markwal/OctoPrint-GPX

Issues

• Still cant connect to Creator Pro

  #100 opened 7 months ago by agilewebsolutions
  1

• Errorno 5 can't connect to replicator mini+

  #99 opened 9 months ago by wBrhy2
  3

• MakerBot Replicator - 5th Gen

  #97 opened a year ago by beadon
  3

• Steps per mm "Y-axis" no change

  #55 opened 7 years ago by JKJameson
  4

• octoprint/GPX loses connection with a buffer overflow

  #68 opened 6 years ago by adcurtin
  1

• Never stops cancelling

  #88 opened 4 years ago by DaAwesomeP
  11

• Issue installing plugin on v1.8.6

  #96 opened 2 years ago by eternalevelyn
  0

• OSError: Generic Packet error on gpx.write(data)

  #95 opened 2 years ago by guysoft
  0

• Issue installing GPX plugin on Octoprint 1.8.1

  #94 opened 3 years ago by Pmullins1
  1

• Unexpected error while writing to serial port: OSError: '[Errno 5]

  #93 opened 3 years ago by DonaldRiesel
  0

• OctoPrint-GPX for macOS

  #73 opened 5 years ago by michaelbaisch
  4

• Cannot Install GPX plugin in OctoPtint 1.7.2

  #91 opened 3 years ago by RayLSmith
  0

• Steps per mm no change to extruder calibration

  #72 opened 6 years ago by Snave3d
  1

• Very strange motor mappings with FlashForge Creator Pro

  #90 opened 4 years ago by AdamuKaapan
  0

• Machine Definition settings don't take effect until next connection

  #89 opened 4 years ago by thebeline
  3

• fan stops in last layer

  #67 opened 6 years ago by biggoldensun
  4

• Unable to read EEPROM

  #74 opened 5 years ago by michaelbaisch
  21

• Cannot connect

  #84 opened 5 years ago by boogiemann
  1

• how do you install an old version?

  #59 opened 4 years ago by mark-hahn
  3

• Odd issues with heated bed

  #58 opened 4 years ago by paukstelis
  5

• Cancelling a Print causes hang up

  #77 opened 4 years ago by leitenky
  19

• Can't install GPX plugin

  #86 opened 4 years ago by biggerdummy
  9

• afterPrintCancelled Script not running on Creator Pro

  #87 opened 5 years ago by HakuG
  1

• OctoPrint 1.4.1 - Can Not Install Plugin -> Edit: Workaround Found. Resolution Scheduled with OctoPrint 1.5.0

  #85 opened 5 years ago by sirhakon
  9

• FFCP Temperature Drop after last Update

  #81 opened 5 years ago by prodestrian
  4

• Nozzle Diameter

  #83 opened 5 years ago by leitenky
  2

• UnicodeDecodeError

  #76 opened 5 years ago by sh7777
  18

• GPX Plugin: 2.6.3 update to 2.6.5 wrong download location?

  #78 opened 5 years ago by wolfbiteaus
  1

• Cannot connect to Flash Forge Creator since last update

  #80 opened 5 years ago by BenBtg
  2

• can you add creator 3 and Guider 2

  #79 opened 5 years ago by goldjunge91
  2

• Makerbot G code Beep commands

  #82 opened 5 years ago by InertiaImpact
  2

• Haven't been able to print x3g files for ages ...

  #61 opened 5 years ago by jrpmedia
  9

• Flashforge Creator Pro will not successfully print with both extruders

  #75 opened 5 years ago by gadg3ts
  3

• GPX doesn't show up in OctoPrint plugin repo, and cannot install via URL

  #71 opened 5 years ago by andyman1222
  6

• Resource Busy Error with Replicator 1

  #64 opened 5 years ago by jmwright
  2

• Replicator 2 Prints Mid Air

  #70 opened 5 years ago by 400HPMustang
  2

• FFCP

  #65 opened 5 years ago by icancwhatusay
  1

• printer not reacting

  #69 opened 6 years ago by ccoolshooo
  0

• Z moves down when I start the print

  #60 opened 6 years ago by brotherchris
  0

• Possible Octoprint 1.3.7 Incompatibility - FFCP

  #56 opened 7 years ago by BryanSmithDev
  7

• gpx.ini gets set to all "None" values

  #66 opened 6 years ago by jamagin
  1

• Bed control always off

  #51 opened 7 years ago by GyulaMasa
  13

• delete

  #62 opened 7 years ago by jrpmedia
  0

• Request: enable/disable GPX with profile

  #57 opened 7 years ago by ghvader
  1

• Plugin GPX not saving settings

  #54 opened 7 years ago by edacraneo
  8

• Octoprint-GPX not remembering setting, thus not printing correctly

  #50 opened 8 years ago by Nico19951995
  2

• Makerbot Rep2 gcode not on build plate

  #53 opened 7 years ago by igranderojo
  1

• Plugin Install Error

  #52 opened 7 years ago by igranderojo
  1

• Can't install from Octoprint

  #48 opened 7 years ago by laurentRueil
  2

• Print progress bar completes in matter of minutes for 5 hour print while printer doesn't even move.

  #49 opened 8 years ago by Burritobun
  1