makerbase-mks/MKS-Robin-Nano-V3.X
Robin nano V3 is an upgraded version of Robin Nano V2.0. The upgrade changes are quite large, including upgrading the MCU to the M4 core, and adding support for USB disk.
GPL-3.0
Issues
- 0
Bootloop after uploading files in bootloader/Beep folder (Robin Nano V3.1)
#185 opened by hardlynoticeable - 0
missing binary operator before token "(" - Compiling in Visual Studio/Platformio fails
#184 opened by bstabens - 0
Icons problem
#183 opened by Davor1979 - 4
- 0
V3.2 info is missing
#182 opened by graccoon - 1
Question regarding HE1, HE0 and H-BED pinout
#181 opened by arhodiewithsoul - 0
CE certificate
#179 opened by hasansahin7 - 0
MKS TS35 V2.0 encoder is not working
#178 opened by mularoni123 - 2
- 1
Marlin 2.1.2 and Robin Nano v3.1 Failed to Build
#154 opened by AlvinTanto - 6
- 1
- 1
Marlin 2.1.2 and Robin nano v3.1 succeed to compile but white screen at the end
#157 opened by Bidouyiou55 - 0
homing failed printer halted please reset
#175 opened by shivahegde - 1
Babystep not work
#173 opened by FlyAAM - 8
- 1
MKS Robin nano board not connecting
#151 opened by 190349116 - 0
amirwadea4@gmail.com
#172 opened by AmirTantawi - 1
configaration file not updating
#171 opened by shivahegde - 0
Corrupt "ZIP" file
#170 opened by ysnuysl - 2
MKS Robin Nano v3.1, what the heck has happened?
#167 opened by Lucan07 - 0
2 estrusori e 2 assi z
#168 opened by giuliano68 - 1
Unable to scroll screen while tuning
#152 opened by 190349116 - 3
- 1
Can't Get New Board To Work
#166 opened by jpeero - 0
mks ts35-r v2.0
#165 opened by Stewie-040882 - 0
- 0
Unable to debug Marlin (loses SMD during bootload and bootloader is closed source)
#162 opened by RobertUK - 1
RO fan1 burned...
#140 opened by exilaus - 0
Whats the max current in the output 12/24v pin?
#160 opened by DaviBaechtold - 6
- 1
- 0
Robin Nano V3.1 + Fysetec TMC2209 3.1 and Homeless Homeless doesn't work on Klipper
#158 opened by Leidge - 1
Cannot flash standard Marlin to the Nano V3.1
#156 opened by refirendum - 0
Robin Nano v3.1 Build Issue
#155 opened by TamyraT - 1
- 2
Autohome and endstops don't seem to be working.
#150 opened by DLMorrell - 3
mks robin nano v3.1 jumper caps position
#149 opened by pulsar1955 - 0
Trying to configure firmware. Configuration example link on this page is dead, 404 error
#148 opened by jcmiracleman - 0
- 0
Setting automatic shutdown after printing
#146 opened by modelar350 - 0
可以提供bom表吗
#144 opened by rstg00po54 - 2
- 0
helpe tow trees bluer plus
#142 opened by ShadowHunter001122 - 0
Ayuda manual mks robin nano V3.1 jumpers
#141 opened by Sitozgz - 0
mks_robin nano v1.0
#139 opened by AllanBjr - 0
layer fan dont work
#138 opened by kabodos - 0
Can Someone Please Help
#137 opened by RickzFPV - 1
Marlin-2.1.1 - MKS_TS35_V2_0 - USE_M73_REMAINING_TIME
#136 opened by pagabee - 3