/puppet-icinga2

GIT Mirror & Releases for Icinga 2 Puppet Module

Primary LanguagePuppetGNU General Public License v2.0GPL-2.0

Icinga 2 Puppet module

Fair warning

The GIT branch develop of this module is in a bit of flux at the moment.

Please make sure to check:

TODO: remove for release!

Table of Contents

  1. Overview - What is the Icinga 2 module?
  2. Module Description - What does the module do?
  3. Setup - The basics of getting started with the Icinga 2 module
  4. Usage - How to use the module for various tasks
  5. Reference - The classes and defined types available in this module
  6. Limitations - OS compatibility, etc.
  7. Development - Guide for contributing to the module
  8. Contributors - List of module contributors

Overview

This module installs and configures the Icinga 2 monitoring system. It can also install and configure NRPE on client systems that are being monitored by an Icinga 2 server.

Module Description

Coming soon...

Setup

This module should be used with Puppet 3.6 or later. It may work with earlier versions of Puppet 3 but it has not been tested.

This module requires Facter 2.2 or later, specifically because it uses the operatingsystemmajrelease fact.

This module requires the Puppet Labs stdlib module.

For Ubuntu systems, this module requires the Puppet Labs apt module.

On EL-based systems (CentOS, Red Hat Enterprise Linux, Fedora, etc.), the EPEL package repository is required. You can also use the icinga2::nrpe class to set up NRPE on CentOS 5. It is discouraged to set up Icinga2 Server on this old of a distribution. You are encouraged to use at least CentOS 6 or higher.

####Note for RedHat

If you are using RedHat Satellite server, set

   $manage_repos = false

in icinga2::server class and make sure, you have a channel set up with the contents of the icinga2 repository and the needed packages from EPEL. If you leave it at true, the EPEL repository will be used directly.

If you would like to use the icinga2::object defined types as exported resources, you'll need to have your Puppet master set up with PuppetDB. See the Puppet Labs documentation for more info: Docs: PuppetDB

###Server requirements

Icinga 2 requires either a MySQL or a Postgres database.

Currently, this module does not set up any databases. You'll have to create one before installing Icinga 2 via the module.

If you would like to set up your own database, either of the Puppet Labs MySQL or Postgres modules can be used.

The example below shows the Puppet Labs Postgres module being used to install Postgres and create a database and database user for Icinga 2:

  class { 'postgresql::server': }

  postgresql::server::db { 'icinga2_data':
    user     => 'icinga2',
    password => postgresql_password('icinga2', 'password'),
  }

For production use, you'll probably want to get the database password via a Hiera lookup so the password isn't sitting in your site manifests in plain text.

####Note For CentOS 5 You must be running CentOS 5.11 and no later in order to satisfy dependencies.

If you are attempting to install Icinga2 server on CentOS 5 (discouraged) and would like to use PostgreSQL, you must provide a non-EOL'd version of it. If you are installing PostgreSQL for the first time, you can tell the module to manage the pgsql YUM repository like so:

  class { 'postgresql::globals':
    manage_package_repo => true,
    version             => '9.3',
  }->
  class { 'postgresql::server': }

CentOS 5 provides PostgreSQL 9.1 by default, which was end-of-life'd in 2010. Without having the module manage the repo, it will gladly install this crippled version for you which isn't what you want.

You will still need to declare a database for Icinga2 to access.

Usage

###General Usage

####icinga2::conf

This defined type creates custom files in the /etc/icinga2/conf.d directory.

The icinga2::conf type has target_dir, target_file_name, target_file_owner, target_file_group and target_file_mode parameters just like the icinga2::object types.

The content of the file can be managed with two parameters:

  • template is an ERB tmplate to use for the content (ie. site/icinga2/baseservices.conf.erb)
  • source is the file server source URL for a static file (ie. puppet:///modules/site/icinga2/baseservices.conf)

To dynamically manage the variables of your template, use the options_hash parameter. It can be given a hash of data that is accessible in the template.

Example usage:

icinga2::conf { 'baseservices':
  template     => 'site/icinga2/baseservices.conf.erb',
  options_hash => {
    enable_notifications => true,
    check_interval       => '5',
    groups               => [ 'all-servers' , 'linux-servers' ],
  }
}

###Server usage

To install Icinga 2, first set up a MySQL or Postgres database.

