Rails Authentication from Scratch

If you're like me then you probably take Devise for granted because you're too intimidated to roll your own authentication system. As powerful as Devise is, it's not perfect. There are plenty of cases where I've reached for it only to end up constrained by its features and design, and wished I could customize it exactly to my liking.

Fortunately, Rails gives you all the tools you need to roll your own authentication system from scratch without needing to depend on a gem. The challenge is just knowing how to account for edge cases while being cognizant of security and best practices.

Previous Versions

This guide is continuously updated to account for best practices. You can view previous releases here.

Local Development

Simply run the setup script and follow the prompts to see the final application.

./bin/setup

Step 1: Build User Model

Generate User model.

rails g model User email:string

# db/migrate/[timestamp]_create_users.rb
class CreateUsers < ActiveRecord::Migration[6.1]
  def change
    create_table :users do |t|
      t.string :email, null: false

      t.timestamps
    end

    add_index :users, :email, unique: true
  end
end

Run migrations.

rails db:migrate

Add validations and callbacks.

# app/models/user.rb
class User < ApplicationRecord
  before_save :downcase_email

  validates :email, format: {with: URI::MailTo::EMAIL_REGEXP}, presence: true, uniqueness: true

  private

  def downcase_email
    self.email = email.downcase
  end
end

What's Going On Here?

We prevent empty values from being saved into the email column through a null: false constraint in addition to the presence validation.

We enforce unique email addresses at the database level through add_index :users, :email, unique: true in addition to a uniqueness validation.

We ensure all emails are valid through a format validation.

We save all emails to the database in a downcase format via a before_save callback such that the values are saved in a consistent format.

We use URI::MailTo::EMAIL_REGEXP that comes with Ruby to validate that the email address is properly formatted.

Step 2: Add Confirmation and Password Columns to Users Table

Create migration.

rails g migration add_confirmation_and_password_columns_to_users confirmed_at:datetime password_digest:string

Update the migration.

# db/migrate/[timestamp]_add_confirmation_and_password_columns_to_users.rb
class AddConfirmationAndPasswordColumnsToUsers < ActiveRecord::Migration[6.1]
  def change
    add_column :users, :confirmed_at, :datetime
    add_column :users, :password_digest, :string, null: false
  end
end

What's Going On Here?

The confirmed_at column will be set when a user confirms their account. This will help us determine who has confirmed their account and who has not.

The password_digest column will store a hashed version of the user's password. This is provided by the has_secure_password method.

Run migrations.

rails db:migrate

Enable and install BCrypt.

This is needed to use has_secure_password.

# Gemfile
gem 'bcrypt', '~> 3.1.7'

bundle install

Update the User Model.

# app/models/user.rb
class User < ApplicationRecord
  CONFIRMATION_TOKEN_EXPIRATION = 10.minutes

  has_secure_password

  before_save :downcase_email

  validates :email, format: {with: URI::MailTo::EMAIL_REGEXP}, presence: true, uniqueness: true

  def confirm!
    update_columns(confirmed_at: Time.current)
  end

  def confirmed?
    confirmed_at.present?
  end

  def generate_confirmation_token
    signed_id expires_in: CONFIRMATION_TOKEN_EXPIRATION, purpose: :confirm_email
  end

  def unconfirmed?
    !confirmed?
  end

  private

  def downcase_email
    self.email = email.downcase
  end
end

What's Going On Here?

The has_secure_password method is added to give us an API to work with the password_digest column.

The confirm! method will be called when a user confirms their email address. We still need to build this feature.

The confirmed? and unconfirmed? methods allow us to tell whether a user has confirmed their email address or not.

The generate_confirmation_token method creates a signed_id that will be used to securely identify the user. For added security, we ensure that this ID will expire in 10 minutes (this can be controlled with the CONFIRMATION_TOKEN_EXPIRATION constant) and give it an explicit purpose of :confirm_email. This will be useful when we build the confirmation mailer.

Step 3: Create Sign Up Pages

Create a simple home page since we'll need a place to redirect users to after they sign up.

rails g controller StaticPages home

Create Users Controller.

rails g controller Users

# app/controllers/users_controller.rb
class UsersController < ApplicationController

  def create
    @user = User.new(user_params)
    if @user.save
      redirect_to root_path, notice: "Please check your email for confirmation instructions."
    else
      render :new, status: :unprocessable_entity
    end
  end

  def new
    @user = User.new
  end

  private

  def user_params
    params.require(:user).permit(:email, :password, :password_confirmation)
  end
end

Build sign-up form.

<!-- app/views/shared/_form_errors.html.erb -->
<% if object.errors.any? %>
  <ul>
    <% object.errors.full_messages.each do |message| %>
      <li><%= message %></li>
    <% end %>
  </ul>
<% end %>

<!-- app/views/users/new.html.erb -->
<%= form_with model: @user, url: sign_up_path do |form| %>
  <%= render partial: "shared/form_errors", locals: { object: form.object } %>
  <div>
    <%= form.label :email %>
    <%= form.email_field :email, required: true %>
  </div>
  <div>
    <%= form.label :password %>
    <%= form.password_field :password, required: true %>
  </div>
  <div>
    <%= form.label :password_confirmation %>
    <%= form.password_field :password_confirmation, required: true %>
  </div>
  <%= form.submit "Sign Up" %>
<% end %>

Update routes.

