This repository contains the hardware design files (KiCad) for the PER|FORMER eurorack sequencer.
For more information on the project go here.
The firmware is hosted in a separate repository here.
The schematic is available as a PDF.
| Board | Width (mm) | Height (mm) |
|---|---|---|
| PCB | 171.45 | 106.68 |
| Frontpanel | 172.5 | 128.27 |
The width of the module is 34 HP in eurorack standard.
The BOM is available as a CSV and HTML. In addition to the parts on the PCB there are a few additional hardware components that are necessary to complete the build, see here.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
