matthijskooijman/arduino-lmic
:warning: This library is deprecated, see the README for alternatives.
C
Pinned issues
Issues
- 8
PIN MAPPING PROBLEM
#295 opened by K3RN3L97 - 8
'do_send' was not declared in this scope
#268 opened by jbrepogmailcom - 1
Why I can't use LMIC_enableChannel(10);
#313 opened by belopezq - 3
Can't get downlink in MSP430 port
#288 opened by antonio-emilio - 2
Pinmap T-BEam compiler Error
#311 opened by Lordcybertracker - 1
Problem PicoD4
#312 opened by Lordcybertracker - 1
Sending data in uint32 instead of uint8
#310 opened by magicBanana3 - 5
Lora Node unable to receive downlink messages
#281 opened by sgodey - 1
What are opmodes? Are they listed somewhere?
#309 opened by tipo1000A - 6
- 0
Repeated port 0 null data messages being sent
#308 opened by haimiko - 5
Error with "ASSERT(v == 0x12 );"
#278 opened by jeremiahjohnford - 3
What is the LoRaWAN version? 1.0.x?
#307 opened by tibbis - 1
Start up issue.
#306 opened by semajoel - 1
- 2
- 1
Will this Library works with 433 Mhz hardware ?
#304 opened by Faizan2253 - 0
Will this Library works with 4
#303 opened by Faizan2253 - 1
Downlink from gateway to LMIC
#302 opened by nyxses - 0
- 1
Gurur Meditation Error
#300 opened by dragosmacovei - 11
Increase in payload
#282 opened by jfma26 - 12
- 3
- 1
Can't get OTAA to work TTGO ESP32 OLED V1 (TTN 868MHz)
#290 opened by jdeus - 3
IBM LMIC framework library version 1.5.0 + arduino-3 is not available in my library manager
#296 opened by Erik84750 - 0
- 3
How to do error handling in general
#275 opened by jens-234 - 1
Very low rate of success for Downlink
#291 opened - 23
- 2
Communication between node and gateway
#289 opened by Samuel-ZDM - 3
Date to RTC
#286 opened by Samuel-ZDM - 2
- 0
OTAA, ADR and LMIC_setLinkCheckMode
#284 opened by hackdaworld - 1
'DR_SF12' was not declared in this scope
#283 opened by tobiascrackz - 1
LMIC for IN865_867
#271 opened by krutarthtrivedi - 3
Used arduino-Lmic with board ATmega
#279 opened by TuongBui16 - 2
radio.c codes
#280 opened by Roberto6969 - 28
USB error after upload sketch
#273 opened by skuppens - 0
Wondering if we can set up a schedule using "const unsigned TX_INTERVAL"?
#277 opened by Rock-N-RollaMann - 1
sx1278 implement
#276 opened by xenpac - 2
LMIC with other backends
#274 opened by Percmau - 3
Doubt on Grove RFM95 module pin mapping
#272 opened by Percmau - 0
Failure radio.c:675
#269 opened by rzahoransky - 2
Library versioning
#267 opened by Roberto6969 - 3
Can someone help with MSB,LSB situation?
#266 opened by zpowellman - 0
Using Lora module with I2C I/O expander
#265 opened by martinpala - 3
Compilation error
#264 opened by jbrepogmailcom - 1
I can't see LMIC.dataLen
#263 opened by jcap3003 - 0
Frequency of Subband
#262 opened by FrancoCapraro