Pinned Repositories
Binary-Clock-Shield-for-Arduino
Binary Clock Shield for Arduino
FlipDisc
Arduino Library for Flip-disc Displays. The library allows you to easily control flip-disc displays connected in series. You can connect up to 8 different displays in any order. This library is intended for use with the displays designed by www.Flipo.io - Marcin Saj.
Flipo-Clock-4x7-Segment-Flip-Disc-Display
7-Segment Flip-disc Clock - Arduino based
IN2-Binary-Nixie-Clock
Binary Nixie Clock with 18 x IN-2 Nixie Tubes for Arduino Nano / Nano IoT 33 / Nano Every and Particle Photon.
IoT-Arduino-Nixie-Clock-Shield
Use your Arduino and build IoT Nixie Clock, Thermometer and Hygrometer. You can control the clock via the Arduino Cloud, you can send data to the cloud then transfer it to e.g. Google sheets and visualize (e.g. temperature or humidity). You can also use the Alexa Amazon assistant.
Nixie-Clock-Thermometer-Hygrometer-Arduino-Shield
Use your Arduino and build Nixie Clock, Thermometer and Hygrometer. Beautifully made housing and easy to operate. It’s perfect device for your desk.
Nixie-Tube-Driver
Nixie Tube Driver V1 - Easy to use - only 3 control lines. Multiple drivers can be connected in series. 10 high-voltage outputs for nixie cathodes. Compatible with 5V and 3.3V (IO & VCC). Example code available for Arduino. Prepared libraries for use in your own projects - Eagle, Altium, KiCad and EasyEDA. It can successfully replace older drivers such as 155ID1 or 74141 and even new ones (HV5812, HV5530 etc.).
Nixie-Tube-Driver-V2
Nixie Tube Driver V2 - Easy to use - only 3 control lines. Multiple drivers can be connected in series. 22 high-voltage outputs for nixie cathodes. Compatible with 5V and 3.3V (IO & VCC). Example code available for Arduino. Prepared libraries for use in your own projects - Eagle, Altium, KiCad and EasyEDA. It can successfully replace older drivers. https://www.NixieTester.com
Nixie-Tube-Sockets
The Nixie Sockets were created to unify the entire family of nixie tubes. All sockets have the same pin layout which allows easy replacement of the sockets for different nixie tubes without having to any hardware change. When using the sockets with your device, sockets provides the valid power supply parameters for the compatible nixie tubes (supply voltage and current).
RTC_RX8025T
Arduino library for the Seiko Epson RX8025T RTC.
marcinsaj's Repositories
marcinsaj/Nixie-Tube-Sockets
The Nixie Sockets were created to unify the entire family of nixie tubes. All sockets have the same pin layout which allows easy replacement of the sockets for different nixie tubes without having to any hardware change. When using the sockets with your device, sockets provides the valid power supply parameters for the compatible nixie tubes (supply voltage and current).
marcinsaj/Nixie-Tube-Driver-V2
Nixie Tube Driver V2 - Easy to use - only 3 control lines. Multiple drivers can be connected in series. 22 high-voltage outputs for nixie cathodes. Compatible with 5V and 3.3V (IO & VCC). Example code available for Arduino. Prepared libraries for use in your own projects - Eagle, Altium, KiCad and EasyEDA. It can successfully replace older drivers. https://www.NixieTester.com
marcinsaj/Nixie-Tube-Driver
Nixie Tube Driver V1 - Easy to use - only 3 control lines. Multiple drivers can be connected in series. 10 high-voltage outputs for nixie cathodes. Compatible with 5V and 3.3V (IO & VCC). Example code available for Arduino. Prepared libraries for use in your own projects - Eagle, Altium, KiCad and EasyEDA. It can successfully replace older drivers such as 155ID1 or 74141 and even new ones (HV5812, HV5530 etc.).
marcinsaj/RTC_RX8025T
Arduino library for the Seiko Epson RX8025T RTC.
