- 104NT-4-R025H42G Temperature sensor
- Undo inversion of extruder 0
- Uart enabled for X1, X2, Y, Z Axis
- Replaced TMC2208 on z axis with TMC2209
- Enable TMC_DEBUG
- Disabled Linear Advanced for now
This version of the firmware is based from the 2.0.9.3 Version of the Upstream Marlin Project.
The current Version is only for Stock Printers.
These are My contributions to the Artist-D community, These version of firmware are not supported by JGMaker
These are pre-releases driven by the community in conjunction with JGMaker. Beta Releases are not officially supported; yet.
- Twinkie v2021.5 - Download v2021.5
- Possible Hemera Release?
These are dedicated members of the Artist-D community, These version of firmware are not supported
- https://github.com/mikejr83/Marlin-ArtistD/releases/ These are My contributions to the Artist-D PRO community
- https://www.buymeacoffee.com/TwinkieXLII/new-firmware-artist-d-pro
- Get the inital release of the Official Firmware: https://github.com/JGMaker3dofficial/artistd/releases/tag/1.1.2
This version of the firmware is based from the 2.0.0 Version of Marlin.
There are some instructions here for setting your repository with the upstream Marlin Source. https://docs.github.com/en/github/collaborating-with-issues-and-pull-requests/configuring-a-remote-for-a-fork
$ git remote add upstream https://github.com/MarlinFirmware/Configurations.git
Thie will set an upstream remote that you can fetch and merge from.
#Join the Community Checkout our Discord Server