Issues
- 12
[Question] how to read data without write ?
#32 opened by mczerski - 1
GSD file reading error.
#31 opened by Jan-Egil-G - 1
- 1
Is there any communication function between the master station and the master station in this project?
#30 opened by ZhangzuC - 1
After slave was reset/reloaded timeout occurs and slave-object changes its state to STATE_INIT, but its fcb remained in previous state ( fcv=1 fcb=0/1 )
#28 opened by Berendej - 4
Сonnection SIEMENS et200s
#26 opened by DHavron - 4
connecting Pyprofibus with DP/PA coupler to communcate with PA devices (Invalid telegram format)
#25 opened by Kaz040 - 7
Help with WAGO 750-343
#24 opened by TadyTheFish - 4
TxDen pin Question
#23 opened by TadyTheFish - 3
pyprofibus hardware documentation
#22 opened by omidfathi - 4
Siemens DP/AS-i LINK 20 support
#17 opened by arabel1a - 12
How to start with real hardware and GSD file?
#10 opened by looninho - 40
Festo CPV Valve terminal
#19 opened by Sigma1912 - 2
PC - FPGA interface
#20 opened by Sigma1912 - 6
"input byte, "output byte" confusion
#21 opened by Sigma1912 - 3
CP5711: Is this CP supported?
#13 opened by kishor83 - 9
- 3
- 1
- 1
Acyclic communcation support
#15 opened by KaneTW - 13
- 3
- 3
Getting telegram error
#8 opened by PEV93 - 13
Modular_Station=0: Wait for Data_Exchange-ready won't proceed to Data Exchange stage
#7 opened by marcosgatcomputer - 2
Broken link for hardware description
#6 opened by TadyTheFish - 2
Working over Ethernet
#3 opened by yoelk - 2
No module named 'pyprofibus.gsd'
#1 opened by sstickel