arduino-cli is an all-in-one solution that provides builder, boards/library manager, uploader, discovery and many other tools needed to use any Arduino compatible board and platforms.
This software is currently in alpha state: new features will be added and some may be changed.
It will be soon used as a building block in the Arduino IDE and Arduino Create.
This is not yet available until the first stable version is released.
Please note that these are preview build, they may have bugs, some features may not work or may be changed without notice:
- Linux 64 bit 0.2.2-alpha.preview
- Linux 32 bit 0.2.2-alpha.preview
- Linux ARM 0.2.2-alpha.preview
- Windows 0.2.2-alpha.preview
- Mac OSX 0.2.2-alpha.preview
- You should have a recent Go compiler installed.
- Run
go get -u github.com/arduino/arduino-cli - The
arduino-cliexecutable will be produced in$GOPATH/bin/arduino-cli
You may want to copy the executable into a directory which is in your PATH environment variable
(such as /usr/local/bin/).
The goal of the Arduino CLI is to be used by either including it in Makefile or in any kind of script for the Command Line. The Arduino CLI aims to replace the majority of features the Arduino IDE has without the graphical UI.
The command will create a new empty sketch named MyFirstSketch in the default directory under $HOME/Arduino/
$ arduino-cli sketch new MyFirstSketch
Sketch created in: /home/luca/Arduino/MyFirstSketch
$ cat /home/luca/Arduino/MyFirstSketch/MyFirstSketch.ino
void setup() {
}
void loop() {
}
Use your favourite file editor or IDE to modify the .ino file under: $HOME/Arduino/MyFirstSketch/MyFirstSketch.ino
and change the file to look like this one:
void setup() {
pinMode(LED_BUILTIN, OUTPUT);
}
void loop() {
digitalWrite(LED_BUILTIN, HIGH);
delay(1000);
digitalWrite(LED_BUILTIN, LOW);
delay(1000);
}
If you are running a fresh install of the arduino-cli you probably need to update the platform indexes by running:
$ arduino-cli core update-index
Updating index: package_index.json downloaded
Now, just connect the board to your PCs by using the USB cable. In this example we will use the MKR1000 board.
$ arduino-cli board list
FQBN Port ID Board Name
/dev/ttyACM0 2341:804E unknown
the board has been discovered but we do not have the correct core to program it yet. Let's install it!
We have to look at the core available with the core search command. It will provide a list of available cores matching the name arduino
$ arduino-cli core search arduino
Searching for platforms matching 'arduino'
ID Version Installed Name
Intel:arc32 2.0.2 No Intel Curie Boards
arduino:avr 1.6.21 No Arduino AVR Boards
arduino:nrf52 1.0.2 No Arduino nRF52 Boards
arduino:sam 1.6.11 No Arduino SAM Boards (32-bits ARM Cortex-M3)
arduino:samd 1.6.18 No Arduino SAMD Boards (32-bits ARM Cortex-M0+)
arduino:stm32f4 1.0.1 No Arduino STM32F4 Boards
littleBits:avr 1.0.0 No littleBits Arduino AVR Modules
If you're unsure you can try to refine the search with the board name
$ arduino-cli core search mkr1000
Searching for platforms matching 'mkr1000'
ID Version Installed Name
arduino:samd 1.6.19 No Arduino SAMD Boards (32-bits ARM Cortex-M0+)
So, the right platform for the Arduino MKR1000 is arduino:samd, now we can install it
$ arduino-cli core install arduino:samd
Downloading tools...
arduino:arm-none-eabi-gcc@4.8.3-2014q1 downloaded
arduino:bossac@1.7.0 downloaded
arduino:openocd@0.9.0-arduino6-static downloaded
arduino:CMSIS@4.5.0 downloaded
arduino:CMSIS-Atmel@1.1.0 downloaded
arduino:arduinoOTA@1.2.0 downloaded
Downloading cores...
arduino:samd@1.6.19 downloaded
Installing tools...
Installing platforms...
Results:
arduino:samd@1.6.19 - Installed
arduino:arm-none-eabi-gcc@4.8.3-2014q1 - Installed
arduino:bossac@1.7.0 - Installed
arduino:openocd@0.9.0-arduino6-static - Installed
arduino:CMSIS@4.5.0 - Installed
arduino:CMSIS-Atmel@1.1.0 - Installed
arduino:arduinoOTA@1.2.0 - Installed
Now verify we have installed the core properly by running
$ arduino-cli core list
ID Installed Latest Name
arduino:samd 1.6.19 1.6.19 Arduino SAMD Boards (32-bits ARM Cortex-M0+)
We can finally check if the board is now recognized as a MKR1000
$ arduino-cli board list
FQBN Port ID Board Name
arduino:samd:mkr1000 /dev/ttyACM0 2341:804E Arduino/Genuino MKR1000
Great! Now the Board FQBN (Fully Qualified Board Name) and the Board Name look good, we are ready to compile and upload the sketch
To compile the sketch we have to run the compile command with the proper FQBN we just got in the previous command.
