Arduino library for controlling DS2482-100 and DS2482-800 1-wire masters.
Uses Wire library to communicate with DS2482 so be sure to call Wire.begin() before using the library.
Quick example modeled after Onewire example:
#include
#include
DS2482 ds(0);
void setup()
{
Wire.begin();
ds.reset();
//configure DS2482 to use active pull-up instead of pull-up resistor
//configure returns 0 if it cannot find DS2482 connected
//if (!ds.configure(DS2482_CONFIG_APU))
//{
// Serial.print("DS2482 not found\n");
//}
}
void loop()
{
byte addr[8];
if ( !ds.wireSearch(addr))
{
//Serial.print("No more addresses.\n");
ds.wireResetSearch();
return;
}
}