/teensy-cv

An opamp board to scale Eurorack control voltages into and out of ranges compatible with a Teensy MCU board

BSD 2-Clause "Simplified" LicenseBSD-2-Clause

An opamp board with attenuating pots on inputs to:

  • scale -5/+5V control voltage signals down to a voltage-referenced 0-2.5v range for reading by a Teensy's ADCs.
  • scale up output from Teensy's DAC (and a Teensy PWM output with a low-pass RC filter) to -5/+5V range.

Schematic

PCB

Note: output op amp configuration is inverting, which must be compensated for in code.