OpenTracing Tracer implementation for Jaeger in Ruby
Add this line to your application's Gemfile:
gem 'jaeger-client'
require 'jaeger/client'
OpenTracing.global_tracer = Jaeger::Client.build(host: 'localhost', port: 6831, service_name: 'echo')
OpenTracing.start_active_span('span name') do
# do something
OpenTracing.start_active_span('inner span name') do
# do something else
end
end
See opentracing-ruby for more examples.
RemoteReporter buffers spans in memory and sends them out of process using Sender.
There are two senders: UdpSender
(default) and HttpSender
.
To use HttpSender
:
OpenTracing.global_tracer = Jaeger::Client.build(
service_name: 'service_name',
reporter: Jaeger::Reporters::RemoteReporter.new(
sender: Jaeger::HttpSender.new(
url: 'http://localhost:14268/api/traces',
headers: { 'key' => 'value' }, # headers key is optional
encoder: Jaeger::Encoders::ThriftEncoder.new(service_name: 'service_name')
),
flush_interval: 10
)
)
NullReporter ignores all spans.
OpenTracing.global_tracer = Jaeger::Client.build(
service_name: 'service_name',
reporter: Jaeger::Reporters::NullReporter.new
)
LoggingReporter prints some details about the span using logger
. This is meant only for debugging. Do not parse and use this information for anything critical. The implemenation can change at any time.
OpenTracing.global_tracer = Jaeger::Client.build(
service_name: 'service_name',
reporter: Jaeger::Reporters::LoggingReporter.new
)
LoggingReporter can also use a custom logger. For this provide logger using logger
keyword argument.
Const
sampler always makes the same decision for new traces depending on the initialization value. Set sampler
to: Jaeger::Samplers::Const.new(true)
to mark all new traces as sampled.
Probabilistic
sampler samples traces with probability equal to rate
(must be between 0.0 and 1.0). This can be enabled by setting Jaeger::Samplers::Probabilistic.new(rate: 0.1)
RateLimiting
sampler samples at most max_traces_per_second
. The distribution of sampled traces follows burstiness of the service, i.e. a service with uniformly distributed requests will have those requests sampled uniformly as well, but if requests are bursty, especially sub-second, then a number of sequential requests can be sampled each second.
Set sampler
to Jaeger::Samplers::RateLimiting.new(max_traces_per_second: 100)
GuaranteedThroughputProbabilistic
is a sampler that guarantees a throughput by using a Probabilistic sampler and RateLimiting sampler The RateLimiting sampler is used to establish a lower_bound so that every operation is sampled at least once in the time interval defined by the lower_bound.
Set sampler
to Jaeger::Samplers::GuaranteedThroughputProbabilistic.new(lower_bound: 10, rate: 0.001)
PerOperation
sampler leverages both Probabilistic sampler and RateLimiting sampler via the GuaranteedThroughputProbabilistic sampler. This sampler keeps track of all operations and delegates calls the the respective GuaranteedThroughputProbabilistic sampler.
Set sampler
to
Jaeger::Samplers::PerOperation.new(
strategies: {
per_operation_strategies: [
{ operation: 'GET /articles', probabilistic_sampling: { sampling_rate: 0.5 } },
{ operation: 'POST /articles', probabilistic_sampling: { sampling_rate: 1.0 } }
],
default_sampling_probability: 0.001,
default_lower_bound_traces_per_second: 1.0 / (10.0 * 60.0)
},
max_operations: 1000
)
RemoteControlled
sampler is a sampler that is controller by jaeger agent. It starts out with Probabilistic
sampler. It polls the jaeger-agent and changes sampling strategy accordingly. Set sampler
to Jaeger::Client::Samplers::RemoteControlled.new(service_name: 'service_name')
.
RemoteControlled sampler options:
Param | Required | Description |
---|---|---|
service_name | x | name of the current service / application, same as given to Tracer |
sampler | initial sampler to use prior to retrieving strategies from Agent | |
refresh_interval | interval in seconds before sampling strategy refreshes (0 to not refresh, defaults to 60) | |
host | host for jaeger-agent (defaults to 'localhost') | |
port | port for jaeger-agent for SamplingManager endpoint (defaults to 5778) | |
logger | logger for communication between jaeger-agent (default to $stdout logger) |
It is possible to use W3C Trace Context headers to propagate the tracing information.
To set it up you need to change FORMAT_RACK injector and extractor.
OpenTracing.global_tracer = Jaeger::Client.build(
service_name: 'service_name',
injectors: {
OpenTracing::FORMAT_RACK => [Jaeger::Injectors::TraceContextRackCodec]
},
extractors: {
OpenTracing::FORMAT_RACK => [Jaeger::Extractors::TraceContextRackCodec]
}
)
Jaeger Tracer supports Zipkin B3 Propagation HTTP headers, which are used by a lot of Zipkin tracers. This means that you can use Jaeger in conjunction with OpenZipkin tracers.
To set it up you need to change FORMAT_RACK injector and extractor.
OpenTracing.global_tracer = Jaeger::Client.build(
service_name: 'service_name',
injectors: {
OpenTracing::FORMAT_RACK => [Jaeger::Injectors::B3RackCodec]
},
extractors: {
OpenTracing::FORMAT_RACK => [Jaeger::Extractors::B3RackCodec]
}
)
It's also possible to set up multiple injectors and extractors. Each injector will be called in sequence. Note that if multiple injectors are using the same keys then the values will be overwritten.
If multiple extractors is used then the span context from the first match will be returned.
Jaeger Tracer allows you to define process level tags. By default the tracer provides jaeger.version
, ip
and hostname
. You may want to overwrite ip
or hostname
if the tracer cannot auto-detect them.
OpenTracing.global_tracer = Jaeger::Client.build(
service_name: 'service_name',
tags: {
'hostname' => 'custom-hostname',
'custom_tag' => 'custom-tag-value'
}
)
After checking out the repo, run bin/setup
to install dependencies. Then, run rake spec
to run the tests. You can also run bin/console
for an interactive prompt that will allow you to experiment.
To install this gem onto your local machine, run bundle exec rake install
. To release a new version, update the version number in version.rb
, and then run bundle exec rake release
, which will create a git tag for the version, push git commits and tags, and push the .gem
file to rubygems.org.
Bug reports and pull requests are welcome on GitHub at https://github.com/salemove/jaeger-client-ruby
The gem is available as open source under the terms of the MIT License.