For more information and updates: http://alexforencich.com/wiki/en/verilog/axis/start
GitHub repository: https://github.com/alexforencich/verilog-axis
Collection of AXI Stream bus components. Most components are fully parametrizable in interface widths. Includes full MyHDL testbench with intelligent bus cosimulation endpoints.
General-purpose parametrizable arbiter. Supports priority and round-robin arbitration. Supports blocking until request release or acknowledge.
The axis_adapter module bridges AXI stream busses of differing widths. The module is parametrizable, but there are certain restrictions. First, the bus word widths must be identical (e.g. one 8-bit lane and eight 8-bit lanes, but not one 16-bit lane and one 32-bit lane). Second, the bus widths must be related by an integer multiple (e.g. 2 words and 6 words, but not 4 words and 6 words). Wait states will be inserted on the wider bus side when necessary.
Frame-aware AXI stream arbitrated muliplexer with parametrizable data width and port count. Supports priority and round-robin arbitration.
Wrappers can generated with axis_arb_mux_wrap.py.
Configurable word-based or frame-based asynchronous FIFO with parametrizable data width, depth, type, and bad frame detection. Supports power of two depths only.
Consistent Overhead Byte Stuffing (COBS) decoder. Fixed 8 bit width.
Consistent Overhead Byte Stuffing (COBS) encoder. Fixed 8 bit width. Configurable zero insertion.
Basic crosspoint switch. tready signal not supported. Parametrizable data width.
Wrappers can generated with axis_crosspoint_wrap.py.
Frame-aware AXI stream demuliplexer with parametrizable data width and port count.
Configurable word-based or frame-based synchronous FIFO with parametrizable data width, depth, type, and bad frame detection. Supports power of two depths only.
Frame joiner with optional tag and parametrizable port count. 8 bit data path only.
Wrappers can generated with axis_frame_join_wrap.py.
Frame length adjuster module. Truncates or pads frames as necessary to meet the specified minimum and maximum length. Reports the original and current lengths as well as whether the packet was truncated or padded. Length limits are configurable at run time.
Frame length adjuster module with FIFO. Truncates or pads frames as necessary to meet the specified minimum and maximum length. Reports the original and current lengths as well as whether the packet was truncated or padded. FIFOs are used so that the status information can be read before the packet itself. Length limits are configurable at run time.
AXI stream to LocalLink bridge.
Frame-aware AXI stream muliplexer with parametrizable data width and port count.
Wrappers can generated with axis_mux_wrap.py.
Parametrizable register pipeline. LENGTH parameter determines number of register stages.
Fractional rate limiter, supports word and frame modes. Inserts wait states to limit data rate to specified ratio. Frame mode inserts wait states at end of frames, word mode ignores frames and inserts wait states at any point. Parametrizable data width. Rate and mode are configurable at run time.
Datapath register with parameter to select between skid buffer, simple buffer, and bypass. Use to improve timing for long routes.
SRL-based FIFO. Good for small FIFOs. SRLs on Xilinx FPGAs have a very fast input setup time, so this module can be used to aid in timing closure.
SRL-based register. SRLs on Xilinx FPGAs have a very fast input setup time, so this module can be used to aid in timing closure.
Statistics counter module. Counts bytes and frames passing through monitored AXI stream interface. Trigger signal used to reset and dump counts out of AXI interface, along with tag value. Use with axis_frame_join_N to form a single monolithic frame from multiple monitored points with the same trigger.
Frame-aware AXI stream switch with parametrizable data width and port count.
Wrappers can generated with axis_switch_wrap.py.
AXI stream tap module. Used to make a copy of an AXI stream bus without affecting the bus. Back-pressure on the output results in truncated frames with tuser set.
LocalLink to AXI stream bridge.
