/thermal-printer-converter

An Org Mode to ESCPOS converter

Primary LanguagePythonMIT LicenseMIT

Thermal Printer Converter

I bought a Zijiang-ZJ-58 from Amazon, but found that the existing Linux software did not print in the correct format, or not how I wanted. These scripts output in the ESCPOS format, which is what the printer uses internally.

Setup

Article Driver

sudo apt install build-essential cmake libcups2-dev libcupsimage2-dev
sudo apt install -y system-config-printer

Command line operation

Use

python3 TermalPrinterConverter.py
./printOutput.sh