SmartPi Energy Monitor

Forum

https://forum.enerserve.eu

Installation

Download Raspbian Jessie Lite from https://www.raspberrypi.org/downloads/raspbian/ and copy it on your SD card. Alternatively, you may download EmonSD, a pre-built SD card image for Raspberry Pi running as an emonPi/emonBase Download https://github.com/openenergymonitor/emonpi/wiki/emonSD-pre-built-SD-card-Download-&-Change-Log

Update packet list and update packages

sudo apt-get update
sudo apt-get upgrade

Install additional packages.

$ sudo apt-get install sqlite3 git i2c-tools avahi-daemon

For building SmartPi tools, additional packages are required.

sudo apt-get install libpam0g-dev

Enable i2c kernel module

i2c-dev is required for communicating with the SmartPi.

To check to see if the module is loaded:

sudo lsmod | grep i2c

This should return something like this:

i2c_dev                 5859  0
i2c_bcm2708             4834  0

If the module is not listed, add it to the system.

echo 'i2c-dev' | sudo tee -a /etc/modules
sudo modprobe 'i2c-dev'

Test if i2c is correctly enabled:

i2cdetect -l

The output should list your I2C channel. "i2c-1" in my case.

i2c-1   i2c             20804000.i2c                            I2C adapter

Scan I2C bus for connected devices

Channel 1 in my case

i2cdetect -y 1

In case of an SmartPi connected to an RPI3, the output should look like this:

     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- 38 -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

Remove old go version

sudo apt-get remove golang
sudo apt-get autoremove

Install go

Download the archive and extract it into /usr/local, creating a Go tree in /usr/local/go. Currently version 1.8.1 is up to date. You may need to adapt the filename according to latest version.

cd /usr/local
curl -s https://storage.googleapis.com/golang/go1.8.1.linux-armv6l.tar.gz | sudo tar -xvz
echo 'PATH="/usr/local/go/bin:${PATH}"' | sudo tee -a /etc/profile

In order for the ${PATH} to be updated, you will need to logout.

Create a directory to contain your Go workspace, for example ${HOME}/go, and set the GOPATH environment variable to point to that location.

mkdir "${HOME}/go"
export GOPATH="${HOME}/go"

Building source

go get -v github.com/nDenerserve/SmartPi/src/smartpi
cd ${GOPATH-$HOME/go}/src/github.com/nDenerserve/SmartPi
make

NOTE: If you need to build from a fork, you will have to symlink your fork into ${GOPATH-$HOME/go}/src/github.com/nDenerserve/ to make golang dependencies work correctly.

emonSD Specifics

The emonSD provides a read-only file system for most areas. You can mount the file system with write privileges by rpi-rw in order to edit files. rpi-ro reverts write privileges again. /home/pi/data is always mounted with write access. This is the location where you need to place your SmartPi database and current values file. In SmartPi's configif file /etc/smartpi you may set the following settings to move all files SmartPi is writing into.

[database]
dir="/home/pi/data/smartpi"

[device]
shared_dir="/home/pi/data/smartpi"

Change Log

11/28/11/16

Added MQTT Client
producecounter and consumecounter files make use of Databasedir -> co-located to rrd database
fixed "}" compilation issue
Added this readme.md

ToDo's:

Logging
Improved error handling

02/10/17

changed from rrdtool to sqlite3
added csv-export
changed from Bootstrap to Angular Material
change datelayout in API to RFC3339
fixed errors in datehandling
added week consumption

manutoky/SmartPi