marcinsaj/IoT-Arduino-Nixie-Clock-Shield
Use your Arduino and build IoT Nixie Clock, Thermometer and Hygrometer. You can control the clock via the Arduino Cloud, you can send data to the cloud then transfer it to e.g. Google sheets and visualize (e.g. temperature or humidity). You can also use the Alexa Amazon assistant.
marcinsaj/Flipo-Clock-4x7-Segment-Flip-Disc-Display
7-Segment Flip-disc Clock - Arduino based
marcinsaj/FlipDisc
Arduino Library for Flip-disc Displays. The library allows you to easily control flip-disc displays connected in series. You can connect up to 8 different displays in any order. This library is intended for use with the displays designed by www.Flipo.io - Marcin Saj.
marcinsaj/Flipo-7-Segment-Flip-Disc-Display
7-segment flip-disc display. The displays can be connected in series. Control via dedicated library for Arduino.
marcinsaj/Flipo-Binary-Clock-2x6-Flip-Disc-Display
Binary clock with Flip-disc display. Custom controller with ATmega328, uses MiniCore.
marcinsaj/ONE-Nixie-Clock
The ONE is a single digit Nixie Clock. With 26 interchangeable nixie tube sockets, this unique device allows you to connect most existing nixie tubes. The clock is based on Arduino Nano and allows you to connect to the Arduino IoT Cloud, control from smartphone app and even voice control via Alexa voice assistant.
marcinsaj/Flipo-1x7-Flip-Disc-Display
1x7 flip-disc display. Control via dedicated library for Arduino.
marcinsaj/Flipo-Arduino-Controller-no-1
Dedicated controller for flip-disc displays based on Arduino
marcinsaj/Nixie-Socket-Driver
Easy to use nixie socket driver – only 3 control lines. Multiple drivers can be connected in series. Compatible with 5V and 3.3V (IO & VCC). Can be used with multi-cathode nixie tubes e.g. B-7971 (with dedicated nixie sockets). Example code available for Arduino.
marcinsaj/Nixie-Tube-Driver-V3
Nixie Tube Driver V3 - Easy to use - only 3 control lines. 40 high-voltage outputs for nixie cathodes. Multiple drivers can be connected in series. Compatible with 5V and 3.3V (IO & VCC). Example code available for Arduino.
marcinsaj/Pro-Nixie-Tube-Socket-RZ568M
Nixie Socket with Driver dedicated for RZ568M Nixie Tube
marcinsaj/.github
marcinsaj/Flipo-1x3-Flip-Disc-Display
1x3 flip-disc display. Control via dedicated library for Arduino.
marcinsaj/Flipo-2x1-Flip-Disc-Display
2x1 flip-disc display. Designed to work with a 7-segment flip-disc display. Control via dedicated library for Arduino.
marcinsaj/Flipo-2x1x7-Flip-Disc-Display-Arduino-Shield
marcinsaj/Flipo-2x6-Flip-Disc-Display
2x6 flip-disc display. Control via dedicated library for Arduino.
marcinsaj/Flipo-3x1-Flip-Disc-Display
3x1 flip-disc display. Designed to work with a 7-segment flip-disc display. Control via dedicated library for Arduino.
marcinsaj/Flipo-3x3-Flip-Disc-Display
3x3 flip-disc display. Control via dedicated library for Arduino.
marcinsaj/Flipo-4x1x3-Flip-Disc-Display-Arduino-Shield
marcinsaj/Flipo-Clock-6x7-Segment-Flip-Disc-Display
marcinsaj/Flipo-Flip-disc-Display-Specification
marcinsaj/Flipo-Pulse-Shaper-Power-Supply
Power supply module for flip-disc displays designed by www.Flipo.io
marcinsaj/Hardware-Switch-Debouncer
marcinsaj/library-registry
Arduino Library Manager list
marcinsaj/marcinsaj
marcinsaj/Nixie-Power-Supply-Module
https://nixietester.com