# config/routes.rb
Rails.application.routes.draw do
  root "static_pages#home"
  post "sign_up", to: "users#create"
  get "sign_up", to: "users#new"
end

Step 4: Create Confirmation Pages

Users now have a way to sign up, but we need to verify their email address to prevent SPAM.

Create Confirmations Controller.

rails g controller Confirmations

# app/controllers/confirmations_controller.rb
class ConfirmationsController < ApplicationController

  def create
    @user = User.find_by(email: params[:user][:email].downcase)

    if @user.present? && @user.unconfirmed?
      redirect_to root_path, notice: "Check your email for confirmation instructions."
    else
      redirect_to new_confirmation_path, alert: "We could not find a user with that email or that email has already been confirmed."
    end
  end

  def edit
    @user = User.find_signed(params[:confirmation_token], purpose: :confirm_email)

    if @user.present?
      @user.confirm!
      redirect_to root_path, notice: "Your account has been confirmed."
    else
      redirect_to new_confirmation_path, alert: "Invalid token."
    end
  end

  def new
    @user = User.new
  end

end

Build confirmation pages.

This page will be used in the case where a user did not receive their confirmation instructions and needs to have them resent.

<!-- app/views/confirmations/new.html.erb -->
<%= form_with model: @user, url: confirmations_path do |form| %>
  <%= form.email_field :email, required: true %>
  <%= form.submit "Confirm Email" %>
<% end %>

Update routes.

# config/routes.rb
Rails.application.routes.draw do
  ...
  resources :confirmations, only: [:create, :edit, :new], param: :confirmation_token
end

What's Going On Here?

The create action will be used to resend confirmation instructions to an unconfirmed user. We still need to build this mailer, and we still need to send this mailer when a user initially signs up. This action will be requested via the form on app/views/confirmations/new.html.erb. Note that we call downcase on the email to account for case sensitivity when searching.

The edit action is used to confirm a user's email. This will be the page that a user lands on when they click the confirmation link in their email. We still need to build this. Note that we're looking up a user through the find_signed method and not their email or ID. This is because The confirmation_token is randomly generated and can't be guessed or tampered with unlike an email or numeric ID. This is also why we added param: :confirmation_token as a named route parameter.

You'll remember that the confirmation_token is a signed_id, and is set to expire in 10 minutes. You'll also note that we need to pass the method purpose: :confirm_email to be consistent with the purpose that was set in the generate_confirmation_token method.

Step 5: Create Confirmation Mailer

Now we need a way to send a confirmation email to our users for them to actually confirm their accounts.

Create a confirmation mailer.

rails g mailer User confirmation

# app/mailers/user_mailer.rb
class UserMailer < ApplicationMailer
  default from: User::MAILER_FROM_EMAIL

  def confirmation(user, confirmation_token)
    @user = user
    @confirmation_token = confirmation_token

    mail to: @user.email, subject: "Confirmation Instructions"
  end
end

<!-- app/views/user_mailer/confirmation.html.erb -->
<h1>Confirmation Instructions</h1>

<%= link_to "Click here to confirm your email.", edit_confirmation_url(@confirmation_token) %>

<!-- app/views/user_mailer/confirmation.text.erb -->
Confirmation Instructions

<%= edit_confirmation_url(@confirmation_token) %>

Update User Model.

# app/models/user.rb
class User < ApplicationRecord
  ...
  MAILER_FROM_EMAIL = "no-reply@example.com"
  ...
  def send_confirmation_email!
    confirmation_token = generate_confirmation_token
    UserMailer.confirmation(self, confirmation_token).deliver_now
  end

end

What's Going On Here?

The MAILER_FROM_EMAIL constant is a way for us to set the email used in the UserMailer. This is optional.

The send_confirmation_email! method will create a new confirmation_token. This is to ensure confirmation links expire and cannot be reused. It will also send the confirmation email to the user.

We call update_columns so that the updated_at/updated_on columns are not updated. This is personal preference, but those columns should typically only be updated when the user updates their email or password.

The links in the mailer will take the user to ConfirmationsController#edit at which point they'll be confirmed.

Configure Action Mailer so that links work locally.

Add a host to the test and development (and later the production) environments so that urls will work in mailers.

# config/environments/test.rb
Rails.application.configure do
  ...
  config.action_mailer.default_url_options = { host: "example.com" }
end

# config/environments/development.rb
Rails.application.configure do
  ...
  config.action_mailer.default_url_options = { host: "localhost", port: 3000 }
end

Update Controllers.

Now we can send a confirmation email when a user signs up or if they need to have it resent.

# app/controllers/confirmations_controller.rb
class ConfirmationsController < ApplicationController

  def create
    @user = User.find_by(email: params[:user][:email].downcase)

    if @user.present? && @user.unconfirmed?
      @user.send_confirmation_email!
      ...
    end
  end

end

# app/controllers/users_controller.rb
class UsersController < ApplicationController

  def create
    @user = User.new(user_params)
    if @user.save
      @user.send_confirmation_email!
      ...
    end
  end

end

Step 6: Create Current Model and Authentication Concern

Create a model to store the current user.

# app/models/current.rb
class Current < ActiveSupport::CurrentAttributes
  attribute :user
end

Create a Concern to store helper methods that will be shared across the application.

