makermoekoe/Picoclick-C3

Issues

• 360 rotating gif

  #37 opened 9 months ago by assman
  0

• BUTTON Input gets too high Voltage on the ESP32 when running a full charged Li Ion Battery with 4.2 V

  #36 opened 10 months ago by frsoeteb
  0

• How large is the signal range?

  #24 opened 2 years ago by septatrix
  1

• flashing with Arduino IDE over native USB

  #35 opened a year ago by nuri2408
  0

• Add second button to schematic, with same wakeup function

  #34 opened a year ago by AshwinDeTaeye
  0

• Add second button to schematic, with same wakeup function

  #32 opened a year ago by AshwinDeTaeye
  2

• Picoclick C3 not recognized in Windows 11?

  #33 opened a year ago by tregota
  2

• C3 BOM and incomplete GitBook

  #31 opened a year ago by janausis
  0

• Value for capacitor C5 on the Picoclick c3

  #26 opened 2 years ago by piningforfjords
  5

• Missing Eagle Libraries and BOM not complete

  #30 opened a year ago by minkione
  0

• will you ever prooduce more?

  #29 opened 2 years ago by luigi-riefolo
  1

• ESPHome try again C3

  #28 opened 2 years ago by mnestor
  1

• General questions about ESP32-C3

  #27 opened 2 years ago by windorey
  11

• Battery monitoring Mosfet

  #25 opened 2 years ago by MukeshKumarRattu
  1

• how to flash this with ESPHome ?

  #19 opened 2 years ago by Zixim
  18

• Battery discharge at boot?

  #16 opened 2 years ago by gnistregn
  1

• Antenna impedance matching: F2 unknown

  #18 opened 2 years ago by fgardt
  2

• Capacitors

  #23 opened 2 years ago by mado89
  1

• Schematics missing for Picoclick C3

  #22 opened 2 years ago by septatrix
  5

• Is the battery voltage checked anywhere?

  #8 opened 3 years ago by septatrix
  15

• guidance with software

  #14 opened 2 years ago by Zixim
  5

• Chrystal specs

  #17 opened 3 years ago by callahan248
  2

• Could this make the total time even shorter?

  #13 opened 3 years ago by Fyod
  7

• Improve reference designators and orientation of U2

  #15 opened 3 years ago by poysh
  1

• Not espressif but impressive

  #3 opened 3 years ago by pshobowale
  6

• Flashing firmware via USB over JTAG

  #5 opened 3 years ago by hillstub
  0

• Not an issue, just question : USB-C Reference

  #12 opened 3 years ago by hallard
  2

• Rotary Encoder Push Button

  #7 opened 3 years ago by paulwratt
  0

• Break-out extra pins

  #9 opened 3 years ago by cpq
  2

• Pick and Place for PCBway?

  #11 opened 3 years ago by Fedack
  3

• port_common.c:129: undefined reference to `app_main'

  #10 opened 3 years ago by Bibbbi
  2

• PCB design

  #4 opened 3 years ago by Sirius3615
  2

• Source for board

  #6 opened 3 years ago by hariharan0077
  1

• Have BOM list ?

  #2 opened 3 years ago by Witawat
  2

• Where can I buy one or two

  #1 opened 3 years ago by 8bignic8
  1