Once the database is set up, use the icinga2::server class with the db_ database connection parameters:

#Install Icinga 2:
class { 'icinga2::server':
  server_db_type => 'pgsql',
  db_host => 'localhost',
  db_port => '5432',
  db_name => 'icinga2_data',
  db_user => 'icinga2',
  db_password => 'password',
}

When the server_db_type parameter is set, the right IDO database connection packages are automatically installed and the database schema is loaded.

Note: For production use, you'll probably want to get the database password via a Hiera lookup so the password isn't sitting in your site manifests in plain text:

#Install Icinga 2:
class { 'icinga2::server':
  server_db_type => 'pgsql',
  db_host => 'localhost',
  db_port => '5432',
  db_name => 'icinga2_data',
  db_user => 'icinga2',
  db_password => hiera('icinga_db_password_key_here'),
}

You'll also need to add an IDO connection object that has the same database settings and credentials as what you entered for your icinga2::server class.

You can do this by applying either the icinga2::object::idomysqlconnection or icinga2::object::idopgsqlconnection class to your Icinga 2 server, depending on which database you're using.

An example icinga2::object::idopgsqlconnection class is below:

icinga2::object::idopgsqlconnection { 'postgres_connection':
   target_dir => '/etc/icinga2/features-enabled',
   target_file_name => 'ido-pgsql.conf',
   host             => '127.0.0.1',
   port             => 5432,
   user             => 'icinga2',
   password         => 'password',
   database         => 'icinga2_data',
   categories => ['DbCatConfig', 'DbCatState', 'DbCatAcknowledgement', 'DbCatComment', 'DbCatDowntime', 'DbCatEventHandler' ],
}

In a future version, the module will automatically create the IDO connection objects.

Using the Debmon repository on Debian systems

If you would like to use the Debmon repository for Debian 7 systems, set use_debmon_repo to true when you call the icinga2::server class:

class { 'icinga2::server':
  server_db_type => 'pgsql',
  # default to false
  use_debmon_repo => true,
  db_host => 'localhost'
  db_port => '5432'
  db_name => 'icinga2_data'
  db_user => 'icinga2'
  db_password => 'password',
}

NRPE and Nagios plugin packages

If you will be installing NRPE or the Nagios plugins packages with the icinga2::nrpe class on a node that also has the icinga2::server class applied, be sure to set the $server_install_nagios_plugins parameter in your call to icinga2::server to false:

#Install Icinga 2:
class { 'icinga2::server':
  ...
  server_install_nagios_plugins => false,
  ...
 }

This will stop the icinga2::server class from trying to install the plugins packages and will prevent a duplicate resource error, since the icinga2::nrpe class will already be installing the plugin packages.

mail binaries

If you would like to install packages to make a mail command binary available so that Icinga 2 can send out email notifications, set the install_mail_utils_package parameter to true:

  class { 'icinga2::server':
    ...
    install_mail_utils_package => true,
    ...
  }

Enabling and disabling Icinga 2 features

To manage the features that are enabled or disabled on an Icinga 2 server, you can specify them with the server_enabled_features and server_disabled_features parameters.

The parameters should be given as arrays of single-quoted strings.

Note: Even if you're only specifying one feature, you will still need to specify it as an array.

Note: If a feature is listed in both the server_enabled_features and server_disabled_features arrays, the feature will be disabled.

class { 'icinga2::server':
  ...
  server_enabled_features  => ['checker','notification'],
  server_disabled_features => ['graphite','livestatus'],
}

###NRPE usage

To install NRPE and allow the local machine and Icinga 2 servers (or Icinga 1 or plain old Nagios servers) with various IP addresess to connect:

class { 'icinga2::nrpe':
  nrpe_allowed_hosts => ['10.0.1.79', '10.0.1.80', '10.0.1.85', '127.0.0.1'],
}

By default the NRPE daemon will not allow clients to specify arguments to the commands that are executed. To enable NRPE to allow client argument processing you can call the icinga2::nrpe class with the allow_command_argument_processing parameter.

