Issues
- 1
individual DMX_USE_PORT1
#73 opened by GralfR - 0
Changing Neopixel output pin does not work
#83 opened by particlerain - 0
DMX Address Translator using two UARTS
#82 opened by Lesateq - 1
DMXSerial and EncoderButton library
#81 opened by alex27riva - 2
Noise on one DMX channel
#77 opened by MicroMarty - 3
ESP8266 compatible?
#80 opened by kleinmantara - 3
Compatibility for Wemos D1 (ESP 8266)
#75 opened by blockiyt - 2
ESP32 resp. Odroid-GO for DMX-receiver
#35 opened by gustyfeinen - 0
flips out after 3 channels
#79 opened by tonyxforce - 2
New DMX modules does not operate well anymore
#78 opened by ctenov - 0
- 1
Arduino Uno Pin 2 Internal Pullup not working
#74 opened by Randomaker - 2
include DMXMODEPIN (pin 2) in documentation
#57 opened by Yorams - 0
- 1
DMXSerial.init(DMXReceiver) mode followed by DMXSerial.init(DMXController) mode in the same Arduino Uno R3 file
#71 opened by ChetNocatee - 8
Simultaneous sending and receiving DMX?
#48 opened by chendy - 0
Why this equation in the channel const?
#70 opened by damccull - 0
Is it possible to stop DMXSerial to start another serial port on the Arduino Uno?
#69 opened by KoenigTA - 2
No stable receiving - zero in between
#68 opened by kleinmantara - 3
DMX Sniff example not compiling
#64 opened by stijnb1234 - 2
DMX not communicating from lighting desk
#67 opened by finius04 - 0
- 0
Wrong prototype for _DMX_setMode()
#65 opened by hselasky - 1
Serial1 on Arduino MEGA doesn't work
#61 opened by Sakencky - 9
- 1
Anyone having clock stability experience?
#62 opened by EinDev - 10
ports 2 and 3 on mega
#59 opened by jaygrovr - 0
Frame error with dmx send
#58 opened by Delis2021 - 1
noDataSince() overflow
#56 opened by benjaminauer - 0
Reading error @ 40FPS
#55 opened by Joylight16888 - 5
Support for shield CTC-DRA-10-R2
#38 opened by davidmu23 - 3
- 2
- 2
- 3
megaavr PlatformsIO compability
#43 opened by jonolt - 0
- 2
DMXSerial.h with Arduino MEGA2560
#52 opened by MikeWDale - 2
Compile Error on Arduino MEGA2560
#51 opened by MikeWDale - 1
addresses above 16
#50 opened by 242bpm - 1
DMXSerial on ATTiny 1604
#32 opened by Johndhawk2 - 1
- 1
Receiving problem
#46 opened by ozyeng - 3
Error compilation
#47 opened by Kirdone - 1
- 2
Version 1.5.0 in GitHub differs from version from Arduino IDE library manager 1.5.0.
#41 opened by yunjova - 2
DMX512 format
#39 opened by MartinsKlavins - 4
Support for atmega4809?
#37 opened by andrewga - 1
Get wrong channel on DMX receive mode
#30 opened by heikoxxxx - 4
multiple definition of `__vector_19'
#33 opened by JLightMedia - 1
RDM Start Address over 256 not working
#31 opened by Kevitto