maxritter/diy-thermocam

Issues

• Good alternative for the screen in Europe

  #114 opened 6 months ago by Hamakakki
  2

• Self Diagnostic failed for Lepton device

  #113 opened 6 months ago by rexboh
  0

• Support for a visual spectrum camera

  #112 opened 7 months ago by benward1e
  0

• Why is reflectivity not set?

  #111 opened 8 months ago by zhaocundang
  1

• Incompatible with large storage micrSD cards (SDXC)

  #110 opened a year ago by hwangr87
  0

• Analysis of thermal images in FLIR TOOLS

  #109 opened a year ago by Morph-123
  0

• VS Code is cool. What about others?

  #108 opened a year ago by ajfarkas
  0

• Help ! "firmware updater.exe" for DIY-thermocam V2 (Teensy 3.6)

  #107 opened a year ago by halifax74
  2

• Raspberry Pi

  #106 opened a year ago by devnim
  0

• About the FPS

  #105 opened a year ago by devnim
  0

• TP4057 Charging module no longer available

  #103 opened 2 years ago by rossoe
  8

• Replacement for TP4057 charging module

  #66 opened 4 years ago by KrisJot
  8

• Lepton 3.1R Compatibility

  #104 opened a year ago by griffin175
  3

• Lepton sensor diagnostic failed

  #98 opened 3 years ago by GautierR
  5

• Building Instructions v3 Feedback: LED, Lipo Protector, Switch, Heatshrink, Slide Cover

  #101 opened 2 years ago by rduplain
  2

• Does the code described here work with DIY Thermocam V2 as well. I suspect the firmware is different. I hope all the other software is the same. Is there a link to the latest version of software for V2?

  #102 opened 2 years ago by JakeZw
  1

• DIYLepton_Connect()->Index was outside the bounds of the array

  #100 opened 2 years ago by gallionjason
  1

• Thermocam won't wake up

  #99 opened 2 years ago by aiermandi
  0

• finished my Themocam, a few remarks for the Enclosure

  #93 opened 2 years ago by helmarw
  5

• Image transmission via wifi

  #92 opened 2 years ago by Janusz-Janiec
  2

• MTP device Windows 10

  #91 opened 2 years ago by helmarw
  5

• DiyThermocam V2 Touch lcd

  #90 opened 2 years ago by Primergi
  2

• Cam hangs on Boot Screen, Hardware Issue?

  #89 opened 2 years ago by Catarallus
  13

• thermo and image not match correctly

  #88 opened 2 years ago by LenzoM
  1

• Camera not working

  #87 opened 2 years ago by gregg26
  2

• Arducam 2mp mini plus ov2640

  #86 opened 2 years ago by ncbelov
  4

• video feed

  #85 opened 2 years ago by jackattack21
  1

• Lepton 3.5

  #83 opened 2 years ago by WolfZ
  12

• Can't find charging module

  #97 opened 3 years ago by Catarallus
  3

• Step up converter overheating and powering down on battery

  #96 opened 3 years ago by psarossy
  2

• Having issues getting the firmware on Teensy

  #94 opened 3 years ago by salsa33
  4

• Replacement for U3V12F5 5V Step-Up

  #72 opened 4 years ago by FuwoWolf
  0

• Video Output Module without Battery

  #73 opened 4 years ago by Loremwriter
  0

• Video Output Module - Image leads to 404

  #74 opened 4 years ago by Loremwriter
  6

• Adding some text over the thermal imaging

  #67 opened 4 years ago by stephen94000
  1

• Add firmware sources older than(<4.6)

  #68 opened 4 years ago by rorio59
  0

• Build enviroment fails (Sloeber Eclipse 4.2 fails)

  #70 opened 4 years ago by Meins321
  0

• How to order the board?

  #64 opened 4 years ago by Thanh-Binh
  18

• Cam does not boot in battery mode

  #65 opened 4 years ago by DavidWid
  1

• Last Time Buy Date 09/30/2019 LEPTON BREAKOUT BOARD EOL or Obsolete Part!!

  #75 opened 4 years ago by Meins321
  14

• Thermal images problem

  #76 opened 4 years ago by liaotianjiao
  2

• Reupload pls thermal live viewer Compiled version

  #77 opened 4 years ago by Vital1984
  1

• Firmware Updater error

  #80 opened 4 years ago by Juzmars
  11

• Lepton Version in "Flir One Pro"

  #81 opened 4 years ago by chick0n
  1

• Thermocam Freezes

  #82 opened 4 years ago by chick0n
  7

• KITs Available?

  #79 opened 4 years ago by chick0n
  5

• I can't make the Lepton Breakout Board 2.0 to work

  #84 opened 4 years ago by Lionear1508
  3

• lepton 2.5 without shutter

  #78 opened 5 years ago by mikromel
  2

• Camera does not boot after switching Lepton 2.5 for Lepton 3.5

  #71 opened 5 years ago by adanger
  1

• Issue with initial Thermocam USB connection

  #69 opened 6 years ago by FOC1902
  4