This project is based on Tiny-M (190^3 variant) + Smol StealthBurner modified for Phaetus Drgonfly BMO hotend.
The Smol StealthBurner is designed to use a MGN rail in front of X axis, so the following parts have been remixed:
-
XY joint (top and bottom on both sides). The depth has been increased by 6mm (from 40mm to 46mm) to avoid the belt rubs on X axis linear rail. You don't need additional hardware.
-
Z axis bed mount (both side). The depth has been increased by 15mm to grant the nozzle reaches all bed edges.
-
The StealthBurner cover has been remixed to add a 5050 SMD led like in the original Voron StealthBurner.
- 4x M3x8mm SHCS
- 2x M3x6mm BHCS
- 5x M3 Threaded Insert
- 2x M2x10mm self tapping screw
- 1x M3x8mm SHCS
- 4x M3x16mm SHCS
- 2x M3 Threaded Insert
- 4x M2.5x8mm (should be included with BMO)
- 4x M3 Threaded Insert
- 2x M3x6mm BHCS
- 2x M3x35mm SHCS or BHCS
- 2x M3x8mm SHCS
- 1x 3007 Fan (5v)
- 2x 3010 Blower Fan (12v or 24v)
- 1x PINDA Auto Bed Leveling Sensor
- 2x M3x8mm SHCS
I printed all with following settings:
- 5 top/bottom solid layers
- 4 perimeters
- 43% Triangles infill
I will write the documentation, in the meantime you can use the CAD.