# app/controllers/concerns/authentication.rb
module Authentication
  extend ActiveSupport::Concern

  included do
    before_action :current_user
    helper_method :current_user
    helper_method :user_signed_in?
  end

  def login(user)
    reset_session
    session[:current_user_id] = user.id
  end

  def logout
    reset_session
  end

  def redirect_if_authenticated
    redirect_to root_path, alert: "You are already logged in." if user_signed_in?
  end

  private

  def current_user
    Current.user ||= session[:current_user_id] && User.find_by(id: session[:current_user_id])
  end

  def user_signed_in?
    Current.user.present?
  end

end

Load the Authentication Concern into the Application Controller.

# app/controllers/application_controller.rb
class ApplicationController < ActionController::Base
  include Authentication
end

What's Going On Here?

The Current class inherits from ActiveSupport::CurrentAttributes which allows us to keep all per-request attributes easily available to the whole system. In essence, this will allow us to set a current user and have access to that user during each request to the server.

The Authentication Concern provides an interface for logging the user in and out. We load it into the ApplicationController so that it will be used across the whole application.

The login method first resets the session to account for session fixation.

We set the user's ID in the session so that we can have access to the user across requests. The user's ID won't be stored in plain text. The cookie data is cryptographically signed to make it tamper-proof. And it is also encrypted so anyone with access to it can't read its contents.

The logout method simply resets the session.

The redirect_if_authenticated method checks to see if the user is logged in. If they are, they'll be redirected to the root_path. This will be useful on pages an authenticated user should not be able to access, such as the login page.

The current_user method returns a User and sets it as the user on the Current class we created. We use memoization to avoid fetching the User each time we call the method. We call the before_action filter so that we have access to the current user before each request. We also add this as a helper_method so that we have access to current_user in the views.

The user_signed_in? method simply returns true or false depending on whether the user is signed in or not. This is helpful for conditionally rendering items in views.

Step 7: Create Login Page

Generate Sessions Controller.

rails g controller Sessions

# app/controllers/sessions_controller.rb
class SessionsController < ApplicationController
  before_action :redirect_if_authenticated, only: [:create, :new]

  def create
    @user = User.find_by(email: params[:user][:email].downcase)
    if @user
      if @user.unconfirmed?
        redirect_to new_confirmation_path, alert: "Incorrect email or password."
      elsif @user.authenticate(params[:user][:password])
        login @user
        redirect_to root_path, notice: "Signed in."
      else
        flash.now[:alert] = "Incorrect email or password."
        render :new, status: :unprocessable_entity
      end
    else
      flash.now[:alert] = "Incorrect email or password."
      render :new, status: :unprocessable_entity
    end
  end

  def destroy
    logout
    redirect_to root_path, notice: "Signed out."
  end

  def new
  end

end

Update routes.

# config/routes.rb
Rails.application.routes.draw do
  ...
  post "login", to: "sessions#create"
  delete "logout", to: "sessions#destroy"
  get "login", to: "sessions#new"
end

Add sign-in form.

<!-- app/views/sessions/new.html.erb -->
<%= form_with url: login_path, scope: :user do |form| %>
  <div>
    <%= form.label :email %>
    <%= form.email_field :email, required: true %>
  </div>
  <div>
    <%= form.label :password %>
    <%= form.password_field :password, required: true %>
  </div>
  <%= form.submit "Sign In" %>
<% end %>

What's Going On Here?

The create method simply checks if the user exists and is confirmed. If they are, then we check their password. If the password is correct, we log them in via the login method we created in the Authentication Concern. Otherwise, we render an alert.

We're able to call user.authenticate because of has_secure_password

Note that we call downcase on the email to account for case sensitivity when searching.

Note that we set the flash to "Incorrect email or password." if the user is unconfirmed. This prevents leaking email addresses.

The destroy method simply calls the logout method we created in the Authentication Concern.

The login form is passed a scope: :user option so that the params are namespaced as params[:user][:some_value]. This is not required, but it helps keep things organized.

Step 8: Update Existing Controllers

Update Controllers to prevent authenticated users from accessing pages intended for anonymous users.

# app/controllers/confirmations_controller.rb
class ConfirmationsController < ApplicationController
  before_action :redirect_if_authenticated, only: [:create, :new]

  def edit
    ...
    if @user.present?
      @user.confirm!
      login @user
      ...
    else
    end
    ...
  end
end

Note that we also call login @user once a user is confirmed. That way they'll be automatically logged in after confirming their email.

# app/controllers/users_controller.rb
class UsersController < ApplicationController
  before_action :redirect_if_authenticated, only: [:create, :new]
  ...
end

Step 9: Add Password Reset Functionality

Update User Model.

# app/models/user.rb
class User < ApplicationRecord
  ...
  PASSWORD_RESET_TOKEN_EXPIRATION = 10.minutes
  ...
  def generate_password_reset_token
    signed_id expires_in: PASSWORD_RESET_TOKEN_EXPIRATION, purpose: :reset_password
  end
  ...
  def send_password_reset_email!
    password_reset_token = generate_password_reset_token
    UserMailer.password_reset(self, password_reset_token).deliver_now
  end
  ...
end

Update User Mailer.

# app/mailers/user_mailer.rb
class UserMailer < ApplicationMailer
  ...
  def password_reset(user, password_reset_token)
    @user = user
    @password_reset_token = password_reset_token

    mail to: @user.email, subject: "Password Reset Instructions"
  end
end

<!-- app/views/user_mailer/password_reset.html.erb -->
<h1>Password Reset Instructions</h1>

<%= link_to "Click here to reset your password.", edit_password_url(@password_reset_token) %>

<!-- app/views/user_mailer/password_reset.text.erb -->
Password Reset Instructions

<%= edit_password_url(@password_reset_token) %>

What's Going On Here?

