makerbase-mks/MKS-SKIPR

Issues

• Usb port for gcode storage.

  #89 opened 2 months ago by Futtawuh
  0

• TMC5160 configuration issues

  #88 opened 2 months ago by Chiefkeefersoutherland
  0

• Any One have diagram for MKS SKIPR V1.0?

  #49 opened 2 years ago by flishy2532
  3

• New image with actual kernel

  #73 opened a year ago by yammaster
  5

• unable to activate CAN0 native CANBUS

  #59 opened a year ago by DK4YA
  3

• bltouch dying

  #85 opened 5 months ago by mozg4D
  1

• ADXL345 Connection

  #87 opened 4 months ago by VHC2020
  0

• mks board wont boot anymore

  #86 opened 4 months ago by qwertymanzero
  0

• Ethernet connection doesn´t work

  #69 opened a year ago by Hirbl
  1

• CAN BUS skipr

  #47 opened 2 years ago by halk415
  8

• Connecting a USB LIS2DW / S2DW accelerometer

  #84 opened 6 months ago by roptics
  0

• Where to connect filament runout sensor?

  #83 opened 6 months ago by merlinbk
  2

• MCU protocol error in Klipper

  #78 opened 9 months ago by manuelchaves
  3

• ERROR! Shared TMC uarts need unique address or select_pins polarity (MKS SKIPR + TMC2209 MKS)

  #82 opened 8 months ago by johnbeer13
  1

• Outdate firmware

  #81 opened 8 months ago by chriskleov
  0

• eMMC and Balena Etcher failed

  #65 opened a year ago by rt1970
  2

• deleted

  #80 opened 9 months ago by rwetzel67
  0

• CAN BUS problem

  #79 opened 9 months ago by CarlosTortonese
  0

• HX711 ADC

  #77 opened 9 months ago by KIivian
  0

• how: identify hardware pwm pins

  #76 opened 10 months ago by BETLOG
  0

• I'm only seeing 0.05v on the endstop connections

  #75 opened 10 months ago by ZAKsPop
  1

• linux-headers-5.16.20-rockchip64

  #54 opened a year ago by Townie-au
  2

• Linux Shell access?

  #74 opened 10 months ago by jkaidor
  1

• MCU Protocol error

  #72 opened a year ago by BETLOG
  2

• Wifi dongle rtl8188fu not working

  #71 opened a year ago by FrankHovis
  0

• Sapphire Pro Skipr Installation Steps

  #46 opened 2 years ago by erchyn
  1

• USB Host power

  #48 opened 2 years ago by dpixel37
  2

• Always stop during printing, have to restart via power off!

  #70 opened a year ago by g1mi
  0

• probe endstop pin availability problem

  #68 opened a year ago by BETLOG
  0

• Rotate Screen MKS-TS35

  #67 opened a year ago by rt1970
  0

• ADXL345 & PI-TS35 Problem

  #40 opened 2 years ago by zu3st-de
  4

• Bltouch não responde

  #66 opened a year ago by Emeale2021
  0

• TMC2209 UART "Unable to read tmc uart 'stepper_x' register IFCNT" ERROR

  #62 opened a year ago by QTronics
  3

• HDMI 1024x600 60Hz

  #64 opened a year ago by fabry-68
  0

• CNC controller

  #63 opened a year ago by SpacePT
  0

• Dead Board?

  #42 opened 2 years ago by Bobblejot
  3

• Can I use CR Touch (from Ender 3) on the board?

  #60 opened a year ago by prondz
  1

• Board unresponsive for no apparent reason

  #61 opened a year ago by Skidtire
  1

• TMC2240 SPI

  #58 opened a year ago by vtr1000a
  0

• Question: how to switch boot device?

  #57 opened a year ago by luisillo26
  0

• Corrupted Boot Drive

  #56 opened a year ago by CalvesGEH
  1

• wifi doesn't reconnect on reboot.

  #55 opened a year ago by qwertymanzero
  1

• Wifi

  #50 opened 2 years ago by gallade785
  3

• Repair components

  #53 opened a year ago by cry4ge
  1

• TMC2209 v3.1 UART Error

  #41 opened 2 years ago by pt1c
  2

• How to disable buzzer on startup?

  #52 opened a year ago by Sofronio
  0

• Z2, Z3 and Z4 - convert do E2, E3 and empty?

  #51 opened 2 years ago by manuelchaves
  2

• Which image should i install??

  #44 opened 2 years ago by erchyn
  3

• No hardware to toggle

  #45 opened 2 years ago by DK4YA
  0

• [BUG] stepper Z not stopping after hitting endstop while homing

  #43 opened 2 years ago by prondz
  1