Valid parameter values are: 0=do not allow arguments, 1=allow command arguments

WARNING! - ENABLING THIS OPTION IS A SECURITY RISK!

class { 'icinga2::nrpe':
  allow_command_argument_processing => 1,
}

If you'd like to purge NRPE config files that are not managed by Puppet you can set $nrpe_purge_unmanaged to true.

class { 'icinga2::nrpe':
  nrpe_purge_unmanaged => true,
}

Note: If you would like to install NRPE on a node that also has the icinga2::server class applied, be sure to set the $server_install_nagios_plugins parameter in your call to icinga2::server to false:

#Install Icinga 2:
class { 'icinga2::server':
  server_db_type => 'pgsql',
  server_install_nagios_plugins => false,
 }

This will stop the icinga2::server class from trying to install the plugins pacakges, since the icinga2::nrpe class will already be installing them and will prevent a resulting duplicate resource error.

Check Plugins

Agents installed on nodes (such as NRPE) that Icinga is performing active checks against often require additional or custom check plugins. In order to deploy these check pluings on a node you can call the checkplugin defined resource.

The checkplugin defined resource can distribute files via both content (templates) and source (files). By default the checkpluin resource will assume your distribution method is content (template) and that your template resides in the icinga2 module

To reference a template that resides in another module you can update the $checkplugin_template_module parameter with the module your template resides

$checkplugin_template_module => 'SomeModule',

Example 1: Distribute check plugin that is a template

icinga2::checkplugin { 'check_diskstats':
  checkplugin_template => 'checkplugins/check_diskstats.erb',
}

Example 2: Distribute check plugin that is a static file

icinga2::checkplugin { 'check_diskstats':
  checkplugin_file_distribution_method => 'source',
  checkplugin_source_file              => 'puppet:///modules/checkplugins/check_diskstats',
}

Example 3: Distribute check plugin in a manifest

icinga2::checkplugin { 'check_diskstats':
  checkplugin_file_distribution_method => 'inline',
  checkplugin_source_inline            => 'command[check_disks]=/usr/lib64/nagios/plugins/check_disk -w 20 -c 10 -p /',
}

Example 4: Distribute check plugin stored in Hiera(-yaml)

---
icinga2::checkplugin:
  check_diskstats:
    checkplugin_file_distribution_method: 'inline'
    checkplugin_source_inline:            'command[check_disks]=/usr/lib64/nagios/plugins/check_disk -w 20 -c 10 -p /'

###Object type usage

This module includes several defined types that can be used to automatically generate Icinga 2 format object definitions. They function in a similar way to the built-in Nagios types that are included in Puppet.

####Default object file locations, owner, group and mode

The default file location for each object type is controlled by the target_file_dir parameter. For each object type, it defaults to a subdirectory under /etc/icinga2/objects.

The default locations are under /etc/icinga2/objects and not /etc/icinga2/conf.d/ so that user-defined objects can be kept completely separate from the objects included with Icinga 2. However, you can change the target_file_dir parameter to /etc/icinga2/conf.d if needed.

The default file owner and group are controlled by the target_file_owner and target_file_group parameters. Both default to root.

The default file mode is controlled by the target_file_mode parameter. It defaults to 0644.

####Purging unmanaged object files

The purge_unmanaged_object_files parameter of the icinga2::server class controls whether object files in /etc/icinga2/objects that are not managed by Puppet get purged. It defaults to false.

Note: This will purge unmanaged subdirectories as well as unmanaged files!

####Exported resources

Like the built-in Nagios types, the Icinga 2 objects in this module can be exported to PuppetDB as virtual resources and collected on your Icinga 2 server.

Nodes that are being monitored can have the @@ virtual resources applied to them:

@@icinga2::object::host { $::fqdn:
  display_name => $::fqdn,
  ipv4_address => $::ipaddress_eth0,
  groups => ['linux_servers', 'mysql_servers'],
  vars => {
    os              => 'linux',
    virtual_machine => 'true',
    distro          => $::operatingsystem,
  },
  target_dir => '/etc/icinga2/objects/hosts',
  target_file_name => "${fqdn}.conf"
}

Then, on your Icinga 2 server, you can collect the exported virtual resources (notice the camel casing in the class name):

#Collect all @@icinga2::object::host resources from PuppetDB that were exported by other machines:
Icinga2::Object::Host <<| |>> { }

Unlike the built-in Nagios types, the file ensure status, owner, group and mode of the automatically generated files can be controlled via the target_file_ensure target_file_owner, target_file_group and target_file_mode parameters:

@@icinga2::object::host { $::fqdn:
  display_name => $::fqdn,
  ipv4_address => $::ipaddress_eth0,
  groups => ['linux_servers', 'mysql_servers'],
  vars => {
    os               => 'linux',
    virtual_machine  => 'true',
    distro           => $::operatingsystem,
  },
  target_dir         => '/etc/icinga2/objects/hosts',
  target_file_name   => "${fqdn}.conf"
  target_file_ensure =>
  target_file_owner  => 'root',
  target_file_group  => 'root',
  target_file_mode   => '0644'
}

####undef and default object values

Most of the object parameters in the Puppet module are set to undef.