$ arduino-cli compile --fqbn arduino:samd:mkr1000 Arduino/MyFirstSketch
Sketch uses 9600 bytes (3%) of program storage space. Maximum is 262144 bytes.
We can finally upload the sketch and see our board blinking, we now have to specify the serial port used by our board other than the FQBN:
$ arduino-cli upload -p /dev/ttyACM0 --fqbn arduino:samd:mkr1000 Arduino/MyFirstSketch
No new serial port detected.
Atmel SMART device 0x10010005 found
Device : ATSAMD21G18A
Chip ID : 10010005
Version : v2.0 [Arduino:XYZ] Dec 20 2016 15:36:43
Address : 8192
Pages : 3968
Page Size : 64 bytes
Total Size : 248KB
Planes : 1
Lock Regions : 16
Locked : none
Security : false
Boot Flash : true
BOD : true
BOR : true
Arduino : FAST_CHIP_ERASE
Arduino : FAST_MULTI_PAGE_WRITE
Arduino : CAN_CHECKSUM_MEMORY_BUFFER
Erase flash
done in 0.784 seconds
Write 9856 bytes to flash (154 pages)
[==============================] 100% (154/154 pages)
done in 0.069 seconds
Verify 9856 bytes of flash with checksum.
Verify successful
done in 0.009 seconds
CPU reset.
Now we can try to add a useful library to our sketch. We can at first look at the name of a library, our favourite one is the wifi101, here the command to get more info
$ arduino-cli lib search wifi101
Name: "WiFi101OTA"
Author: Arduino
Maintainer: Arduino <info@arduino.cc>
Sentence: Update sketches to your board over WiFi
Paragraph: Requires an SD card and SAMD board
Website: http://www.arduino.cc/en/Reference/WiFi101OTA
Category: Other
Architecture: samd
Types: Arduino
Versions: [1.0.2, 1.0.0, 1.0.1]
Name: "WiFi101"
Author: Arduino
Maintainer: Arduino <info@arduino.cc>
Sentence: Network driver for ATMEL WINC1500 module (used on Arduino/Genuino Wifi Shield 101 and MKR1000 boards)
Paragraph: This library implements a network driver for devices based on the ATMEL WINC1500 wifi module
Website: http://www.arduino.cc/en/Reference/WiFi101
Category: Communication
Architecture: *
Types: Arduino
Versions: [0.5.0, 0.6.0, 0.10.0, 0.11.0, 0.11.1, 0.11.2, 0.12.0, 0.15.2, 0.8.0, 0.9.0, 0.12.1, 0.14.1, 0.14.4, 0.14.5, 0.15.1, 0.7.0, 0.14.0, 0.14.2, 0.14.3, 0.9.1, 0.13.0, 0.15.0, 0.5.1]
We are now ready to install it! Please be sure to use the full name of the lib as specified in the "Name:" section previously seen
$ arduino-cli lib install "WiFi101"
Downloading libraries...
WiFi101@0.15.2 downloaded
Installed WiFi101@0.15.2
arduino-cli is a container of commands, to see the full list just run:
$ arduino-cli
Arduino Command Line Interface (arduino-cli).
Usage:
arduino-cli [command]
Examples:
arduino <command> [flags...]
Available Commands:
board Arduino board commands.
compile Compiles Arduino sketches.
config Arduino Configuration Commands.
core Arduino Core operations.
help Help about any command
lib Arduino commands about libraries.
sketch Arduino CLI Sketch Commands.
upload Upload Arduino sketches.
version Shows version number of Arduino CLI.
....Each command has his own specific help that can be obtained with the help command, for example:
$ arduino-cli help core
Arduino Core operations.
Usage:
arduino-cli core [command]
Examples:
arduino-cli core update-index # to update the package index file.
Available Commands:
download Downloads one or more cores and corresponding tool dependencies.
install Installs one or more cores and corresponding tool dependencies.
list Shows the list of installed cores.
update-index Updates the index of cores.
Flags:
-h, --help help for core
Global Flags:
--config-file string The custom config file (if not specified ./.cli-config.yml will be used). (default "/home/megabug/Workspace/go/src/github.com/arduino/arduino-cli/.cli-config.yml")
--debug Enables debug output (super verbose, used to debug the CLI).
--format string The output format, can be [text|json]. (default "text")
Use "arduino-cli core [command] --help" for more information about a command.