mattsaxon/HASS-Jablotron80

Issues

• MQTT remote control

  #6 opened 3 years ago by Thoky81
  12

• input irq status

  #10 opened 3 years ago by Thoky81
  3

• when configuring -> Unknown status packet is b'\x82\x01`\x00\x00\x00\x00\x00'

  #18 opened 3 years ago by Eerk1975
  8

• Keypad disappears.

  #19 opened 3 years ago by Thoky81
  15

• Detect wireless siren power failure

  #21 opened 3 years ago by FraBoCH
  1

• Support JA-83

  #26 opened 3 years ago by blavak68
  1

• Please help me with the configuration

  #27 opened 3 years ago by flaakesk8
  11

• Jablotron JA-60

  #28 opened 3 years ago by albasee
  2

• Status of Sensors for Jablotron 80

  #29 opened 3 years ago by Marclinh0
  7

• support for JA-80BT (bluetooth dongle)

  #31 opened 3 years ago by mazzy89
  2

• Can i see the trigger a bit earlier ?

  #35 opened 3 years ago by lambertvenema
  1

• JA-80T functionality

  #36 opened 3 years ago by phrachovina
  1

• Alarm is considered as triggered incorrectly in case of a sabotaged sensor

  #23 opened 3 years ago by FraBoCH
  1

• Source alarm name not known yet

  #25 opened 3 years ago by yuripace
  5

• New feature: virtual keypad

  #22 opened 3 years ago by yuripace
  1

• No 'version' key in the manifest

  #30 opened 3 years ago by JohnnyM84
  3

• which alarm_code to use

  #33 opened 3 years ago by lambertvenema
  1

• Integration not working

  #34 opened 3 years ago by booroondook-eng
  1

• Integration 'Jablotron80' not found

  #32 opened 3 years ago by booroondook-eng
  6

• Unable to activate alarm

  #13 opened 4 years ago by yuripace
  2

• Trying to make it work on a JA-82K with a "simple" USB to TTL converted based on CP2102 chipset

  #15 opened 4 years ago by FraBoCH
  1

• 0.108.1 update

  #14 opened 5 years ago by Thoky81
  4

• Unknown status packet

  #9 opened 5 years ago by Thoky81
  17

• questions about the installation

  #12 opened 5 years ago by JWTeunisse
  1

• 0.103.0 update

  #11 opened 5 years ago by Thoky81
  6

• Alarm code

  #5 opened 5 years ago by Thoky81
  5

• USB over IP

  #8 opened 5 years ago by Thoky81
  1

• Sending service code?

  #4 opened 5 years ago by lambertvenema
  7

• arm night missing in HA alarm card

  #7 opened 5 years ago by Thoky81
  9

• USB instead of serial?

  #1 opened 5 years ago by Aesculapius
  3