This means that they will not be added to the rendered object definition files.

However, this doesn't mean that the values are undefined in Icinga 2. Icinga 2 itself has built-in default values for many object parameters and falls back to them if one isn't present in an object definition. See the docs for individual object types in Configuring Icinga 2 for more info about which object parameters have what default values.

####Notifying the Icinga 2 service

By default, each object defined type will automatically notify and restart the Icinga 2 service. However, if you're using the module to just generate object files and not using it to manage the service, you'll likely get compilation errors about the icinga2 service not being in the catalog.

Each object defined type has a boolean parameter, refresh_icinga2_service, that controls whether the object file will notify the service. To not notify the service, set it to false:

icinga2::object::apply_dependency { 'usermail_dep_on_icinga2mail':
  parent_host_name => 'icinga2mail.local',
  target_file_owner => vagrant,
  assign_where => 'match("^usermail*", host.name)',
  refresh_icinga2_service => false,
}

####Features

TODO: describe init.pp params TODO: checker

Please see the Icinga 2 Documentation for details on the attributes.

#####icinga2::feature::mainlog

This feature is enabled by default and defines where to write the main log file of Icinga2.

You can change the location and severity.

class { 'icinga2::feature::mainlog':
  severity => 'debug',
  path     => '/data/icinga2/icinga2.log',
}

#####icinga2::feature::notification

This feature is enabled by default and enabled notification features in Icinga2.

You can change the enable_ha feature

class { 'icinga2::feature::mainlog':
  enable_ha => false,
}

####Objects

Object types:

####icinga2::object::apilistener

The apilistener defined type can create ApiLister objects that set the bind address and port for Icinga 2's API listener, as well as the locations of the machine's Icinga 2 cert, key and Icinga 2 CA key:

#Create an API listener object:
icinga2::object::apilistener { 'master-api':
  bind_host => $ipaddress_eth1,
  accept_commands => true,
}

The accept_config and accept_commands parameters default to false.

See the Icinga 2 documention for more info: http://docs.icinga.org/icinga2/latest/doc/module/icinga2/chapter/configuring-icinga2#objecttype-apilistener

####icinga2::object::apply_service

The apply_service defined type can create apply objects to apply services to hosts:

#Create an apply that checks the number of zombie processes:
icinga2::object::apply_service { 'check_zombie_procs':
  display_name => 'Zombie procs',
  check_command => 'nrpe',
  vars => {
    nrpe_command => 'check_zombie_procs',
  },
  assign_where => '"linux_servers" in host.groups',
  ignore_where => 'host.name == "localhost"',
  target_dir => '/etc/icinga2/objects/applys'
}

This defined type has the same available parameters that the icinga2::object::service defined type does except the apply parameter.

The apply allows multiple services with one definition based on host variables. See http://docs.icinga.org/icinga2/latest/doc/module/icinga2/chapter/monitoring-basics#using-apply-for-custom-attribute-override for more information.

apply => 'for (interface_name => interface_config in host.vars.interfaces)';

The assign_where and ignore_where parameter values are meant to be provided as strings. Since Icinga 2 requires that string literals be double-quoted, the whole string in your Puppet site manifests will have to be single-quoted (leaving the double quotes intact inside):

assign_where => '"linux_servers" in host.groups',

If you would like to use Puppet or Facter variables in an assign_where or ignore_where parameter's value, you'll first need to double-quote the whole value for Puppet's variable interpolation to work. Then, you'll need to escape the double quotes that surround the Icinga 2 string literals inside:

assign_where => "\"linux_servers\" in host.${facter_variable}"",

####icinga2::object::applynotificationtohost

The apply_notification_to_host defined type can create apply objects to apply notifications to hosts:

