Netatmo

Ruby API Wrapper for the Netatmo API.

Installation

Add this line to your application's Gemfile:

gem 'netatmo'

And then execute:

$ bundle

Or install it yourself as:

$ gem install netatmo

Usage

Environment variables

Name	Description
`NETATMO_CLIENT_ID`	Your app client_id
`NETATMO_CLIENT_SECRET`	Your app client_secret
`NETATMO_USERNAME`	User address email
`NETATMO_PASSWORD`	User password

Creating a client

To create a Netatmo client you can either set the required environment variables or pass the credentials via a config block to the initialize method.

# if you configured the required ENV variables
client = Netatmo::Client.new

# or if you want to provide the required credentials
client = Netatmo::Client.new do |config|
  config.client_id = '10acb39bc818e5789'
  config.client_secret = '10dsfxyzbkzva'
  config.username = 'user@email.address'
  config.password = 'UserPassword'
end

Endpoint `/getstationdata`

get_station_data Returns all weather stations you have read access to.

station_data = client.get_station_data
# => #<Netatmo::Weather::StationData @devices=[...] @user=#<Netatmo::User> ...>

Devices

You can access the base stations in the devices array.

station_data.devices

# => [
#      #<Netatmo::Weather::BaseStation @id="00:11:22:00:11:22", @modules=[...] ...>,
#      #<Netatmo::Weather::BaseStation @id="12:23:34:45:56:67", @modules=[...] ...>
#    ]

base_station = station_data.devices.first
# => #<Netatmo::Weather::BaseStation @id="00:11:22:00:11:22", @code="NAMain", @data_types=["Temperature", "CO2", "Humidity", "Noise", "Pressure"], @modules=[...]>

Modules

All to this base station connected modules are accessible in the modules array.

base_station.modules
# => [
#      #<Netatmo::Weather::OutdoorModule @code="NAModule1", @data_types=["Temperature", "Humidity"], ...>,
#      #<Netatmo::Weather::WindGauge @code="NAModule2", @data_types=["Wind"], ...>,
#      #<Netatmo::Weather::IndoorModule @code="NAModule4", @data_types=["Temperature", "CO2", "Humidity"], ...>,
#      #<Netatmo::Weather::RainGauge @code="NAModule3", @data_types=["Rain"], ...>
#    ]

outdoor = base_station.modules.first

# =>  #<Netatmo::Weather::OutdoorModule
#       @id="11:22:33:44:55:66",
#       @code="NAModule1",
#       @data_types=["Temperature", "Humidity"],
#       @module_name="Module",
#       @reachable=true,
#       @firmware=44,
#       @last_setup=2014-12-24 21:57:28 +0100,
#       @last_message=2020-02-11 10:49:33 +0100,
#       @last_seen=2020-02-11 10:49:27 +0100,
#       @rf_status=66,
#       @battery_vp=5440,
#       @battery_percent=77,
#       @battery_status=#<Netatmo::BatteryStatus::OutdoorBatteryStatus @value=5440>,
#       @humidity=#<Netatmo::DashboardData::Humidity @time=2020-02-11 10:48:36 +0100, @value=62.0, @unit="%">,
#       @temperature=#<Netatmo::DashboardData::Temperature @time=2020-02-11 10:48:36 +0100, @value=13.6, @min=7.6,
#       @max=13.6, @min_date=2020-02-11 07:12:25 +0100, @max_date=2020-02-11 10:48:36 +0100,
#       @trend=#<Netatmo::Util::TempTrend @value=1>,
#       @unit="°C">
#     >

Data Types

You can ask the module if it provides certain data types.

outdoor.temperature?
# => true

outdoor.noise?
# => false

If the data type is supported you can access the values.

outdoor.temperature
# => #<Netatmo::DashboardData::Temperature @value=13.6, @min=7.6, @max=13.6, @unit="°C", @time=2020-02-11 10:48:36 +0100, @trend=#<Netatmo::Util::TempTrend @value=1>, ...>

Values

If you want to get a hash of all the available data types on the module you use the values method.

outdoor.values
# => {
#      :humidity=>#<Netatmo::DashboardData::Humidity ...>,
#      :temperature=>#<Netatmo::DashboardData::Temperature ...
#    }

Development

After checking out the repo, run bin/setup to install dependencies. Then, run rake test to run the tests. You can also run bin/console for an interactive prompt that will allow you to experiment.

To install this gem onto your local machine, run bundle exec rake install. To release a new version, update the version number in version.rb, and then run bundle exec rake release, which will create a git tag for the version, push git commits and tags, and push the .gem file to rubygems.org.

Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/marcoroth/netatmo-ruby.

License

The gem is available as open source under the terms of the MIT License.

marcoroth/netatmo-ruby