BLE FIDO Authenticator

(Up to now only BLE interface, no functionality)

Integrates the solokey/solo project for handling the CTAP stuff.

Creates GATT server and then starts advertising, waiting to be connected to a GATT client.

It uses ESP32's Bluetooth controller and NimBLE stack based BLE host.

SMP parameters like I/O capabilities of device, Bonding flag, MITM protection flag and Secure Connection only mode etc., can be configured through menuconfig options.

To test this, any BLE scanner app can be used.

Configure the project

idf.py menuconfig

Set serial port under Serial Flasher Options.
Select I/O capabilities of device from 'Example Configuration > I/O Capability', default is 'Just_works'.
Enable/Disable other security related parameters 'Bonding, MITM option, secure connection(SM SC)' from 'Example Configuration'.

Build and Flash

Clone this repository using:

git clone --recurse-submodules https://github.com/martin-ger/ESP32Auth.git

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Note

NVS support is not yet integrated to bonding. So, for now, bonding is not persistent across reboot.