The generate_password_reset_token method creates a signed_id that will be used to securely identify the user. For added security, we ensure that this ID will expire in 10 minutes (this can be controlled with the PASSWORD_RESET_TOKEN_EXPIRATION constant) and give it an explicit purpose of :reset_password.

The send_password_reset_email! method will create a new password_reset_token. This is to ensure password reset links expire and cannot be reused. It will also send the password reset email to the user.

Step 10: Build Password Reset Forms

Create Passwords Controller.

rails g controller Passwords

# app/controllers/passwords_controller.rb
class PasswordsController < ApplicationController
  before_action :redirect_if_authenticated

  def create
    @user = User.find_by(email: params[:user][:email].downcase)
    if @user.present?
      if @user.confirmed?
        @user.send_password_reset_email!
        redirect_to root_path, notice: "If that user exists we've sent instructions to their email."
      else
        redirect_to new_confirmation_path, alert: "Please confirm your email first."
      end
    else
      redirect_to root_path, notice: "If that user exists we've sent instructions to their email."
    end
  end

  def edit
    @user = User.find_signed(params[:password_reset_token], purpose: :reset_password)
    if @user.present? && @user.unconfirmed?
      redirect_to new_confirmation_path, alert: "You must confirm your email before you can sign in."
    elsif @user.nil?
      redirect_to new_password_path, alert: "Invalid or expired token."
    end
  end

  def new
  end

  def update
    @user = User.find_signed(params[:password_reset_token], purpose: :reset_password)
    if @user
      if @user.unconfirmed?
        redirect_to new_confirmation_path, alert: "You must confirm your email before you can sign in."
      elsif @user.update(password_params)
        redirect_to login_path, notice: "Sign in."
      else
        flash.now[:alert] = @user.errors.full_messages.to_sentence
        render :edit, status: :unprocessable_entity
      end
    else
      flash.now[:alert] = "Invalid or expired token."
      render :new, status: :unprocessable_entity
    end
  end

  private

  def password_params
    params.require(:user).permit(:password, :password_confirmation)
  end
end

What's Going On Here?

The create action will send an email to the user containing a link that will allow them to reset the password. The link will contain their password_reset_token which is unique and expires. Note that we call downcase on the email to account for case sensitivity when searching.

You'll remember that the password_reset_token is a signed_id, and is set to expire in 10 minutes. You'll also note that we need to pass the method purpose: :reset_password to be consistent with the purpose that was set in the generate_password_reset_token method.

Note that we return Invalid or expired token. if the user is not found. This makes it difficult for a bad actor to use the reset form to see which email accounts exist on the application.

The edit action simply renders the form for the user to update their password. It attempts to find a user by their password_reset_token. You can think of the password_reset_token as a way to identify the user much like how we normally identify records by their ID. However, the password_reset_token is randomly generated and will expire so it's more secure.

The new action simply renders a form for the user to put their email address in to receive the password reset email.

The update also ensures the user is identified by their password_reset_token. It's not enough to just do this on the edit action since a bad actor could make a PUT request to the server and bypass the form.

If the user exists and is confirmed we update their password to the one they will set in the form. Otherwise, we handle each failure case differently.

Update Routes.

# config/routes.rb
Rails.application.routes.draw do
  ...
  resources :passwords, only: [:create, :edit, :new, :update], param: :password_reset_token
end

What's Going On Here?

We add param: :password_reset_token as a named route parameter so that we can identify users by their password_reset_token and not id. This is similar to what we did with the confirmations routes and ensures a user cannot be identified by their ID.

Build forms.

<!-- app/views/passwords/new.html.erb -->
<%= form_with url: passwords_path, scope: :user do |form| %>
  <%= form.email_field :email, required: true %>
  <%= form.submit "Reset Password" %>
<% end %>

<!-- app/views/passwords/edit.html.erb -->
<%= form_with url: password_path(params[:password_reset_token]), scope: :user, method: :put do |form| %>
  <div>
    <%= form.label :password %>
    <%= form.password_field :password, required: true %>
  </div>
  <div>
    <%= form.label :password_confirmation %>
    <%= form.password_field :password_confirmation, required: true %>
  </div>
  <%= form.submit "Update Password" %>
<% end %>

What's Going On Here?

The password reset form is passed a scope: :user option so that the params are namespaced as params[:user][:some_value]. This is not required, but it helps keep things organized.

Step 11: Add Unconfirmed Email Column To Users Table

Create and run migration.

rails g migration add_unconfirmed_email_to_users unconfirmed_email:string
rails db:migrate

Update User Model.

# app/models/user.rb
class User < ApplicationRecord
  ...
  attr_accessor :current_password
  ...
  before_save :downcase_unconfirmed_email
  ...
  validates :unconfirmed_email, format: {with: URI::MailTo::EMAIL_REGEXP, allow_blank: true}

  def confirm!
    if unconfirmed_or_reconfirming?
      if unconfirmed_email.present?
        return false unless update(email: unconfirmed_email, unconfirmed_email: nil)
      end
      update_columns(confirmed_at: Time.current)
    else
      false
    end
  end
  ...
  def confirmable_email
    if unconfirmed_email.present?
      unconfirmed_email
    else
      email
    end
  end
  ...
  def reconfirming?
    unconfirmed_email.present?
  end

  def unconfirmed_or_reconfirming?
    unconfirmed? || reconfirming?
  end

  private
  ...
  def downcase_unconfirmed_email
    return if unconfirmed_email.nil?
    self.unconfirmed_email = unconfirmed_email.downcase
  end

end

What's Going On Here?

