markniu/PandaPi

Issues

• Is this project abandoned?

  #49 opened 6 months ago by adaliszk
  2

• Is the RT kernel absolutely necessary when running Klipper on PandaPi 2.9?

  #48 opened a year ago by padcom
  0

• Running Klipper mode fails

  #47 opened a year ago by padcom
  1

• Update Marlin

  #46 opened a year ago by WispyCombover
  0

• Z motor PINs for Klipper

  #45 opened 2 years ago by patofoto
  9

• Klipper on Panda Pi 2.5?

  #44 opened 2 years ago by padcom
  1

• PandaPi and Plotter

  #43 opened 2 years ago by patofoto
  0

• unused PWM output signal

  #42 opened 2 years ago by GHubensG
  5

• G33 failing consistently

  #29 opened 4 years ago by AmEv7Fam
  3

• Error on compiling: expected unqualified-id before numeric constant

  #41 opened 3 years ago by AmEv7Fam
  0

• Design choice question

  #40 opened 3 years ago by kpishere
  1

• PandaPI with Anet LCD12864 does not work

  #36 opened 3 years ago by Egbert51
  3

• Put products on amazon?

  #38 opened 3 years ago by TimTheToaster
  1

• BLTOUCH_SET_5V_MODE is not compatible with the Z_MIN Creality CR10 Marlin-2.0.x

  #39 opened 3 years ago by Ground-Source
  1

• OctoPrint - Python 3?

  #32 opened 4 years ago by jneilliii
  8

• [feature request] seperate config from source code

  #37 opened 3 years ago by Moorviper
  0

• Program porting process

  #35 opened 3 years ago by YL-martin
  3

• submit to hacker news / ycombinator

  #34 opened 3 years ago
  1

• [suggestion/question] Compute Module/CM4

  #30 opened 4 years ago by NickSlash
  2

• Files

  #5 opened 5 years ago by furkanbr
  6

• [feature-request] update octoprint to python 3

  #25 opened 4 years ago by Moorviper
  2

• Wired network support on Pi 3B+?

  #33 opened 4 years ago by larskotthoff
  4

• [support] pandaPI V2.5 - Sensorless homing

  #31 opened 4 years ago by adepier
  3

• Compile STM32F103C8 firmware from source

  #12 opened 4 years ago by wmzart
  4

• [feature request][hardware] add jumper for display

  #20 opened 4 years ago by Moorviper
  2

• after update no connection from octoprint to Marlin possible

  #17 opened 4 years ago by Moorviper
  1

• More information on runout sensor

  #28 opened 4 years ago by dsancheznet
  2

• [feature-request] add fan mount to PCB

  #27 opened 4 years ago by Moorviper
  2

• Boot error with Raspberry Pi4 8G

  #26 opened 4 years ago by markniu
  1

• Stepper motor makes hissing noise

  #21 opened 4 years ago by chibisuke
  11

• Works with RPi 2 B+?

  #24 opened 4 years ago by santi19z
  1

• I been try to enable a dual z but i get this error at the time of compile the file.

  #23 opened 4 years ago by EMDM25
  43

• Creality CR-20: No LCD & Endstop does not stop movement

  #22 opened 4 years ago by sergiofenoll
  3

• suggestion: Differentiate 24v and non-24v fan sockets

  #15 opened 4 years ago by ChrisWeiss
  3

• Can not mount U drive on Pi3(wrong fs type, bad option, bad superblock)

  #19 opened 4 years ago by markniu
  0

• Can't Download pi3 file from mega

  #10 opened 5 years ago by Saboiatota
  2

• Question

  #18 opened 4 years ago by dgrammatiko
  2

• TMC2130 SPI?

  #16 opened 4 years ago by sl1pkn07
  1

• [info] Started to draw vector graphics for documentation.

  #13 opened 4 years ago by Moorviper
  4

• Closed Loop Motor Support.

  #14 opened 4 years ago by designerwebhosting
  2

• ramps 1.4 + panda pi

  #11 opened 5 years ago by lelibreauquotidien
  5

• pandapi 6 drivers schematic

  #4 opened 5 years ago by ememem13
  3

• printer halted. kill() called

  #9 opened 5 years ago by kine3000
  4

• PID autotune does not work

  #7 opened 5 years ago by LeonKnook
  11

• Linear Pressure Control v1.5

  #8 opened 5 years ago by LeonKnook
  1

• Error when clicking run

  #6 opened 5 years ago by Klinenator
  10

• Klipper

  #3 opened 5 years ago by Klinenator
  1

• M851 not available

  #2 opened 5 years ago by LeonKnook
  2

• Request for information (Thingiverse)

  #1 opened 5 years ago by AJMartel
  5