matthuszagh/fmcw-radar

Issues

• FPGA mode pins should be switchable

  #15 opened 4 years ago by matthuszagh
  0

• FT2232H clock should use clock-capable pin

  #14 opened 4 years ago by matthuszagh
  1

• Microstrip corners should be rounded

  #13 opened 4 years ago by matthuszagh
  1

• Power amplifier is turned on when power is supplied

  #10 opened 4 years ago by matthuszagh
  1

• 500KHz tone in output

  #12 opened 4 years ago by matthuszagh
  1

• USB type C

  #1 opened 4 years ago by matthuszagh
  0

• Fix FT2232H EEPROM

  #3 opened 4 years ago by matthuszagh
  0

• ADC references are not connected to 3V power rails

  #11 opened 4 years ago by matthuszagh
  1

• Change pushbutton switch type

  #5 opened 4 years ago by matthuszagh
  0

• Change no lead to leaded.

  #4 opened 4 years ago by matthuszagh
  0

• ECP5

  #6 opened 4 years ago by matthuszagh
  1

• Multiplexed fmcw

  #8 opened 5 years ago by AlexBdx
  7

• Homemade horn antenna

  #9 opened 5 years ago by AlexBdx
  16

• Patch antenna

  #7 opened 5 years ago by AlexBdx
  24

• SMA ground cutouts

  #2 opened 5 years ago by matthuszagh
  0