We add a unconfirmed_email column to the users table so that we have a place to store the email a user is trying to use after their account has been confirmed with their original email.

We add attr_accessor :current_password so that we'll be able to use f.password_field :current_password in the user form (which doesn't exist yet). This will allow us to require the user to submit their current password before they can update their account.

We ensure to format the unconfirmed_email before saving it to the database. This ensures all data is saved consistently.

We add validations to the unconfirmed_email column ensuring it's a valid email address.

We update the confirm! method to set the email column to the value of the unconfirmed_email column, and then clear out the unconfirmed_email column. This will only happen if a user is trying to confirm a new email address. Note that we return false if updating the email address fails. This could happen if a user tries to confirm an email address that has already been confirmed.

We add the confirmable_email method so that we can call the correct email in the updated UserMailer.

We add reconfirming? and unconfirmed_or_reconfirming? to help us determine what state a user is in. This will come in handy later in our controllers.

Update User Mailer.

# app/mailers/user_mailer.rb
class UserMailer < ApplicationMailer

  def confirmation(user, confirmation_token)
    ...
    mail to: @user.confirmable_email, subject: "Confirmation Instructions"
  end
end

Update Confirmations Controller.

# app/controllers/confirmations_controller.rb
class ConfirmationsController < ApplicationController
  ...
  def edit
    ...
    if @user.present?
      if @user.confirm!
        login @user
        redirect_to root_path, notice: "Your account has been confirmed."
      else
        redirect_to new_confirmation_path, alert: "Something went wrong."
      end
    else
      ...
    end
  end
  ...
end

What's Going On Here?

We update the edit method to account for the return value of @user.confirm!. If for some reason @user.confirm! returns false (which would most likely happen if the email has already been taken) then we render a generic error. This prevents leaking email addresses.

Step 12: Update Users Controller

Update Authentication Concern.

# app/controllers/concerns/authentication.rb
module Authentication
  ...
  def authenticate_user!
    redirect_to login_path, alert: "You need to login to access that page." unless user_signed_in?
  end
  ...
end

What's Going On Here?

The authenticate_user! method can be called to ensure an anonymous user cannot access a page that requires a user to be logged in. We'll need this when we build the page allowing a user to edit or delete their profile.

Add destroy, edit and update methods. Modify create method and user_params.

# app/controllers/users_controller.rb
class UsersController < ApplicationController
  before_action :authenticate_user!, only: [:edit, :destroy, :update]
  ...
  def create
    @user = User.new(create_user_params)
    ...
  end

  def destroy
    current_user.destroy
    reset_session
    redirect_to root_path, notice: "Your account has been deleted."
  end

  def edit
    @user = current_user
  end
  ...
  def update
    @user = current_user
    if @user.authenticate(params[:user][:current_password])
      if @user.update(update_user_params)
        if params[:user][:unconfirmed_email].present?
          @user.send_confirmation_email!
          redirect_to root_path, notice: "Check your email for confirmation instructions."
        else
          redirect_to root_path, notice: "Account updated."
        end
      else
        render :edit, status: :unprocessable_entity
      end
    else
      flash.now[:error] = "Incorrect password"
      render :edit, status: :unprocessable_entity
    end
  end

  private

  def create_user_params
    params.require(:user).permit(:email, :password, :password_confirmation)
  end

  def update_user_params
    params.require(:user).permit(:current_password, :password, :password_confirmation, :unconfirmed_email)
  end
end

What's Going On Here?

We call authenticate_user! before editing, destroying, or updating a user since only an authenticated user should be able to do this.

We update the create method to accept create_user_params (formerly user_params). This is because we're going to require different parameters for creating an account vs. editing an account.

The destroy action simply deletes the user and logs them out. Note that we're calling current_user, so this action can only be scoped to the user who is logged in.

The edit action simply assigns @user to the current_user so that we have access to the user in the edit form.

The update action first checks if their password is correct. Note that we're passing this in as current_password and not password. This is because we still want a user to be able to change their password and therefore we need another parameter to store this value. This is also why we have a private update_user_params method.

If the user is updating their email address (via unconfirmed_email) we send a confirmation email to that new email address before setting it as the email value.

We force a user to always put in their current_password as an extra security measure in case someone leaves their browser open on a public computer.

Update routes.

# config/routes.rb
Rails.application.routes.draw do
  ...
  put "account", to: "users#update"
  get "account", to: "users#edit"
  delete "account", to: "users#destroy"
  ...
end

Create an edit form.

<!-- app/views/users/edit.html.erb -->
<%= form_with model: @user, url: account_path, method: :put do |form| %>
  <%= render partial: "shared/form_errors", locals: { object: form.object } %>
  <div>
    <%= form.label :email, "Current Email" %>
    <%= form.email_field :email, disabled: true %>
  </div>
  <div>
    <%= form.label :unconfirmed_email, "New Email" %>
    <%= form.text_field :unconfirmed_email %>
  </div>
  <div>
    <%= form.label :password, "Password (leave blank if you don't want to change it)" %>
    <%= form.password_field :password %>
  </div>
  <div>
    <%= form.label :password_confirmation %>
    <%= form.password_field :password_confirmation %>
  </div>
  <hr/>
  <div>
    <%= form.label :current_password, "Current password (we need your current password to confirm your changes)" %>
    <%= form.password_field :current_password, required: true %>
  </div>
  <%= form.submit "Update Account" %>
<% end %>

What's Going On Here?

