/ThermoAverage

Calculate Average Temperature with Thermistor

Primary LanguageC++GNU General Public License v3.0GPL-3.0

ThermoAverage

Calculate Temperature with Thermistor taking the average of measured samples.

Requirements

Hardware: This library was developed to Arduino AVR

Boards tested:

Arvuino Uno
Arduino Nano 328/168
Arduino Mini

Software: Any Arduino IDE >= 1.3.0 should be fine

Hardware Installation

The ThermoAverage use any Analog Input.

The VCC can be 5 V or 3.3 V (better...).

diagram

Library Installation

  1. Download the ZIP file from https://github.com/marcialf/ThermoAverage/archive/master.zip
  2. From the Arduino IDE: Sketch -> Include Library... -> Add .ZIP Library...
  3. Restart the Arduino IDE to see the new "ThermoAverage" library.

See the comments in the example sketches for details about how to try them out.

Give the example

And repeat

until finished

End with an example of getting some data out of the system or using it for a little demo

Examples

This library including the following example:

ThermoAverageExample: Simple temperature mesuarement with 10 samples.

Running the tests

Explain how to run the automated tests for this system

Break down into end to end tests

Explain what these tests test and why

Give an example

And coding style tests

Explain what these tests test and why

Give an example

Built With

Authors

  • Marcial Fernandez - Initial version - marcialf

License

This project is licensed under the GPL License - see the LICENSE file for details.