Elixircom

A serial port terminal emulator for IEx.

This is useful if you are using Elixir projects that involve communicating with serial port devices that need a terminal like environment. Inspired by picocom.

To use it, add this project to your deps:

def deps do
  [
    {:elixircom, "~> 0.2.0"}
  ]
end

Once built, you can run it interactively be starting it from the IEx prompt. Here's an example that uses Elixircom to interact with a modem:

$ cd elixircom
$ iex -S mix
iex> Elixircom.run("/dev/tty.usbmodem14103", speed: 115_200)
AT
OK

^B
iex>

The name that you use will depend on your computer. This opens a serial port on OSX. To get a list of serial ports, run Circuits.UART.enumerate(). The speed parameter is optional. See Circuits.UART.open/3 for other options.

$ cd elixircom
$ iex -S mix
Erlang/OTP 21 [erts-10.0.8] [source] [64-bit] [smp:8:8] [ds:8:8:10] [async-threads:1] [hipe]

Interactive Elixir (1.7.3) - press Ctrl+C to exit (type h() ENTER for help)
iex> Circuits.UART.enumerate()
%{
  "ttyUSB0" => %{
    description: "FT232R USB UART",
    manufacturer: "FTDI",
    product_id: 24577,
    serial_number: "AH05M2WB",
    vendor_id: 1027
  },
  "ttyUSB1" => %{
    description: "Qualcomm CDMA Technologies MSM",
    manufacturer: "Qualcomm, Incorporated",
    product_id: 37042,
    serial_number: "ed3b781a",
    vendor_id: 1478
  },
iex> Elixircom.run("/dev/ttyUSB1")
AT
OK

mattludwigs/elixircom

Elixircom