We disable the email field to ensure we're not passing that value back to the controller. This is just so the user can see what their current email is.

We require the current_password field since we'll always want a user to confirm their password before making changes.

The password and password_confirmation fields are there if a user wants to update their current password.

Step 13: Update Confirmations Controller

Update edit action.

# app/controllers/confirmations_controller.rb
class ConfirmationsController < ApplicationController
  ...
  def edit
    ...
    if @user.present? && @user.unconfirmed_or_reconfirming?
      ...
    end
  end
  ...
end

What's Going On Here?

We add @user.unconfirmed_or_reconfirming? to the conditional to ensure only unconfirmed users or users who are reconfirming can access this page. This is necessary since we're now allowing users to confirm new email addresses.

Step 14: Add Remember Token Column to Users Table

Create migration.

rails g migration add_remember_token_to_users remember_token:string

Update migration.

# db/migrate/[timestamp]_add_remember_token_to_users.rb
class AddRememberTokenToUsers < ActiveRecord::Migration[6.1]
  def change
    add_column :users, :remember_token, :string, null: false
    add_index :users, :remember_token, unique: true
  end
end

What's Going On Here?

We add null: false to ensure this column always has a value.

We add a unique index to ensure this column has unique data.

Run migrations.

rails db:migrate

Update the User model.

# app/models/user.rb
class User < ApplicationRecord
  ...
  has_secure_token :remember_token
  ...
end

What's Going On Here?

We call has_secure_token on the remember_token. This ensures that the value for this column will be set when the record is created. This value will be used later to securely identify the user.

Step 15: Update Authentication Concern

Add new helper methods.

# app/controllers/concerns/authentication.rb
module Authentication
  extend ActiveSupport::Concern
  ...
  def forget(user)
    cookies.delete :remember_token
    user.regenerate_remember_token
  end
  ...
  def remember(user)
    user.regenerate_remember_token
    cookies.permanent.encrypted[:remember_token] = user.remember_token
  end
  ...
  private

  def current_user
    Current.user ||= if session[:current_user_id].present?
      User.find_by(id: session[:current_user_id])
    elsif cookies[:remember_token]
      User.find_by(remember_token: cookies.encrypted[:remember_token])
    end
  end
  ...
end

What's Going On Here?

The remember method first regenerates a new remember_token to ensure these values are being rotated and can't be used more than once. We get the regenerate_remember_token method from has_secure_token. Next, we assign this value to a cookie. The call to permanent ensures the cookie won't expire until 20 years from now. The call to encrypted ensures the value will be encrypted. This is vital since this value is used to identify the user and is being set in the browser.

The forget method deletes the cookie and regenerates a new remember_token to ensure these values are being rotated and can't be used more than once.

We update the current_user method by adding a conditional to first try and find the user by the session, and then fallback to finding the user by the cookie. This is the logic that allows a user to completely exit their browser and remain logged in when they return to the website since the cookie will still be set.

Step 16: Update Sessions Controller

Update the create and destroy methods.

# app/controllers/sessions_controller.rb
class SessionsController < ApplicationController
  ...
  before_action :authenticate_user!, only: [:destroy]

  def create
    ...
    if @user
      if @user.unconfirmed?
        ...
      elsif @user.authenticate(params[:user][:password])
        login @user
        remember(@user) if params[:user][:remember_me] == "1"
        ...
      else
        ...
      end
    else
      ...
    end
  end

  def destroy
    forget(current_user)
    ...
  end
  ...
end

What's Going On Here?

We conditionally call remember(@user) in the create method if the user has checked the "Remember me" checkbox. We still need to add this to our form.

We call forget(current_user) in the destroy method to ensure we delete the remember_me cookie and regenerate the user's remember_token token.

We also add a before_action to ensure only authenticated users can access the destroy action.

Add the "Remember me" checkbox to the login form.

<!-- app/views/sessions/new.html.erb -->
<%= form_with url: login_path, scope: :user do |form| %>
  ...
  <div>
    <%= form.label :remember_me %>
    <%= form.check_box :remember_me %>
  </div>
  <%= form.submit "Sign In" %>
<% end %>

Step 17: Add Friendly Redirects

Update Authentication Concern.

# app/controllers/concerns/authentication.rb
module Authentication
  ...
  def authenticate_user!
    store_location
    ...
  end
  ...
  private
  ...
  def store_location
    session[:user_return_to] = request.original_url if request.get? && request.local?
  end

end

What's Going On Here?

The store_location method stores the request.original_url in the session so it can be retrieved later. We only do this if the request made was a get request. We also call request.local? to ensure it was a local request. This prevents redirecting to an external application.

We call store_location in the authenticate_user! method so that we can save the path to the page the user was trying to visit before they were redirected to the login page. We need to do this before visiting the login page otherwise the call to request.original_url will always return the url to the login page.

Update Sessions Controller.