This defined type has the same available attributes that the icinga2::object::notification defined type does. With the addition of assign_where and ignore_where

#Create an apply that will send notifications to PagerDuty
icinga2::object::apply_notification_to_host { 'pagerduty-host':
  assign_where => 'host.vars.enable_pagerduty == "true"',
  command      => 'notify-host-by-pagerduty',
  users        => [ 'pagerduty' ],
  states       => [ 'Up', 'Down' ],
  types        => [ 'Problem', 'Acknowledgement', 'Recovery', 'Custom' ],
  period       => '24x7',
}

####icinga2::object::applynotificationtoservice

The apply_notification_to_service defined type can create apply objects to apply notifications to service:

This defined type has the same available attributes that the icinga2::object::notification defined type does. With the addition of assign_where and ignore_where

icinga2::object::apply_notification_to_service { 'pagerduty-service':
  assign_where => 'service.vars.enable_pagerduty == "true"',
  command      => 'notify-service-by-pagerduty',
  users        => [ 'pagerduty' ],
  states       => [ 'OK', 'Warning', 'Critical', 'Unknown' ],
  types        => [ 'Problem', 'Acknowledgement', 'Recovery', 'Custom' ],
  period       => '24x7',
}

####icinga2::object::checkcommand

The checkcommand defined type can create checkcommand objects.

Example:

#Create an HTTP check command:
icinga2::object::checkcommand { 'check_http':
  command => ['"/check_http"'],
  arguments     => {
    '"-H"'          => '"$http_vhost$"',
    '"-I"'          => '"$http_address$"',
    '"-u"'          => '"$http_uri$"',
    '"-p"'          => '"$http_port$"',
    '"-S"'          => {
      'set_if' => '"$http_ssl$"'
    },
    '"--sni"'       => {
      'set_if' => '"$http_sni$"'
    },
    '"-a"'          => {
      'value'       => '"$http_auth_pair$"',
      'description' => '"Username:password on sites with basic authentication"'
    },
    '"--no-body"'   => {
      'set_if' => '"$http_ignore_body$"'
    },
    '"-r"' => '"$http_expect_body_regex$"',
    '"-w"' => '"$http_warn_time$"',
    '"-c"' => '"$http_critical_time$"',
    '"-e"' => '"$http_expect$"'
  },
  vars => {
    'vars.http_address' => '"$address$"',
    'vars.http_ssl'     => 'false',
    'vars.http_sni'     => 'false'
  }
}

Available parameters are:

  • template_to_import
  • command
  • cmd_path
  • arguments
  • env
  • vars
  • timeout
  • target_dir
  • target_file_name
  • target_file_owner
  • target_file_group
  • target_file_mode

####icinga2::object::compatlogger

The compatlogger defined type can create compatlogger objects.

icinga2::object::compatlogger { 'daily-log':
  log_dir         => '/var/log/icinga2/compat',
  rotation_method => 'DAILY'
}

Both patameters as optionals. The parameter rotation_method can one of HOURLY, DAILY, WEEKLY or MONTHY. See CompatLogger on docs.icinga.org for a full list of parameters.

####icinga2::object::checkresultreader

The checkresultreader defined type can create checkresultreader objects.

Example:

icinga2::object::checkresultreader {'reader':
  spool_dir => '/data/check-results'
}

See CheckResultReader on docs.icinga.org for a full list of parameters.

####icinga2::object::endpoint

The endpoint defined type can create endpoint objects.

icinga2::object::endpoint { 'icinga2b':
  host => '192.168.5.46',
  port => 5665
}

See EndPoint on docs.icinga.org for a full list of parameters.

####icinga2::object::eventcommand

The eventcommand defined type can create eventcommand objects.

#Create the http restart command:
icinga2::object::eventcommand { 'restart-httpd-event':
  command => [ '"/opt/bin/restart-httpd.sh"' ]
}

This object use the same parameter defined to checkcommand.

####icinga2::object::externalcommandlistener

The externalcommandlistener defined type can create ExternalCommandListener objects.

icinga2::object::externalcommandlistener { 'external':
  command_path => '/var/run/icinga2/cmd/icinga2.cmd'
}

See ExternalCommandListener on docs.icinga.org for a full list of parameters.

