markusressel/fan2go

Issues

• maxPwmChangePerCycle buggy, keeps fan off

  #326 opened 2 months ago by jwefers
  8

• Incorrect file location in zsh autocompletion setup command on Manjaro

  #330 opened 3 months ago by tarlacac
  3

• Unable to set up my fans, fan2go.yaml settings seem to be ignored

  #324 opened 4 months ago by dinvlad
  10

• fan2go can not set fan speed

  #300 opened 8 months ago by recallmenot
  2

• Fan RPM doesn't follow linear steps fan curve

  #301 opened 4 months ago by dduits
  5

• Error reading PWM value of fan file_fan: file is empty

  #317 opened 4 months ago by ettom
  6

• fan2go-0.9.0 test failures

  #320 opened 4 months ago by stkw0
  4

• My fan curve is not detected properly (Min, Start, Max = 0)

  #316 opened 5 months ago by WildPenquin
  5

• Control loop logic does not really approach target values

  #266 opened a year ago by jwefers
  7

• wrong fan pwm map computed (maxPwm ignored)

  #311 opened 5 months ago by diggit
  10

• `getRpm` required when using `fan` `cmd`

  #310 opened 5 months ago by diggit
  2

• Fan stopped even neverStop is set to true

  #237 opened 2 years ago by sergeolkhovik
  3

• PWM values occasionally get reset to 0

  #298 opened 8 months ago by electricboy6
  2

• Provide an installation package.

  #262 opened a year ago by RokeJulianLockhart
  5

• Missing install steps

  #287 opened 10 months ago by d3vilguard
  1

• info provided by detect conflicts with readme

  #283 opened 10 months ago by ShalokShalom
  7

• wrong data with cmd fan

  #244 opened 10 months ago by piotr-sikora-v
  2

• Implement "channel" identification for sensors

  #286 opened 10 months ago by markusressel
  0

• Aquacomputer Octo can change platform name between reboots, device connections

  #273 opened a year ago by A-t-B-o
  3

• Add ability to generate a config

  #216 opened 2 years ago by zt64
  3

• Inappropriately using the bug tracker to figure out a configuration issue that I am having and not understanding how to fix it

  #265 opened a year ago by thyTwilightGoth
  8

• hwmon drivers with long update period lead to malfunction

  #272 opened a year ago by desowin
  3

• fan2go Linux ARM64 release is actually X86-64

  #269 opened a year ago by happyme531
  4

• fan2go reduces the noise too much

  #247 opened 2 years ago by onli
  1

• Fails to set PWM value automatically, even though it does this manually

  #264 opened a year ago by mks-h
  7

• Provide a GUI.

  #261 opened a year ago by RokeJulianLockhart
  4

• Unable to set fan mode/Dell XPS 7390/`dell_smm`/`pwm1_enable`

  #229 opened 2 years ago by piyueh
  5

• Skip PWM "dead-zones" by dropping minPwm + init function speedup.

  #260 opened a year ago by jhillest
  1

• Confusing error message. Need help setting up.

  #258 opened a year ago by jhillest
  3

• Only setting one of `index` or `rpmChannel` is not enough

  #230 opened a year ago by piyueh
  13

• I didn't see the channel column

  #245 opened a year ago by skill7899
  4

• Panic: Can't attach empty fan curve data to fan

  #211 opened a year ago by shtrophic
  4

• Unable to run as configured

  #231 opened a year ago by bluehysteric
  5

• curve input for linear

  #239 opened a year ago by haudiweg
  4

• Panic runing config validate

  #250 opened a year ago by edt-xx
  2

• Help needed with sensor values

  #246 opened 2 years ago by SteveSysadmin
  2

• How does the fan curve set the speed according to the temperature?

  #227 opened 2 years ago by bluehysteric
  6

• AMD RX 6800 GPU fan detection yields bad pwm values

  #196 opened 2 years ago by starsforeveryone
  9

• Fan initialization returning extremely low values on glitchy hardware

  #184 opened 2 years ago by Anonymous1157
  5

• Validation failed: Fan cpu: invalid index, must be >= 1

  #224 opened 2 years ago by sergeolkhovik
  3

• High idle power draw / Increase in wakeup calls per second

  #198 opened 2 years ago by starsforeveryone
  5

• Consider relicense (AGPL is problematic)

  #220 opened 2 years ago by jfroy
  2

• fan2go incorrectly enumerates fan controllers that do not start at pwm1

  #187 opened 2 years ago by Neo-Desktop
  1

• Dell Server - Cycles without Settling

  #201 opened 2 years ago by tjbennett
  4

• Curve functions: sum, difference

  #192 opened 2 years ago by starsforeveryone
  4

• Include possible values in help

  #182 opened 2 years ago by markusressel
  0

• "fan2go detect" does not distinguish between two different sensors it8628-isa-0a40 and it8628-isa-0a60

  #188 opened 2 years ago by adb76
  2

• aur package is broken

  #183 opened 2 years ago by roshal
  5

• Controlling a water pump

  #172 opened 2 years ago by ThisIsTheOnlyUsernameAvailable
  3

• Config validation passes, then "curve list" spits out errors

  #176 opened 2 years ago by zopieux
  2