Issues
- 0
Docs for importing PAC crates are stale
#24 opened by mciantyre - 7
USB logging: USB device not recognized on Windows
#126 opened by renedavoh - 4
Also depending on defmt_rtt causes linker error
#130 opened by cstrahan - 4
Digital InputPin: configuring pullup/pulldown
#59 opened by Walther - 0
Remove logging from BSP
#150 opened by mciantyre - 1
I2C lines are not open drain
#153 opened by mciantyre - 0
`Trng` keeps delivering the same 16 numbers
#138 opened by Finomnis - 3
Interaction with RTIC SYSTICK handling
#134 opened by wyager - 8
SD card driver
#102 opened by mciantyre - 12
- 2
- 10
Different PWM example?
#121 opened by brandonros - 3
Write panic message to usb
#109 opened by tyalie - 4
- 6
Rust-based USB logging
#95 opened by mciantyre - 0
Document SRTC quirks in teensy4-bsp
#105 opened by mciantyre - 4
- 4
Teensy 4.1 First set of i2c line are not accessible as there pins are not flagged as I2C pins.
#123 opened by Sandvoxel - 5
USB Host Example
#122 opened by saturn77 - 1
Define and document 4.1 pins 48 through 54
#116 opened by mciantyre - 3
SPI1 don't work with pins p34, p35, p37
#115 opened by Alexander89 - 2
Provide a GPIO interrupt example
#101 opened by algesten - 2
update template
#113 opened by dhiltonp - 2
Add example code for enabling pull-up resistor on a pin and sampling the pin.
#107 opened by mutantbob - 0
Document how the runtime works
#92 opened by mciantyre - 4
- 0
Supporting cortex-m-rt-macros
#12 opened by mciantyre - 6
- 4
- 1
`StatefulOutputPin::is_set_high` appears to return incorrect value after calls to `toggle`
#67 opened by mitchmindtree - 3
Example using `teensy4_bsp` with `rtic`?
#62 opened by mitchmindtree - 1
- 1
Publish initial versions to crates.io
#21 opened by mciantyre - 3
- 5
Certain sub-PAC crates build slowly
#48 opened by mciantyre - 3
Support SPI DMA transfers
#51 opened by dflemstr - 0
Docker build missing jq
#56 opened by Walther - 2
Implement the USB device in Rust
#42 opened by mciantyre - 0
Rethink how we accomplish pin muxing
#46 opened by mciantyre - 0
Support additional UART configurations
#35 opened by mciantyre - 1
Add SPI peripheral
#25 opened by mciantyre - 2
Collaboration around i.mx rt
#49 opened by teburd - 0
Expose additional Teensy 4 PWM modules
#43 opened by mciantyre - 0
PWM get_duty() is incorrect
#44 opened by mciantyre - 1
Document the cargo generate template
#38 opened by mciantyre - 2
undefined symbol __svectors
#37 opened by ahepp - 2
Add UART peripheral
#30 opened by mciantyre - 3
Test the I2C implementation
#29 opened by mciantyre - 0
Add clippy to CI
#23 opened by mciantyre - 0
Build and run with no optimizations
#7 opened by mciantyre