####icinga2::object::host

This defined type creates host objects.

Example:

@@icinga2::object::host { $::fqdn:
  display_name => $::fqdn,
  ipv4_address => $::ipaddress_eth1,
  groups => ["linux_servers", 'mysql_servers', 'postgres_servers', 'clients', 'smtp_servers', 'ssh_servers', 'http_servers', 'imap_servers'],
  vars => {
    os              => 'linux',
    virtual_machine => 'true',
    distro          => $::operatingsystem,
  },
  target_dir => '/etc/icinga2/objects/hosts',
  target_file_name => "${fqdn}.conf"
}

Notes on specific parameters:

  • groups: must be specified as a Puppet array, even if there's only one element
  • vars: must be specified as a Puppet hash, with the Icinga 2 variable as the key and the variable's value as the value

Note: The ipv6_address parameter is set to undef by default. This is because facter can return either IPv4 or IPv6 addresses for the ipaddress_ethX facts. The default value for the ipv6_address parameter is set to undef and not ipaddress_eth0 so that an IPv4 address isn't unintentionally set as the value for address6 in the rendered host object definition.

If you would like to use an IPv6 address, make sure to set the ipv6_address parameter to the ipaddress_ethX fact that will give you the right IPv6 address for the machine:

@@icinga2::object::host { $::fqdn:
  display_name => $::fqdn,
  ipv6_address => $::ipaddress_eth1,
....
}

####icinga2::object::hostgroup

Coming soon...

####icinga2::object::icingastatuswriter

This defined type creates an IcingaStatusWriter objects.

Example usage:

icinga2::object::icingastatuswriter { 'status':
   status_path       => '/cache/icinga2/status.json',
   update_interval   => '15s',
}

See IcingaStatusWriter on docs.icinga.org for more details about the object.

####icinga2::object::idomysqlconnection

This defined type creates an IdoMySqlConnection objects.

Though you can create the file anywhere and with any name via the target_dir and target_file_name parameters, you should set the target_dir parameter to /etc/icinga2/features-enabled, as that's where Icinga 2 will look for DB connection objects by default.

Example usage:

icinga2::object::idomysqlconnection { 'mysql_connection':
   target_dir       => '/etc/icinga2/features-enabled',
   target_file_name => 'ido-mysql.conf',
   host             => '127.0.0.1',
   port             => 3306,
   user             => 'icinga2',
   password         => 'password',
   database         => 'icinga2_data',
   categories       => ['DbCatConfig', 'DbCatState', 'DbCatAcknowledgement', 'DbCatComment', 'DbCatDowntime', 'DbCatEventHandler' ],
}

Some parameters require specific data types to be given:

All other parameters are given as single-quoted strings.

This defined type supports all of the parameters that IdoMySqlConnection objects have available.

See IdoMySqlConnection on docs.icinga.org for a full list of parameters.

####icinga2::object::idopgsqlconnection

This defined type creates an IdoPgSqlConnection objects.

Though you can create the file anywhere and with any name via the target_dir and target_file_name parameters, you should set the target_dir parameter to /etc/icinga2/features-enabled, as that's where Icinga 2 will look for DB connection objects by default.

Example usage:

icinga2::object::idopgsqlconnection { 'postgres_connection':
   target_dir => '/etc/icinga2/features-enabled',
   target_file_name => 'ido-pgsql.conf',
   host             => '127.0.0.1',
   port             => 5432,
   user             => 'icinga2',
   password         => 'password',
   database         => 'icinga2_data',

   categories => ['DbCatConfig', 'DbCatState', 'DbCatAcknowledgement', 'DbCatComment', 'DbCatDowntime', 'DbCatEventHandler' ],
}

Some parameters require specific data types to be given:

All other parameters are given as single-quoted strings.

This defined type supports all of the parameters that IdoMySqlConnection objects have available.

See IdoPgSqlConnection on docs.icinga.org for a full list of parameters.

####icinga2::object::livestatuslistener

This defined type creates a LivestatusListener objects.

Example usage:

icinga2::object::livestatuslistener { 'livestatus-unix':
  socket_type => 'unix',
  socket_path => '/var/run/icinga2/cmd/livestatus'
}

See LivestatusListener on docs.icinga.org for a full list of parameters.

####icinga2::object::notification

The notification defined type can create notification objects.

