mariolukas/FabScanPi-Server

Issues

• Power consumption Raspberry Pi 3 Model B+ and FabScanPI HAT

  #122 opened 7 months ago by mariolukas
  2

• Add Motor Versions to Documentation

  #125 opened 7 months ago by mariolukas
  0

• Add option to allow anonymous usage data collection

  #79 opened 7 months ago by cemonds
  1

• Fabs

  #152 opened 2 years ago by SimianSilverback
  0

• v0.10.2: Calibration process was not able to estimate laser planes.

  #149 opened 3 years ago by schuderer
  2

• "normal" and "distance" parameters in configs

  #148 opened 3 years ago by metobom
  1

• The FabScanPi server is currently not running

  #145 opened 4 years ago by Faraznassajian
  7

• Calibration

  #146 opened 4 years ago by Faraznassajian
  2

• rotation of camera in config file does not work in settings mode

  #105 opened 4 years ago by mariolukas
  1

• WebUI doesn't shows scan progres if no Internet

  #131 opened 4 years ago by iadegesso
  4

• End of file problem while loading ply file in meshlab.

  #133 opened 4 years ago by mariolukas
  1

• MeshLab Meshing tasks fails.

  #136 opened 4 years ago by mariolukas
  1

• Starting a scan fails with only one laser when configuration entry is set to two lasers.

  #144 opened 4 years ago by mariolukas
  0

• Camera rotation does not work and results in stuck server

  #140 opened 4 years ago by KayIO
  2

• Changelog???

  #143 opened 4 years ago by Azubiwork
  1

• Threshold value seems to be without effect.

  #135 opened 5 years ago by mariolukas
  1

• The FabScanPi server is currently not running

  #139 opened 5 years ago by KayIO
  5

• Change FabScanPi sudoers entry.

  #137 opened 5 years ago by mariolukas
  1

• add system.d service file to debian package.

  #138 opened 5 years ago by mariolukas
  1

• Critical, fatal error 'NoneType' object has to no attribute 'read'

  #128 opened 5 years ago by PhistterbutInc
  4

• flash_baudrate in config, no connection to Arduino

  #114 opened 5 years ago by brummbaer
  0

• fabscan.scanner.laserscanner.FSImageProcessor - ERROR - list index out of range

  #117 opened 5 years ago by puravbhardwaj
  1

• Regular UI freezes, high cpu load, scans look like potato

  #124 opened 5 years ago by ragflyer
  6

• scanner crahes after changing number of laser from 1 to 2

  #132 opened 5 years ago by mariolukas
  1

• File Manager does not work. Files can not be downloaded.

  #134 opened 5 years ago by mariolukas
  2

• New dialog for testing and aligning hardware

  #100 opened 5 years ago by mariolukas
  2

• fix upgrading procedure, dist-upgrade script fails while waiting for user input

  #111 opened 5 years ago by mariolukas
  0

• FSSerrial.py - support checkup for different baud rates.

  #95 opened 5 years ago by mariolukas
  0

• Feature Request - Atlas/Ciclop compatibility

  #123 opened 5 years ago by wer-is-paul
  4

• Improve calibration section of Documentation

  #126 opened 5 years ago by mariolukas
  0

• Following clean install instructions leads to following error

  #130 opened 5 years ago by PhistterbutInc
  5

• Using HE3D Open Source Ciclop attached to Pi. Is that possible?

  #129 opened 5 years ago by mperino
  4

• Camera orientation, size and the frame dimension setting

  #90 opened 6 years ago by dlarue
  5

• No Connection to Arduino when there is - Sanguino

  #87 opened 6 years ago by dlarue
  15

• Scanning stops at Position 51

  #115 opened 6 years ago by brummbaer
  6

• hardcoded steps/revolution in FSTurntable.py

  #118 opened 6 years ago by doc2005
  10

• [not an issue] Is this project still under active development / support?

  #121 opened 7 years ago by careyer
  3

• check for enough diskspace before scan

  #113 opened 7 years ago by mariolukas
  0

• Access via Zeroconf for windows users

  #84 opened 7 years ago by mariolukas
  0

• add better default mlx meshlab meshing filter scripts

  #106 opened 7 years ago by mariolukas
  0

• calibration data is not saved in config file

  #104 opened 7 years ago by mariolukas
  0

• add how to flash a boot loader with raspberry pi or Arduino to F.A.Q

  #107 opened 7 years ago by mariolukas
  0

• Fix Travis config and add new credentials to Travis config

  #80 opened 7 years ago by mariolukas
  1

• fix update notification bug.

  #101 opened 7 years ago by mariolukas
  1

• add settings and connections for netconnecd

  #102 opened 7 years ago by mariolukas
  0

• autocalibration branch: free memory after pointcloud was send to browser.

  #93 opened 7 years ago by mariolukas
  0

• autocalibration branch: fix pointcloud class

  #92 opened 7 years ago by mariolukas
  0

• autocalibration branch: add option to invert motor direction

  #91 opened 7 years ago by mariolukas
  0

• Calibration confusion

  #89 opened 7 years ago by dlarue
  4

• Frontend loading problem, when FabScan is not connected to the internet.

  #83 opened 8 years ago by mariolukas
  1