ipgen is an Interactive Packet Generator with netmap|XDP
ipgen is a packet traffic generator that uses netmap or XDP. It can interactively output packets of various sizes and rates, and measure how many have been dropped.
ipgen is implemented using the netmap feature of FreeBSD or the XDP feature of Linux.
AF_XDP on Linux is developed and tested on Ubuntu 21.04. It should work on recent Fedora Linux too with some minor tweaks.
- setup FreeBSD and config kernel with NETMAP (add "device netmap" to conf/GENERIC).
- gmake, perl and libevent are required to compile.
- checkout and build
git clone git@github.com:iij/ipgen.git
cd ipgen
gmake depend && gmake && sudo gmake install
- run ipgen
You will need libbsd and other libraries etc. See below.
apt install libbsd-dev clang libssl-dev libevent-dev libbpf-dev bmake
git clone https://github.com/iij/ipgen.git
cd ipgen
make depend && make && sudo make install
- run ipgen
Tested on Ubuntu 22.04.
On linux, ipgen with AF_XDP uses only the 1st hardware queue on a netowrk adapter, so if the network adapter uses multiple hardware queues ipgen with AF_XDP doesn't work correctly.
You can check if your network adapter, say eth0, uses
multiple queues by ethtool -l eth0.
If so you can change the number of using queues to just one by:
ethtool -L eth0 combined 1
Please refer to the following presentation materials.
ipgen: Interactive Packet Generator for performance measurement