/opnsense-vm-images

OPNsense virtual machine images for amd64 and aarch64

Primary LanguageShellBSD 2-Clause "Simplified" LicenseBSD-2-Clause

Building OPNsense 24.7 virtual machine disk images

This fork of opnsense/tools adds a brief tutorial and two devices, AMD64VM and ARM64VM. These devices allow building OPNsense VM images (amd64 and aarch64) with the console preset to EFI or serial instead of the default VGA console (System: Settings: Administration: Console).

This tutorial explains how to set up a virtualized build system from scratch and build a disk image. Details about all build steps and options can be found in the official opnsense/tools README.

Unofficial sample VM images are published in the GitHub releases section of this repository.

Setting up a build system

Download a FreeBSD-14.1-RELEASE VM image matching the CPU architecture (amd64 or aarch64) and hypervisor. Extract the disk image and expand its size to at least 40 GB (Hyper-V: Resize-VHD, QEMU: qemu-img resize). Attach the image to a VM, boot it and log in as root using the console (SSH is disabled by default).

Set a root password, enable SSH, update FreeBSD and reboot:

# passwd
# echo 'sshd_enable="YES"' >> /etc/rc.conf
# echo 'PermitRootLogin yes' >> /etc/ssh/sshd_config
# freebsd-update fetch install
# shutdown -r now

The remaining steps can be performed via SSH or the local console.

Install Git and clone this repository:

# pkg install -y git
# git clone https://github.com/maurice-w/opnsense-vm-images /usr/tools

Update all OPNsense code repositories:

# cd /usr/tools
# make update SETTINGS=24.7

Build and reinstall pkg(8). This is required because the pkg version provided by FreeBSD is newer than the one used by OPNsense:

# cd /usr/ports/ports-mgmt/pkg
# make package
# make reinstall
# cd /usr/tools

Building a VM image

The first argument of the vm command specifies the disk image format. All formats supported by mkimg(1) are available.

All VM images have a GUID partition table (GPT) and an EFI system partition (ESP) and support UEFI boot. Images for amd64 additionally support legacy BIOS boot.

Root and swap partition sizes can be customized with the second and third argument of the vm command. The minimum root partition size is 3 GB. The swap partition can be omitted by setting the third argument to never.

The fourth argument of the vm command specifies the default console (EFI or serial). For a VGA console, this argument must be omitted.

By default, the root partition uses the UFS file system. For a ZFS file system, the ZFS=zpool build option must be added.

Building from source

All tagged OPNsense versions can be build by setting the VERSION option accordingly.

VHDX image (Hyper-V), 3 GB root partition, no swap partition, EFI console, OPNsense 24.7.1-amd64, UFS file system:

# make update vm-vhdx,3G,never,efi SETTINGS=24.7 VERSION=24.7.1 DEVICE=AMD64VM

QCOW2 image (QEMU), 30 GB root partition, 2 GB swap partition, serial console, OPNsense 24.7-amd64, ZFS file system:

# make update vm-qcow2,30G,2G,serial SETTINGS=24.7 VERSION=24.7 DEVICE=AMD64VM ZFS=zpool

QCOW2 image (QEMU), 16 GB root partition, no swap partition, EFI console, OPNsense 24.7.5-aarch64, UFS file system:

# make update vm-qcow2,16G,never,efi SETTINGS=24.7 VERSION=24.7.5 DEVICE=ARM64VM

QCOW2 image (QEMU), 20 GB root partition, 1 GB swap partition, serial console, OPNsense 24.7.2-aarch64, UFS file system:

# make update vm-qcow2,20G,1G,serial SETTINGS=24.7 VERSION=24.7.2 DEVICE=ARM64VM

Using prefetched sets

This method is much faster, but requires pre-compiled base, kernel and packages sets. The VERSION option specifies which version of the sets to download.

