1、According to the content that needs to be updated, copy the following file to the SD card: (1)、update the config file：robin2_cfg.txt (2)、update images： mks_pic (3)、update font： mks_font (4)、update Robin firmware： Robin2.bin (5)、update Wifi firmware： MksWifi.bin 2、V1.0.1 Modifications: (1)、Fix the bug that read Large capacity sd card data error sometimes. (2)、Fix bug with manual shutdown invalid. (3)、Fixed a problem in which the title bar displayed abnormally during printing. (4)、Fixed bug where external drive printing would be skewed. (5)、Fixed a bug where moving too fast when manually leveling. 3、V1.0.2 Modifications: (1)、Fix the bug that read Large capacity sd card data error sometimes. (2)、Fixed a bug that model offset in printingin when connected external motor driver; (3)、Fixed a bug that after the bltouch leveling, the power failure continued print to hang; 4、V1.0.3 Modifications: (1)、Correct the problem of double limit; (2)、Open pulse hold time configuration item; (3)、Fix the bug that the configuration file is invalid when the pause position is modified; (4)、Fix the material break pause and resume printing misalignment; (5)、Correct the problem that the extrusion head will always heat up when the SD card cannot be read during printing; (6)、Fixed the problem that the interface name is displayed abnormally when the file name exceeds 150 bytes; (7)、Fix the problem that the file name is more than 30 bytes when the power is off and continue to play abnormally; (8)、Correct the problem that the machine stops after the material is cut off when printing the first layer; (9)、Added function: when there is no printing material, a prompt box pops up before printing the file; (10)、Corrected the problem of misalignment of printing when heating and cutting the material when executing M109 instruction; 4、Hardware schematic please see the 'Hardware' folder. ## Note - Thank you for using MKS products. If you have any questions during use, please contact us in time and we will work with you to solve it. - For more product dynamic information and tutorial materials, you can always follow MKS's Facebook/Twitter/Discord/Reddit/Youtube and Github. Thank you! - MKS Github: https://github.com/makerbase-mks - MKS Facebook: https://www.facebook.com/Makerbase.mks/ - MKS Twitter: https://twitter.com/home?lang=en - MKS Discord: https://discord.gg/4uar57NEyU - MKS Reddit: https://www.reddit.com/user/MAKERBASE-TEAM/
makerbase-mks/MKS-Robin2
MKS Robin2 is a powerful 32-bit 3D printer control board with STM32F407ZET6 . the CPU 168MHZ. Support MKS Robin TFT35 Screens, use RobinTFT35 can preview model. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
C