mcci-catena/Modbus-for-Arduino

Issues

• Add support for RS485 Tx and Rx with two different IOs

  #42 opened 4 years ago by dhineshkumarmcci
  0

• Release v4.0.11

  #40 opened 5 years ago by terrillmoore
  0

• Cannot compile master: Catena_PollableInterface.h not found

  #35 opened 5 years ago by matthijskooijman
  5

• Don't require Catena for queued datagrams

  #38 opened 5 years ago by terrillmoore
  0

• Add `isDeviceAddress()` static constexpr

  #36 opened 5 years ago by terrillmoore
  0

• Add continuous integration

  #17 opened 6 years ago by terrillmoore
  0

• Add request queueing for host

  #33 opened 5 years ago by terrillmoore
  0

• Modbus symbols need to be namespaced

  #2 opened 5 years ago by terrillmoore
  0

• Rename EXC_* to MB_EXC_*.

  #10 opened 5 years ago by terrillmoore
  0

• Rename ERR_LIST type to something more useful

  #16 opened 5 years ago by terrillmoore
  0

• Add version macros

  #30 opened 6 years ago by terrillmoore
  0

• Change modbus constructors to use member initializer list

  #28 opened 6 years ago by terrillmoore
  0

• Inconsistent error returns for ::query

  #26 opened 6 years ago by terrillmoore
  0

• Separate code and declarations

  #23 opened 6 years ago by terrillmoore
  0

• Adopt new Arduino library layout

  #24 opened 6 years ago by terrillmoore
  0

• BAD CRC on reading more than 29 registers

  #21 opened 6 years ago by dhineshkumarmcci
  7

• Add catena-arduino-platform example with pollable-interface

  #18 opened 6 years ago by terrillmoore
  0

• Change simple-host example to poll multiple devices

  #19 opened 6 years ago by terrillmoore
  0

• Change simple-host example to run at 19.2k baud.

  #20 opened 6 years ago by terrillmoore
  0

• Time calculations are prone to error at wraparound

  #14 opened 7 years ago by terrillmoore
  0

• Change simple_host example to detect errors

  #12 opened 7 years ago by terrillmoore
  0

• Wrong place for disabling TX?

  #4 opened 7 years ago by terrillmoore
  0

• Rename NO_REPLY > ERR_NO_REPLY

  #7 opened 7 years ago by terrillmoore
  0

• Host poll() return value is inconsistent

  #6 opened 7 years ago by terrillmoore
  2

• Use virtual methods (or callbacks) to access registers for device

  #1 opened 7 years ago by terrillmoore
  1

• Last Error is not set after a runt packet is received by host

  #3 opened 7 years ago by terrillmoore
  1

• getRxBuffer should not mix up error code with buffer size.

  #5 opened 7 years ago by terrillmoore
  1