mc0110/inetbox2mqtt

Issues

• Connection to Raspberry Pi as Hotspot not possible

  #82 opened 18 days ago by schnico87
  5

• Lin frame problem on Rpico

  #69 opened 7 months ago by florent314
  2

• Request for Interface Compatibility with Alde 3020

  #77 opened 3 months ago by AWcgn
  1

• Is this also applicable to a Pi Zero 2W

  #81 opened a month ago by maroliict
  0

• TI-CI-LIN Controller v2.1 mit Alde 3030

  #80 opened a month ago by Matze6702
  1

• inetbox2 won't communicate with mqtt

  #79 opened a month ago by Mattteburk
  1

• Warning in Home Assistant

  #75 opened 4 months ago by 7xy
  4

• WLAN for OS mode visible, however not accessable

  #78 opened 2 months ago by Trias544
  2

• Alde 3030 with two separate heating circuits

  #57 opened 4 months ago by justselling
  8

• Information on steps for going back to original INetBox

  #73 opened 4 months ago by dannycjones
  1

• Improve install instructions for OTA-Installation with mip

  #76 opened 4 months ago by iBobik
  3

• Request for Interface Compatibility Between Truma Saphir Compact RC and Truma X Panel Touchscreen

  #74 opened 5 months ago by temuccio
  0

• Truma Vario Heat

  #47 opened a year ago by vincentfuhler
  3

• MQTT Client doesn’t reconnect

  #72 opened 7 months ago by Besc0029
  3

• Truma Aventa Compact plus

  #67 opened 7 months ago by aloisbrau
  2

• MemoryError: memory allocation failed, allocating 776 bytes

  #55 opened 7 months ago by lembnau
  7

• What is missing for older Truma heating?

  #66 opened 7 months ago by iBobik
  1

• Feature Request: Add outdoor temperature option

  #71 opened 7 months ago by Stiles96
  0

• WiFi Password in fixed IP field

  #70 opened 8 months ago by Carstens-Paulette
  3

• switching to OS mode without reason

  #68 opened 8 months ago by Carstens-Paulette
  7

• Two input boolean have the same name in your truma.yaml file

  #64 opened 9 months ago by Karatzie
  3

• Automations on your truma.yaml slow down the Home Assistant host

  #65 opened 9 months ago by Karatzie
  2

• Switching modes

  #63 opened 9 months ago by felixreher
  1

• Hot Water boost after ESP32 reboot

  #62 opened 9 months ago by Deleny74
  4

• Running on esp8266

  #59 opened 10 months ago by marcsauter75
  2

• after switching the OS mode - how can I switch back to the web interface?

  #61 opened 10 months ago by robgreiner
  2

• Problems connecting to the mqtt broker

  #60 opened a year ago by Deleny74
  4

• request: run on Raspberry Pi 3B or similar

  #58 opened a year ago by pkoevesdi
  2

• Is HA the only way to use this?

  #56 opened a year ago by NicZ1
  3

• No AP after flashing ESP32

  #48 opened a year ago by Morris124
  1

• ESP32 no (re-)connect

  #52 opened a year ago by Stiles96
  5

• Using Micropython 1.2.0

  #54 opened a year ago by gedger
  6

• Ventilation Mode

  #53 opened a year ago by Stiles96
  2

• Change config later?

  #50 opened a year ago by el-Presi
  2

• How to debug LIN bus / WOMOLIN (TI-CI-LIN Interface v2.0)

  #46 opened a year ago by fabikm
  5

• MQTT with TLS ?

  #51 opened a year ago by el-Presi
  2

• No switch to OS-Mode from Terminal

  #49 opened a year ago by Stiles96
  3

• Error message with RP 2

  #45 opened a year ago by rzaenger
  9

• Another LPG tank level option?

  #42 opened a year ago by andypnz
  2

• Truma switches automatically on after HA restart

  #38 opened 2 years ago by CzarofAK
  8

• How to access ESP32 with inetbox2mqtt from remote?

  #37 opened 2 years ago by 7wells
  6

• AP mode

  #41 opened 2 years ago by 7wells
  1

• Status shows credentials in plain text

  #35 opened 2 years ago by 7wells
  0

• v2.1.0 shows "RelNo:2.0.1" - Is this correct?

  #36 opened 2 years ago by 7wells
  0

• Credentials => Scan Wifis shows blank page

  #39 opened 2 years ago by 7wells
  1

• "Update Repo"-related questions

  #40 opened 2 years ago by 7wells
  2

• Sensors "unknown" because of breaking change in HA ("device_class": "None")

  #33 opened 2 years ago by snipah
  0

• Disable captive portal?

  #34 opened 2 years ago by 7wells
  5

• How to place truma.yaml separately in Home Assistant?

  #31 opened 2 years ago by 7wells
  4

• How to get back to "OS-mode"?

  #32 opened 2 years ago by snipah
  2