mercenaruss/zigstar_addons

Issues

• update fails to run

  #44 opened 5 months ago by rugene76
  7

• Installation of 20240710 coordinator firmware fails on Sonoff ZigbeeDongle Plus

  #46 opened 4 months ago by ObadahFahmy
  3

• unzip: short read

  #48 opened 4 months ago by nric
  1

• Can it auto bsl while flash the usb device?

  #47 opened 5 months ago by yzwudong
  0

• Missing required option 'device'

  #31 opened 9 months ago by 532910
  5

• Unable to view logs with latest HAOS release

  #35 opened 8 months ago by harvindhillon
  4

• Failure to update firmware home assistant yellow

  #41 opened 6 months ago by srkeynton
  2

• Cannot flash diy esp32-POE - EFR32MG21 board

  #36 opened 8 months ago by willumpie82
  1

• Unable to update sonoff dongle-P directly connected through usb to home assistant.

  #34 opened 8 months ago by tomtom13
  1

• Docker Image

  #11 opened 10 months ago by boehser-enkel
  5

• Error: '/root/firmware.gbl' does not appear to be a valid GBL image

  #24 opened 10 months ago by henning99k
  1

• Unable to flash Slae.sh CC2652RB stick

  #17 opened 10 months ago by Stooovie
  1

• [REQUEST] Ability to "Write IEEE address" (i.e. option to change IEEE address) with zigstar-cc2652-flasher add-on

  #20 opened a year ago by Hedda
  1

• [Help] Issue flashing

  #22 opened 10 months ago by giopas
  7

• [REQUEST] Look at patches from darkxst for his multipan flasher fork of the Silabs Flasher

  #23 opened 10 months ago by Hedda
  1

• Error on saving configuration for LAN update in HASS.IO.

  #26 opened 10 months ago by robertp007
  1

• Fail to flash UZG-01 (CC2652P7) using zigstar-cc2652p7-flasher

  #29 opened 10 months ago by hilsonp
  1

• Unable to update firmware Sonoff Dongle

  #25 opened a year ago by Murray112
  3

• Add -i, --ieee-address addr option to set the secondary 64 bit IEEE address

  #8 opened a year ago by alwillha
  3

• Error: option 'device' required even for network devices?

  #15 opened a year ago by Stadicus
  7

• [REQUEST] Ability to "Write IEEE address" (i.e. option to change IEEE address) with the zigstar-silabs-flasher add-on

  #21 opened a year ago by Hedda
  0

• [REQUEST] Zigbee network backup and restore add-on to make migration easier for Zigbee2MQTT users

  #19 opened a year ago by Hedda
  1

• Zigbee2MQTT not starting after flush

  #13 opened a year ago by nicocoetzee
  2

• Sonoff zbdongle-p update failed: unable to start service cc2652-flasher: command exited 7

  #12 opened a year ago by hillmar
  4

• Error flashing Sonoff-P

  #14 opened a year ago by sjmotew
  1

• Checksum error in ZigStar TI CC2652P/P7 firmware flasher add-on?

  #10 opened a year ago by kylepyke
  5

• UZG-01 fails to upgrade: unable to start service cc2652-flasher: command exited 1

  #3 opened a year ago by ffries
  2