# app/controllers/sessions_controller.rb
class SessionsController < ApplicationController
  ...
  def create
    ...
    if @user
      if @user.unconfirmed?
        ...
      elsif @user.authenticate(params[:user][:password])
        after_login_path = session[:user_return_to] || root_path
        login @user
        remember(@user) if params[:user][:remember_me] == "1"
        redirect_to after_login_path, notice: "Signed in."
      else
        ...
      end
    else
      ...
    end
  end
  ...
end

What's Going On Here?

The after_login_path variable it set to be whatever is in the session[:user_return_to]. If there's nothing in session[:user_return_to] then it defaults to the root_path.

Note that we call this method before calling login. This is because login calls reset_session which would deleted the session[:user_return_to].

Step 17: Account for Timing Attacks

Update the User model.

Note that this class method will be available in Rails 7.1

# app/models/user.rb
class User < ApplicationRecord
  ...
  def self.authenticate_by(attributes)
    passwords, identifiers = attributes.to_h.partition do |name, value|
      !has_attribute?(name) && has_attribute?("#{name}_digest")
    end.map(&:to_h)

    raise ArgumentError, "One or more password arguments are required" if passwords.empty?
    raise ArgumentError, "One or more finder arguments are required" if identifiers.empty?
    if (record = find_by(identifiers))
      record if passwords.count { |name, value| record.public_send(:"authenticate_#{name}", value) } == passwords.size
    else
      new(passwords)
      nil
    end
  end  
  ...
end

What's Going On Here?

This class method serves to find a user using the non-password attributes (such as email), and then authenticates that record using the password attributes. Regardless of whether a user is found or authentication succeeds, authenticate_by will take the same amount of time. This prevents timing-based enumeration attacks, wherein an attacker can determine if a password record exists even without knowing the password.

Update the Sessions Controller.

# app/controllers/sessions_controller.rb
class SessionsController < ApplicationController
  ...
  def create
    @user = User.authenticate_by(email: params[:user][:email].downcase, password: params[:user][:password])
    if @user
      if @user.unconfirmed?
        redirect_to new_confirmation_path, alert: "Incorrect email or password."
      else
        after_login_path = session[:user_return_to] || root_path
        login @user
        remember(@user) if params[:user][:remember_me] == "1"
        redirect_to after_login_path, notice: "Signed in."
      end
    else
      flash.now[:alert] = "Incorrect email or password."
      render :new, status: :unprocessable_entity
    end
  end
  ...
end

What's Going On Here?

We refactor the create method to always start by finding and authenticating the user. Not only does this prevent timing attacks, but it also prevents accidentally leaking email addresses. This is because we were originally checking if a user was confirmed before authenticating them. That means a bad actor could try and sign in with an email address to see if it exists on the system without needing to know the password.

Step 18: Store Session in the Database

We're currently setting the user's ID in the session. Even though that value is encrypted, the encrypted value doesn't change since it's based on the user id which doesn't change. This means that if a bad actor were to get a copy of the session they would have access to a victim's account in perpetuity. One solution is to rotate encrypted and signed cookie configurations. Another option is to configure the Rails session store to use mem_cache_store to store session data.

The solution we will implement is to set a rotating value to identify the user and store that value in the database.

Generate ActiveSession model.

rails g model active_session user:references

Update the migration.

class CreateActiveSessions < ActiveRecord::Migration[6.1]
  def change
    create_table :active_sessions do |t|
      t.references :user, null: false, foreign_key: {on_delete: :cascade}

      t.timestamps
    end
  end
end

What's Going On Here?

We update the foreign_key option from true to {on_delete: :cascade}. The on_delete option will delete any active_session record if its associated user is deleted from the database.

Run migration.

rails db:migrate

Update User model.

# app/models/user.rb
class User < ApplicationRecord
  ...
  has_many :active_sessions, dependent: :destroy
  ...
end

Update Authentication Concern

# app/controllers/concerns/authentication.rb
module Authentication
  ...
  def login(user)
    reset_session
    active_session = user.active_sessions.create!
    session[:current_active_session_id] = active_session.id
  end
  ...
  def logout
    active_session = ActiveSession.find_by(id: session[:current_active_session_id])
    reset_session
    active_session.destroy! if active_session.present?
  end
  ...
  private

  def current_user
    Current.user = if session[:current_active_session_id].present?
      ActiveSession.find_by(id: session[:current_active_session_id]).user
    elsif cookies[:remember_token]
      User.find_by(remember_token: cookies.encrypted[:remember_token])
    end
  end
  ...
end

What's Going On Here?

We update the login method by creating a new active_session record and then storing it's ID in the session. Note that we replaced session[:current_user_id] with session[:current_active_session_id].

We update the logout method by first finding the active_session record from the session. After we call reset_session we then delete the active_session record if it exists. We need to check if it exists because in a future section we will allow a user to log out all current active sessions.

We update the current_user method by finding the active_session record from the session, and then returning its associated user. Note that we've replaced all instances of session[:current_user_id] with session[:current_active_session_id].

Force SSL.

# config/environments/production.rb
Rails.application.configure do
  ...
  config.force_ssl = true
end

What's Going On Here?

We force SSL in production to prevent session hijacking. Even though the session is encrypted we want to prevent the cookie from being exposed through an insecure network. If it were exposed, a bad actor could sign in as the victim.

Step 19: Capture Request Details for Each New Session

Add new columns to the active_sessions table.

rails g migration add_request_columns_to_active_sessions user_agent:string ip_address:string
rails db:migrate

Update login method to capture request details.

