens, use RobinTFT35 can preview model. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…

makerbase-mks/MKS-Big-Current-Driver

Include MKS TMC2160-OC 4.33A big current driver, MKS TB6600, MKS TB67S109-OC and so on

makerbase-mks/MKS-SERVO57C

makerbase-mks/MKS-Robin-lite3

MKS Robin Lite3 is a powerful 32-bit 3D printer control board with STM32F103RCT6 . Support Marlin2.0. Support MKS LCD12864B/MINI12864/LCD2004/12864 and MKS TFT Touch Screens. The main board integrates 5 AXIS interface, BLTOUCH interface, hot bed, 2 heating heads, 3 NTC100K and LCD screen SD card supports firmware update……

makerbase-mks/MKS-Robin-Pro

MKS Robin Pro is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support LCD2004/12864 and MKS Robin TFT24/28/32... Screens. The motherboard integrates 6 AXIS interface, BLTOUCH interface, hot bed, 3 heating heads, 4 NTC100K, 2 MAX31855,integrates SPI / UART interface and works with MKS TMC2130/TMC2208 V2.0/TMC2209, it can be used after plugged in, no soldering.LCD screen SD card supports firmware update……

makerbase-mks/MKS-OWL

MKS OWL motherboard is FDM 3d printing mainboard using an NXP LPC5528 32-bit Cortex-M33 MCU, it intergrated 5-axis plug-in stepper driver interfaces, supports MKS TS35 and MKS MINI12864 V3 , supports USB flash storage, and runs marlin v2.x firmware.

makerbase-mks/armbian-build

Armbian Linux Build Framework

makerbase-mks/TMC2240-LIB

Library for TMC2240 driver

makerbase-mks/MKS-SERVO35C