#Defining Create the mail notification command:
icinga2::object::notification { 'localhost-ping-notification':
  host_name    => 'localhost',
  service_name => 'ping4',
  command      => 'mail-service-notification',
  types        => [ 'Problem', 'Recovery' ]
}

Available parameters are:

  • host_name: Required.
  • service_name: Optional.
  • vars: Optional.
  • users: Optional.
  • user_groups: Optional.
  • times: Optional.
  • command: Required.
  • interval: Optional.
  • period: Optional.
  • types: Optional.
  • states: Optional.
  • target_file_name: Optional.
  • target_file_owner: Optional.
  • target_file_group: Optional.
  • target_file_mode: Optional.

Notes on specific parameters:

  • vars: needs to be a hash
  • users,user_groups,types,states: should be an array, see Notification for list of valid state and type filters
  • times: needs to be a hash with begin and end attributes
  • interval: needs to be a number, not a quoted string

####icinga2::object::notificationcommand

The notificationcommand defined type can create notificationcommand objects.

#Create the mail notification command:
icinga2::object::notificationcommand { 'mail-service-notification':
  command   => ['"/icinga2/scripts/mail-notification.sh"'],
  cmd_path  => 'SysconfDir',
  env       => {
    'NOTIFICATIONTYPE'  => '"$notification.type$"',
    'SERVICEDESC' => '"$service.name$"',
    'HOSTALIAS' => '"$host.display_name$"',
    'HOSTADDRESS' => '"$address$"',
    'SERVICESTATE' => '"$service.state$"',
    'LONGDATETIME' => '"$icinga.long_date_time$"',
    'SERVICEOUTPUT' => '"$service.output$"',
    'NOTIFICATIONAUTHORNAME' => '"$notification.author$"',
    'NOTIFICATIONCOMMENT' => '"$notification.comment$"',
    'HOSTDISPLAYNAME' => '"$host.display_name$"',
    'SERVICEDISPLAYNAME' => '"$service.display_name$"',
    'USEREMAIL' => '"$user.email$"'
  }
}

This object use the same parameter defined to checkcommand.

####icinga2::object::perfdatawriter

This defined type creates a PerfdataWriter object Example usage:

icinga2::object::perfdatawriter { 'pnp':
  host_perfdata_path      => '/var/spool/icinga2/perfdata/host-perfdata',
  service_perfdata_path   => '/var/spool/icinga2/perfdata/service-perfdata',
  host_format_template    => 'DATATYPE::HOSTPERFDATA\tTIMET::$icinga.timet$\tHOSTNAME::$host.name$\tHOSTPERFDATA::$host.perfdata$\tHOSTCHECKCOMMAND::$host.check_command$\tHOSTSTATE::$host.state$\tHOSTSTATETYPE::$host.state_type$',
  service_format_template => 'DATATYPE::SERVICEPERFDATA\tTIMET::$icinga.timet$\tHOSTNAME::$host.name$\tSERVICEDESC::$service.name$\tSERVICEPERFDATA::$service.perfdata$\tSERVICECHECKCOMMAND::$service.check_command$\tHOSTSTATE::$host.state$\tHOSTSTATETYPE::$host.state_type$\tSERVICESTATE::$service.state$\tSERVICESTATETYPE::$service.state_type$',
  rotation_interval       => '15s'
}

See PerfdataWriter on docs.icinga.org for a full list of parameters.

####icinga2::object::scheduleddowntime

This defined type creates ScheduledDowntime objects

icinga2::object::scheduleddowntime {'some-downtime':
  host_name    => 'localhost',
  service_name => 'ping4',
  author       => 'icingaadmin',
  comment      => 'Some comment',
  fixed        => false,
  duration     => '30m',
  ranges       => { 'sunday' => '02:00-03:00' }
}

####icinga2::object::service

Coming soon...

####icinga2::object::servicegroup

This defined type creates an ServiceGroup objects.

Example usage:

icinga2::object::servicegroup { 'web_services':
  display_name => 'web services',
  target_dir => '/etc/icinga2/objects/servicegroups',
}

See ServiceGroup on docs.icinga.org for a full list of parameters.

####icinga2::object::statusdatawriter

This defined type creates StatusDataWriter objects.