# app/controllers/concerns/authentication.rb
module Authentication
  ...
  def login(user)
    reset_session
    active_session = user.active_sessions.create!(user_agent: request.user_agent, ip_address: request.ip)
    session[:current_active_session_id] = active_session.id
  end
  ...
end

What's Going On Here?

We add columns to the active_sessions table to store data about when and where these sessions are being created. We are able to do this by tapping into the request object and returning the ip and user agent. The user agent is simply the browser and device.

Update Users Controller.

# app/controllers/users_controller.rb
class UsersController < ApplicationController
  ...
  def edit
    @user = current_user
    @active_sessions = @user.active_sessions.order(created_at: :desc)
  end
  ...
  def update
    @user = current_user
    @active_sessions = @user.active_sessions.order(created_at: :desc)
    ...
  end
end

Create active session partial.

<!-- app/views/active_sessions/_active_session.html.erb -->
<tr>
  <td><%= active_session.user_agent %></td>
  <td><%= active_session.ip_address %></td>
  <td><%= active_session.created_at %></td>
</tr>

Update account page.

<!-- app/views/users/edit.html.erb -->
...
<h2>Current Logins</h2>
<% if @active_sessions.any? %>
  <table>
    <thead>
      <tr>
        <th>User Agent</th>
        <th>IP Address</th>
        <th>Signed In At</th>
      </tr>
    </thead>
    <tbody>
      <%= render @active_sessions %>
    </tbody>
  </table>
<% end %>

What's Going On Here?

We're simply showing any active_session associated with the current_user. By rendering the user_agent, ip_address, and created_at values we're giving the current_user all the information they need to know if there's any suspicious activity happening with their account. For example, if there's an active_session with a unfamiliar IP address or browser, this could indicate that the user's account has been compromised.

Note that we also instantiate @active_sessions in the update method. This is because the update method renders the edit method during failure cases.

Step 20: Allow User to Sign Out Specific Active Sessions

Generate the Active Sessions Controller and update routes.

rails g controller active_sessions

# app/controllers/active_sessions_controller.rb
class ActiveSessionsController < ApplicationController
  before_action :authenticate_user!

  def destroy
    @active_session = current_user.active_sessions.find(params[:id])

    @active_session.destroy

    if current_user
      redirect_to account_path, notice: "Session deleted."
    else
      reset_session
      redirect_to root_path, notice: "Signed out."
    end
  end

  def destroy_all
    current_user.active_sessions.destroy_all
    reset_session

    redirect_to root_path, notice: "Signed out."
  end
end

# config/routes.rb
Rails.application.routes.draw do
  ...
  resources :active_sessions, only: [:destroy] do
    collection do
      delete "destroy_all"
    end
  end
end

What's Going On Here?

We ensure only users who are logged in can access these endpoints by calling before_action :authenticate_user!.

The destroy method simply looks for an active_session associated with the current_user. This ensures that a user can only delete sessions associated with their account.

Once we destroy the active_session we then redirect back to the account page or to the homepage. This is because a user may not be deleting a session for the device or browser they're currently logged into. Note that we only call reset_session if the user has deleted a session for the device or browser they're currently logged into, as this is the same as logging out.

The destroy_all method is a collection route that will destroy all active_session records associated with the current_user. Note that we call reset_session because we will be logging out the current_user during this request.

Update views by adding buttons to destroy sessions.

<!-- app/views/users/edit.html.erb -->
...
<h2>Current Logins</h2>
<% if @active_sessions.any? %> 
  <%= button_to "Log out of all other sessions", destroy_all_active_sessions_path, method: :delete %>
  <table>
    <thead>
      <tr>
        <th>User Agent</th>
        <th>IP Address</th>
        <th>Signed In At</th>
        <th>Sign Out</th>
      </tr>
    </thead>
    <tbody>
      <%= render @active_sessions %>
    </tbody>
  </table>
<% end %>

<!-- app/views/active_sessions/_active_session.html.erb -->
<tr>
  <td><%= active_session.user_agent %></td>
  <td><%= active_session.ip_address %></td>
  <td><%= active_session.created_at %></td>
  <td><%= button_to "Sign Out", active_session_path(active_session), method: :delete %></td>
</tr>

Update Authentication Concern.

# app/controllers/concerns/authentication.rb
module Authentication
  ...
  private

  def current_user
    Current.user = if session[:current_active_session_id].present?
      ActiveSession.find_by(id: session[:current_active_session_id])&.user
    elsif cookies[:remember_token]
      User.find_by(remember_token: cookies.encrypted[:remember_token])
    end
  end
  ...
end

What's Going On Here?

This is a very subtle change, but we've added a safe navigation operator via the &.user call. This is because ActiveSession.find_by(id: session[:current_active_session_id]) can now return nil since we're able to delete other active_session records.

Step 21: Refactor Remember Logic

Since we're now associating our sessions with an active_session and not a user, we'll want to remove the remember_token token from the users table and onto the active_sessions.

Move remember_token column from users to active_sessions table.

rails g migration move_remember_token_from_users_to_active_sessions

# db/migrate/[timestamp]_move_remember_token_from_users_to_active_sessions.rb
class MoveRememberTokenFromUsersToActiveSessions < ActiveRecord::Migration[6.1]
  def change
    remove_column :users, :remember_token
    add_column :active_sessions, :remember_token, :string, null: false

    add_index :active_sessions, :remember_token, unique: true
  end
end

Run migration.

rails db:migrate