matthuszagh/fmcw

Issues

• Coupler should maybe be implemented on internal layer

  #9 opened 4 years ago by matthuszagh
  0

• Replace Wilkinson divider and attenuators with resistive power splitter

  #4 opened 4 years ago by matthuszagh
  0

• allow processing and plotting directly from log file

  #8 opened 4 years ago by matthuszagh
  0

• simulate patch array antenna

  #7 opened 4 years ago by matthuszagh
  0

• power amp heat dissipation

  #6 opened 4 years ago by matthuszagh
  0

• ensure exposed copper below power amp is connected directly to surrounding ground plane

  #5 opened 4 years ago by matthuszagh
  0

• Verify coupler performance with VNA

  #2 opened 4 years ago by matthuszagh
  0

• Verify performance of bypass capacitor after RF amplifier with VNA

  #3 opened 4 years ago by matthuszagh
  0

• allow programming spi flash so that fpga loads bitstream on startup

  #1 opened 4 years ago by matthuszagh
  0