Example usage:

icinga2::object::statusdatawriter { 'status':
    status_path     => '/var/cache/icinga2/status.dat',
    objects_path    => '/var/cache/icinga2/objects.path',
    update_interval => 30s
}

See StatusDataWriter on docs.icinga.org for more info.

####icinga2::object::sysloglogger

This defined type creates SyslogLogger objects.

severity can be set to debug, notice, information, warning or critical.

Example usage:

icinga2::object::sysloglogger { 'syslog-warning':
  severity => 'warning',
  target_dir => '/etc/icinga2/features-enabled',
}

See SyslogLogger on docs.icinga.org for more info.

####icinga2::object::user

Coming soon...

####icinga2::object::usergroup

You can use this defined type to create user groups. Example:

#Create an admins user group:
icinga2::object::hostgroup { 'admins':
  display_name => 'admins',
  target_dir => '/etc/icinga2/objects/usergroups',
}

####icinga2::object::timeperiod

This defined type creates TimePeriod objects

Example usage:

icinga2::object::timeperiod { 'bra-office-hrs':
  timeperiod_display_name => 'Brazilian WorkTime Hours',
  ranges       => {
    'monday'    => '12:00-21:00',
    'tuesday'   => '12:00-21:00',
    'wednesday' => '12:00-21:00',
    'thursday'  => '12:00-21:00',
    'friday'    => '12:00-21:00'
  }
}

See TimePeriod on docs.icinga.org for more info.

####icinga2::object::graphitewriter

This defined type creates an GraphiteWriter object

Though you can create the file anywhere and with any name via the target_dir and target_file_name parameters, you should set the target_dir parameter to /etc/icinga2/features-enabled, as that's where Icinga 2 will look for graphitewriter connection objects by default.

Example Usage:

icinga2::object::graphitewriter { 'graphite_relay':
  target_dir       => '/etc/icinga2/features-enabled',
  target_file_name => 'graphite.conf',
  graphite_host    => '127.0.0.1',
  graphite_port    => 2003,
}

####icinga2::object::zone

This defined type creates a Zone object

Example Usage to create an HA master zone:

icinga2::object::zone { 'master':
    endpoints => ['icinga-master1', 'icinga-master2'],
}

Example Usage to create a satellite zone and specify a parent:

icinga2::object::zone { 'satellite':
    endpoints => ['icinga-satellite1', 'icinga-satellite2'],
    parent    => 'master'
}

See Zone on docs.icinga.org for more info.

Hiera

You can use hiera to create icinga 2 objects in your server.

Example Usage: json file

{
  ...
  "icinga2::object::timeperiod": {
    "bra-office-hrs": {
      "timeperiod_display_name": "Brazilian WorkTime Hours",
      "ranges": {
        "monday": "12:00-21:00",
        "monday": "12:00-21:00",
        "monday": "12:00-21:00",
        "monday": "12:00-21:00",
        "monday": "12:00-21:00"
      }
    },
    "utc-office-hrs": {
      "timeperiod_display_name": "UTC WorkTime Hours",
      "ranges": {
        "monday": "08:00-17:00",
        "monday": "08:00-17:00",
        "monday": "08:00-17:00",
        "monday": "08:00-17:00",
        "monday": "08:00-17:00"
    }
  }
  ...
}

Objects available:

  • apply_dependency
  • apply_notification_to_host
  • apply_notification_to_service
  • apply_service
  • checkcommand
  • dependency
  • eventcommand
  • graphitewriter
  • hostgroup
  • host
  • idomysqlconnection
  • idopgsqlconnection
  • notificationcommand
  • notification
  • perfdatawriter
  • scheduleddowntime
  • servicegroup
  • service
  • sysloglogger
  • timeperiod
  • usergroup
  • user

Reference

Classes:

Coming soon...

Defined types:

Coming soon...

Limitations

Coming soon...

Development

###Contributing

To submit a pull request via Github, fork Icinga/puppet-icinga2 and make your changes in a feature branch off of the develop branch.

If your changes require any discussion, create an account on https://www.icinga.org/register/. Once you have an account, log onto dev.icinga.org. Create an issue under the Icinga Tools project and add it to the Puppet category.

If applicable for the changes you're making, add documentation to the README.md file.

###Support

Check the project website at http://www.icinga.org for status updates and https://support.icinga.org if you want to contact us.

Contributors

Coming soon...