Parallax.js

Simple, lightweight Parallax Engine that reacts to the orientation of a smart device. Where no gyroscope or motion detection hardware is available, the position of the cursor is used instead.

Check out this demo to see it in action!

Setup

Simply create a list of elements giving each item that you want to move within your parallax scene a class of layer and a data-depth attribute specifying its depth within the scene. A depth of 0 will cause the layer to remain stationary, and a depth of 1 will cause the layer to move by the total effect of the calculated motion. Values inbetween 0 and 1 will cause the layer to move by an amount relative to the supplied ratio.

<ul id="scene">
  <li class="layer" data-depth="0.00"><img src="layer6.png"></li>
  <li class="layer" data-depth="0.20"><img src="layer5.png"></li>
  <li class="layer" data-depth="0.40"><img src="layer4.png"></li>
  <li class="layer" data-depth="0.60"><img src="layer3.png"></li>
  <li class="layer" data-depth="0.80"><img src="layer2.png"></li>
  <li class="layer" data-depth="1.00"><img src="layer1.png"></li>
</ul>

To kickoff a Parallax scene, simply select your parent DOM Element and pass it to the Parallax constructor.

var scene = document.getElementById('scene');
var parallax = new Parallax(scene);

Behaviours

There are a number of behaviours that you can setup for any given Parallax instance. These behaviours can either be specified in the markup via data attributes or in JavaScript via the constructor and API.

Behavior	Values	Description
`calibrate-x`	`true` or `false`	Specifies whether or not to cache & calculate the motion relative to the initial `x` axis value on initialisation.
`calibrate-y`	`true` or `false`	Specifies whether or not to cache & calculate the motion relative to the initial `y` axis value on initialisation.
`invert-x`	`true` or `false`	`true` moves layers in opposition to the device motion, `false` slides them away.
`invert-y`	`true` or `false`	`true` moves layers in opposition to the device motion, `false` slides them away.
`limit-x`	`number` or `false`	A numeric value limits the total range of motion in `x`, `false` allows layers to move with complete freedom.
`limit-y`	`number` or `false`	A numeric value limits the total range of motion in `y`, `false` allows layers to move with complete freedom.
`scalar-x`	`number`	Multiplies the input motion by this value, increasing or decreasing the sensitivity of the layer motion.
`scalar-y`	`number`	Multiplies the input motion by this value, increasing or decreasing the sensitivity of the layer motion.
`friction-x`	`number` `0 - 1`	The amount of friction the layers experience. This essentially adds some easing to the layer motion.
`friction-y`	`number` `0 - 1`	The amount of friction the layers experience. This essentially adds some easing to the layer motion.

In addition to the behaviours described above, there are two methods enable() and disable() that activate and deactivate the Parallax instance respectively.

Behaviors: Data Attributes Example

<ul id="scene"
  data-calibrate-x="false"
  data-calibrate-y="true"
  data-invert-x="false"
  data-invert-y="true"
  data-limit-x="false"
  data-limit-y="10"
  data-scalar-x="2"
  data-scalar-y="8"
  data-friction-x="0.2"
  data-friction-y="0.8">
  <li class="layer" data-depth="0.00"><img src="graphics/layer6.png"></li>
  <li class="layer" data-depth="0.20"><img src="graphics/layer5.png"></li>
  <li class="layer" data-depth="0.40"><img src="graphics/layer4.png"></li>
  <li class="layer" data-depth="0.60"><img src="graphics/layer3.png"></li>
  <li class="layer" data-depth="0.80"><img src="graphics/layer2.png"></li>
  <li class="layer" data-depth="1.00"><img src="graphics/layer1.png"></li>
</ul>

Behaviors: Constructor Object Example

var scene = document.getElementById('scene');
var parallax = new Parallax(scene, {
  calibrateX: false,
  calibrateY: true,
  invertX: false,
  invertY: true,
  limitX: false,
  limitY: 10,
  scalarX: 2,
  scalarY: 8,
  frictionX: 0.2,
  frictionY: 0.8
});

Behaviors: API Example

var scene = document.getElementById('scene');
var parallax = new Parallax(scene);
parallax.enable();
parallax.disable();
parallax.calibrate(false, true);
parallax.invert(false, true);
parallax.limit(false, 10);
parallax.scalar(2, 8);
parallax.friction(0.2, 0.8);

jQuery

If you're using jQuery or Zepto and would prefer to use Parallax.js as a plugin, you're in luck!

$('.scene').parallax();

jQuery: Passing Options

$('.scene').parallax({
  calibrateX: false,
  calibrateY: true,
  invertX: false,
  invertY: true,
  limitX: false,
  limitY: 10,
  scalarX: 2,
  scalarY: 8,
  frictionX: 0.2,
  frictionY: 0.8
});

jQuery: API

var $scene = $('.scene').parallax();
$scene.parallax('enable');
$scene.parallax('disable');
$scene.parallax('calibrate', false, true);
$scene.parallax('invert', false, true);
$scene.parallax('limit', false, 10);
$scene.parallax('scalar', 2, 8);
$scene.parallax('friction', 0.2, 0.8);

Build

cd build
npm install
node build.js

Author

Matthew Wagerfield: @mwagerfield

License

Licensed under MIT. Enjoy.

meganem/parallax