Parametrizable priority encoder.
tdata : Data (width generally DATA_WIDTH)
tkeep : Data word valid (width generally KEEP_WIDTH)
tvalid : Data valid
tready : Sink ready
tlast : End-of-frame
tid : Identifier tag (width generally ID_WIDTH)
tdest : Destination tag (width generally DEST_WIDTH)
tuser : User sideband signals (width generally USER_WIDTH)
DATA_WIDTH : width of tdata signal
KEEP_ENABLE : enable tkeep signal (default DATA_WIDTH>8)
KEEP_WIDTH : width of tkeep signal (default DATA_WIDTH/8)
LAST_ENABLE : enable tlast signal
ID_ENABLE : enable tid signal
ID_WIDTH : width of tid signal
DEST_ENABLE : enable tdest signal
DEST_WIDTH : width of tdest signal
USER_ENABLE : enable tuser signal
USER_WIDTH : width of tuser signal
USER_BAD_FRAME_VALUE : value of tuser indicating bad frame
USER_BAD_FRAME_MASK : bitmask for tuser bad frame indication
arbiter.v : General-purpose parametrizable arbiter
axis_adapter.v : Parametrizable bus width adapter
axis_arb_mux.v : Parametrizable arbitrated multiplexer
axis_async_fifo.v : Parametrizable asynchronous FIFO
axis_cobs_decode.v : COBS decoder
axis_cobs_encode.v : COBS encoder
axis_crosspoint.v : Parametrizable crosspoint switch
axis_demux.v : Parametrizable demultiplexer
axis_fifo.v : Parametrizable synchronous FIFO
axis_frame_join.v : Parametrizable frame joiner
axis_frame_length_adjust.v : Frame length adjuster
axis_frame_length_adjust_fifo.v : Frame length adjuster with FIFO
axis_ll_bridge.v : AXI stream to LocalLink bridge
axis_mux.v : Multiplexer generator
axis_rate_limit.v : Fractional rate limiter
axis_register.v : AXI Stream register
axis_srl_fifo.v : SRL-based FIFO
axis_srl_register.v : SRL-based register
axis_switch.v : Parametrizable AXI stream switch
axis_stat_counter.v : Statistics counter
axis_tap.v : AXI stream tap
ll_axis_bridge.v : LocalLink to AXI stream bridge
priority_encoder.v : Parametrizable priority encoder
two byte transfer with sink pause after each byte
__ __ __ __ __ __ __ __ __
clk __/ \__/ \__/ \__/ \__/ \__/ \__/ \__/ \__/ \__
_____ _________________
tdata XXXXXXXXX_D0__X_D1______________XXXXXXXXXXXXXXXXXXXXXXXX
_____ _________________
tkeep XXXXXXXXX_K0__X_K1______________XXXXXXXXXXXXXXXXXXXXXXXX
_______________________
tvalid ________/ \_______________________
______________ _____ ___________
tready \___________/ \___________/
_________________
tlast ______________/ \_______________________
tuser ________________________________________________________
two back-to-back packets, no pauses
__ __ __ __ __ __ __ __ __
clk __/ \__/ \__/ \__/ \__/ \__/ \__/ \__/ \__/ \__
_____ _____ _____ _____ _____ _____
tdata XXXXXXXXX_A0__X_A1__X_A2__X_B0__X_B1__X_B2__XXXXXXXXXXXX
_____ _____ _____ _____ _____ _____
tkeep XXXXXXXXX_K0__X_K1__X_K2__X_K0__X_K1__X_K2__XXXXXXXXXXXX
___________________________________
tvalid ________/ \___________
________________________________________________________
tready
_____ _____
tlast ____________________/ \___________/ \___________
tuser ________________________________________________________
bad frame
__ __ __ __ __ __
clk __/ \__/ \__/ \__/ \__/ \__/ \__
_____ _____ _____
tdata XXXXXXXXX_A0__X_A1__X_A2__XXXXXXXXXXXX
_____ _____ _____
tkeep XXXXXXXXX_K0__X_K1__X_K2__XXXXXXXXXXXX
_________________
tvalid ________/ \___________
______________________________________
tready
_____
tlast ____________________/ \___________
_____
tuser ____________________/ \___________
Running the included testbenches requires MyHDL and Icarus Verilog. Make sure that myhdl.vpi is installed properly for cosimulation to work correctly. The testbenches can be run with a Python test runner like nose or py.test, or the individual test scripts can be run with python directly.
tb/axis_ep.py : MyHDL AXI Stream endpoints
tb/ll_ep.py : MyHDL LocalLink endpoints