VHDX image (Hyper-V), 8 GB root partition, no swap partition, EFI console, OPNsense 24.7.1-amd64, ZFS file system:

# make update prefetch-base,kernel,packages vm-vhdx,8G,never,efi SETTINGS=24.7 VERSION=24.7.1 DEVICE=AMD64VM ZFS=zpool

QCOW2 image (QEMU), 40 GB root partition, 4 GB swap partition, VGA console, OPNsense 24.7-amd64, UFS file system:

# make update prefetch-base,kernel,packages vm-qcow2,40G,4G SETTINGS=24.7 VERSION=24.7 DEVICE=AMD64VM

Official packages sets are only published for some releases. If no packages set is available for the desired OPNsense version, one can be created by downloading the individual packages and adding them to a tar archive.

QCOW2 image (QEMU), 20 GB root partition, no swap partition, serial console, OPNsense 24.7.6-amd64, UFS file system:

# make update prefetch-base,kernel SETTINGS=24.7 VERSION=24.7.6
# pkg install -y rsync
# rsync -vaz rsync://mirror.level66.network/opnsense-dist/FreeBSD:14:amd64/24.7/MINT/24.7.6 /tmp
# tar -C /tmp/24.7.6/latest -cf /usr/local/opnsense/build/24.7/amd64/sets/packages-24.7.6-amd64.tar .
# make vm-qcow2,20G,never,serial SETTINGS=24.7 DEVICE=AMD64VM

The official mirrors only offer amd64 sets. A custom mirror needs to be specified for prefetching aarch64 sets.

QCOW2 image (QEMU), 10 GB root partition, no swap partition, EFI console, OPNsense 24.7.4-aarch64, UFS file system:

# make update prefetch-base,kernel,packages vm-qcow2,10G,never,efi SETTINGS=24.7 VERSION=24.7.4 DEVICE=ARM64VM MIRRORS=https://opnsense-update.walker.earth

QCOW2 image (QEMU), 5 GB root partition, no swap partition, serial console, OPNsense 24.7.2-aarch64, UFS file system:

# make update prefetch-base,kernel,packages vm-qcow2,5G,never,serial SETTINGS=24.7 VERSION=24.7.2 DEVICE=ARM64VM MIRRORS=https://opnsense-update.walker.earth

Since some OPNsense releases do not update the base and kernel, not every packages set is accompanied by base and kernel sets with the same version. If this is the case for the desired OPNsense version, base and kernel sets must be prefetched separatly.

QCOW2 image (QEMU), 40 GB root partition, no swap partition, EFI console, OPNsense 24.7.7-aarch64 (uses the same base and kernel as 24.7.6), UFS file system:

# make prefetch-base,kernel SETTINGS=24.7 VERSION=24.7.6 MIRRORS=https://opnsense-update.walker.earth
# make update prefetch-packages vm-qcow2,40G,never,efi SETTINGS=24.7 VERSION=24.7.7 DEVICE=ARM64VM MIRRORS=https://opnsense-update.walker.earth

Downloading the VM image

If successful, the VM image can be found under:

# make print-IMAGESDIR

Download the image file:

# scp root@[2001:db8::a]:/usr/local/opnsense/build/24.7/[amd64|aarch64]/images/OPNsense-24.7[.x]-vm-[amd64|aarch64].[qcow2|vhdx|...] .

Caveats

  • There are no official FreeBSD VHDX images. If setting up a build system in a Hyper-V Generation 2 VM, the VHD image must be converted to VHDX first (Convert-VHD).

  • FreeBSD doesn't support Secure Boot, this needs to be disabled in the VM settings.

  • The EFI / VGA console of the FreeBSD VM images defaults to a US keyboard layout. If required, this can be changed:

    # echo 'keymap="de.kbd"' >> /etc/rc.conf

  • Out of the box, FreeBSD only supports SLAAC, not DHCPv6. dhcpcd(8) can be used if SLAAC isn't available:

    # pkg install -y dhcpcd
# echo 'dhclient_program="/usr/local/sbin/dhcpcd"' >> /etc/rc.conf

    In IPv6-only networks without SLAAC, a temporary address needs to be added first to allow installing dhcpcd(8):

    # ifconfig [hn0|vtnet0] inet6 2001:db8::a

  • Building OPNsense VHDX images is supported (vm-vhdx), but the VHDX file is as large as the specified partition sizes combined. Setting the root partition size to 3 GB and expanding the finished VHDX image to the desired size (Resize-VHD) is recommended.