MATSim-Extensions by SBB

The following extensions for MATSim are provided by the Swiss Federal Railways (SBB, Schweizerische Bundesbahnen).

Step 1. Add the JitPack repository to you pom.xml.

  <repositories>
  	<repository>
  	    <id>jitpack.io</id>
  	    <url>https://jitpack.io</url>
  	</repository>
  </repositories>

Step 2. Add the dependency

 <dependency>
     <groupId>com.github.SchweizerischeBundesbahnen</groupId>
     <artifactId>matsim-sbb-extensions</artifactId>
     <version>0.9.x</version>
 </dependency>

SwissRailRaptor

The SwissRailRaptor is a fast public transport router. It is based on the RAPTOR algorithm (Delling et al, 2012, Round-Based Public Transit Routing), and applies several optimizations, namely in the selection which transfers need to be added and which transfers can be left out without influencing the outcome of the routing-process.

Actual performance gains vary by scenario, but are typically in the order of one to two magnitudes compared to the default pt router in MATSim. When applied to the complete public transport schedule of Switzerland (including trains, buses, trams, ships, cable-cars, ...), SwissRailRaptor was 95 times faster than MATSim's default pt router. In smaller scenarios, SwissRailRaptor was measured to be between 20 - 30 times faster. Memory consumption of SwissRailRaptor should also be at least one magnitude lower when compared to MATSim's default router, as should be the pre-processing time to initialize the router.

SwissRailRaptor acts as a drop-in replacement for the pt router included in MATSim by default. It does not require additional configuration, but re-uses the configuration parameters from the default transitRouter config group.

A major difference to the default transit router in MATSim is the fact that SwissRailRaptor does not repeat the transit schedule after 24 hours when searching for a route, but only takes the actual departure times as specified in the schedule into account. This is due to the fact that not all schedules have a periodicity of 24 hours. When applied in MATSim, it can result in agents no longer finding a route when departing late at night. Considering such agents would have gotten stuck in the simulation anyway due to no scheduled pt vehicles running at that time the next day, this should not pose any real problem.

Have a look at the class ch.sbb.matsim.RunSBBExtension included in the repository to see how to enable SwissRailRaptor when running MATSim.

Deterministic Public Transport Simulation

The deterministic pt simulation is a QSim engine, handling the movement of public transport vehicles in MATSim. The default TransitQSimEngine simulates all pt vehicles on the queue-based network. While this works well for buses that share the road-infrastructure with private car traffic, it has some drawbacks when simulating railway transportation. Most notably, trains don't always run at the highest speed allowed on links (rails) in reality, often resulting in early arrivals when being simulated.

The deterministic pt simulation does not simulate the pt vehicles on the queue network, but uses its own data structure and "teleports" the vehicles from stop to stop according to the departure and arrival times specified in the schedule. Thus, the vehicles operate strictly according to the transit schedule, hence the name "deterministic" pt simulation.

It is possible to configure the deterministic pt simulation in a way that not all pt vehicles are simulated deterministically, but that some (e.g. buses) are still simulated on the queue network and are thus able to interact with private car traffic.

Usage

To use the deterministic pt simulation, a few things need to be taken into account:

transportMode of TransitRoutes

When specifying TransitRoutes in a transit schedule, provide a meaningful transportMode to the routes:
```
<transitLine id="1">
  <transitRoute id="1">
    <transportMode>train</transportMode>
    <routeProfile>...</routeProfile>
    ...
  </transitRoute>
</transitLine>
```
The transportMode specified in the transit routes is used to determine whether the vehicles serving that route should be simulated using the deterministic pt simulation, or on the queue network. By using modes like train, bus, metro you can specify which of those should be simulated deterministically (e.g. train and metro), and which should be simulated on the network (e.g. bus).

Do not use pt as a transportMode in transit routes. This interferes with the mode pt that passengers use to specify that they want to use a public transport service. The deterministic simulation will throw an exception if a transit route with mode pt should be simulated deterministically.
config.xml

You need an additional config module in your config.xml:
```
<module name="SBBPt" >
  <param name="deterministicServiceModes" value="train,metro" />
  <param name="createLinkEvents" value="true" />
</module>
```
The first parameter deterministicServiceModes lists all transportModes of transit routes that should be simulated deterministically. Multiple modes are separated by a comma in the parameter's value. All transportModes of transit routes not specified in this list will be simulated on the queue network as usual.

The second parameter createLinkEvents specifies if LinkEnter- and LinkLeave-events should be generated for vehicles simulated by the deterministic pt engine. As pt vehicles are teleported between stops by the deterministic pt simulation, they do not create any Link-events by default. But for visualization or analysis purposes it might still be useful to have such events as if the vehicles were actually driving along the links. Set the parameter to true to make the deterministic pt simulation create appropriate Link-events.

Have a look at the class ch.sbb.matsim.RunSBBExtension included in the repository to see how to enable the deterministic pt simulation when running MATSim. If you already have your own QSimModule, have a look at ch.sbb.matsim.mobsim.qsim.SBBQSimModule to see how you can integrate just the deterministic pt simulation in your own QSim setup.

manserpa/matsim-sbb-extensions

MATSim-Extensions by SBB

SwissRailRaptor

Deterministic Public Transport Simulation

Usage