/Assistant-Relay-for-Hassio

Send commands (including broadcasts) to the Google Assistant via Home Assistant

Primary LanguageDockerfileGNU General Public License v3.0GPL-3.0

Supports amd64 Architecture Supports armv7 Architecture Supports aarch64 Architecture Supports armhf Architecture Supports i386 Architecture Maintained

No longer maintained

Assistant Relay is no longer maintained, due to lack of time for the project of the creator of Assistant Relay. Also he has no personal need for Assistant Relay anymore. Therefore I have decided to stop maintaining the Docker image (and Hassio add-on) as well. The image will no longer be updated. That also means that the OS of the image will not be updated as well, including security updates.

Assistant Relay for Hassio

This add-on brings Assistant Relay to Hass.io.

Assistant Relay is a Node.js server that exposes the Google Assistant as a REST API. Send Assistant Relay any query you would send the Google Assistant, and get a response back.

It also supports the Google Home Broadcast command so you can send audio notifications to your Google Home devices, without interrupting music.

Getting started

To use this add-on you need to have Hass.io running. If you are not using Hass.io you should use the docker image or install Assistant Rely directly on your system.

Installation

  1. Go to Supervisor in the sidebar and click on Add-on Store
  2. Add https://github.com/Apipa169/Assistant-Relay-for-Hassio under "repositories"
  3. The add-on Assistant Relay should now show up below. Click on it and click on "Install". This may take a while, depending on your internet and system speed.

Configuration

  1. You do not need to configure anything at the add-on page. Click "Start" to run the add-on
  2. Check the log below to see if it's running.
  3. Click on "Open web UI" or go to http://[IP]:[PORT] in your browser.
  4. Follow the instructions in the browser.
  5. You can now use Assistant Relay.

The IP must be the IP address of your system, not the one mentioned in the log as this is the address of the container. The port is 3000 by default Configure your client in Google Cloud Platform as Desktop app

Changing the port number

If you want to change the port of Assistant Relay, please do this in the add-on settings and leave the Assistant Relay setting on port 3000.

Examples

User needs always to be the user you used in the setup of AR. Multiple users is suported by AR.

Home Assistant REST

Example command to broadcast via a rest command.

# Example configuration.yaml
rest_command:
  assistant_broadcast:
    url: http://192.168.10.2:3000/assistant
    method: POST
    content_type: 'application/json'
    payload: '{"command":"{{ command }}", "user":"username", "broadcast":true}'
    
  assistant_converse:
    url: http://192.168.10.2:3000/assistant
    method: POST
    content_type: 'application/json'
    payload: '{"command":"{{ command }}", "user":"username", "converse":true}'

  assistant_relay:
    url: http://192.168.10.2:3000/assistant
    method: POST
    content_type: 'application/json'
    payload: '{"command":"{{ command }}", "user":"username"}'
# Example test lovelace card
type: entities
entities:
  - action_name: Broadcast
    name: test broadcast
    service: rest_command.assistant_broadcast
    type: call-service
    service_data:
      command: hello, this is a test broadcast
# Automation action example (just fill in "command: hello" if you are using the editor)
  action:
  - data:
      command: hello
    service: rest_command.assistant_broadcast

Node Red Example

Simple flow for Node Red which can be imported. Copy all the code and go to the hamburger menu > import in NodeRed.

Don't forget to change the IP address, port and user after you have imported this sequence.

[{"id":"cb8e2985.0fd68","type":"comment","z":"e0fa9d52.876058","name":"Broadcast via Google Home","info":"","x":180,"y":180,"wires":[]},{"id":"37f701c2.826d96","type":"delay","z":"e0fa9d52.876058","name":"","pauseType":"rate","timeout":"5","timeoutUnits":"seconds","rate":"1","nbRateUnits":"10","rateUnits":"second","randomFirst":"1","randomLast":"5","randomUnits":"seconds","drop":true,"x":320,"y":220,"wires":[["d087aae2.ab98e"]]},{"id":"eba065b9.0d066","type":"http request","z":"e0fa9d52.876058","name":"post","method":"POST","ret":"obj","paytoqs":false,"url":"http://192.168.1.2:3000/assistant","tls":"","persist":false,"proxy":"","authType":"","x":730,"y":220,"wires":[[]]},{"id":"d087aae2.ab98e","type":"function","z":"e0fa9d52.876058","name":"set payload and headers","func":"msg.message = msg.payload;\nmsg.payload = {\n    \"name\": \"username\",\n    \"command\": msg.message,\n    \"broadcast\": true\n};\nmsg.headers = {};\nmsg.headers['Content-Type'] = 'application/json';\nreturn msg;","outputs":1,"noerr":0,"x":530,"y":220,"wires":[["eba065b9.0d066"]]},{"id":"e63ec3ee.7abb68","type":"inject","z":"e0fa9d52.876058","name":"","topic":"","payload":"Hello everyone!","payloadType":"str","repeat":"","crontab":"","once":false,"onceDelay":0.1,"x":140,"y":220,"wires":[["37f701c2.826d96"]]}]

Assistant Relay in Docker without Hass.io

If you are not running Hass.io you can run Assistant Relay in docker using this image: https://github.com/Apipa169/Assistant-Relay-Docker

More documentation

More documentation is available at https://greghesp.github.io/assistant-relay/

Credit

This add-on is using (the awesome) Assistant Relay made by Greghesp.