FT800/FT81X TFT Library for Arduino_STM32
I ported from here.
https://github.com/lightcalamar/GD23STM32_F103x
You can play video.
Core library
https://github.com/rogerclarkmelbourne/Arduino_STM32
Arduino FAT16/FAT32 Library
https://github.com/greiman/SdFat
| TFT | STM32F103 | SD-CARD | ||
|---|---|---|---|---|
| GND | -- | GND | ||
| MISO | -- | PA6 | ||
| CS | -- | PA4(*) | ||
| PD | -- | PB1(*) | ||
| 5V | -- | 5V | ||
| SCK | -- | PA5 | ||
| MISO | -- | PA7 | ||
| INT | -- | N/C | ||
| AUDIO | -- | (**) | ||
| PB12(*) | -- | CS | ||
| PB13 | -- | SCK | ||
| PB15 | -- | MOSI | ||
| PB14 | -- | MISO | ||
| 5V | -- | VCC | ||
| GND | -- | GND |
*You can change any pin.
Pin define is "STM32_GD2.h"
**If you want to hear Audio, You need External Audio Circuit.
The complete Audio Circuit is here.
https://www.soselectronic.cz/a_info/resource/c/FTDI/AN_252_FT800_Audio_Primer.pdf
All wiring has to be the length below the 5CM.
When wiring is the length beyond 5CM, it doesn't work mostly.
5" Graphical LCD Touchscreen, 480x272, SPI, FT800
https://www.hotmcu.com/5-graphical-lcd-touchscreen-480x272-spi-ft800-p-124.html?cPath=6_16&zenid=kfemikenqkhmjdmc0evd16j1m4
5" Graphical LCD Touchscreen, 800x480, SPI, FT810
https://www.hotmcu.com/5-graphical-lcd-touchscreen-800x480-spi-ft810-p-286.html?cPath=6_16&zenid=kfemikenqkhmjdmc0evd16j1m4
Download Gameduino2sd.zip from here & unzip it & copy all file to your SD-CARD.
http://excamera.com/sphinx/gameduino2/code.html
Wireing TFT & SD-CARD reader to STM32F103.
Try example.
FT800 have 482x272 resolution.
FT800 doesn't have the function which plays the video.
FT800 doesn't have the function which revolves around a screen.
You need a stylus pen for touch panel operation.
FT810 have 800x480 resolution.
You need a stylus pen for touch panel operation.
You can use there option in begin().
GD_CALIBRATE
Execute Calibration of a touch sensor.
A screen for calibration is indicated.
If there is calibration data already, nothing is done.
Calibration data is preserved by EEPROM.
GD_TRIM
Execute sound tests.
GD_STORAGE
A SD card is initialized.
When you use a SD card, it's always necessary.
FORCE_CALIBRATE
Execute Calibration of a touch sensor unconditionally.
A screen for calibration is indicated.
Calibration data is preserved by EEPROM.
GD_NONE
Nothing is done.