Issues
- 2
- 2
error handling request
#30 opened by nebbiadigiorno - 1
- 0
[REQUEST] New gateway/adapter based on Silicon Labs EFR32MG26 as Zigbee Coordinator / Zigbee Router / Thread Border Router
#42 opened by Hedda - 6
Zigbee destroyed?
#36 opened by Duffy987 - 1
ZigiHat i2c VCC issue on RPI3b
#32 opened by buuhuu - 1
ESPHome and ethernet
#35 opened by ssolodennikov - 0
- 1
[REQUEST] Pick and place file
#31 opened by denes44 - 1
- 1
Broken links in repository - letyshops
#24 opened by xDaemonSx - 0
Password reset on ZigStar LAN Gateway
#26 opened by msrv - 4
Broken links in repository
#23 opened by letovlive - 0
[REQUEST] Implement support for new native tcp:// protocol for TCP/IP connection in Home Assistant's ZHA integration?
#22 opened by Hedda - 2
[REQUEST] OpenThread Border Router (OTBR) RCP and NCP firmware images for CC2652R based ZigStar Gateways/Adapters?
#18 opened by Hedda - 2
Wrong pin naming on the silk screen
#19 opened by rea-ducks - 1
[SUGGESTION] RTC (Real-Time-Clock) and a clock-battery + a buzzer and RGB LED to the PCB board?
#17 opened by Hedda - 1
- 1
Test and list ZigStar Gateway compatibility with Jeedom Official Zigbee Plugin (which is based on zigpy)
#6 opened by Hedda - 8
[REQUEST] Zeroconf support to ZigStar LAN Gateway for Home Assistant ZHA network discovery
#2 opened by Hedda - 4
Cannot connect to mqtt running as HA addon Client <unknown> disconnected, not authorised
#20 opened by evlo - 5
3.3V A short circuit PCB problem C2 is incorrectly grounded in wiring and needs to be fixed. I also can't design the software, can't submit merge request
#15 opened by ahonxxx - 1
LilyZig: must 2.0mm UART be connected?
#16 opened by rea-ducks - 4
Unable to disable WiFi
#14 opened by acovrig - 6
Test and verify Koenkk experimental firmware for CC2652P configurable up to 20 dBm TX power output
#12 opened by Hedda - 3
Зависания WEB
#10 opened by lavrizone - 1
gerber version 1.2 ?
#13 opened by Symbol84 - 1
Power supply specs?
#11 opened by petersem - 0
Test and list ZigStar Gateway compatibility with Zigbee2Tasmota / Z2T (tasmota-zbbridge firmware for ESP32)
#7 opened by Hedda - 1
Suggest redesign next ZigStar Gateway and its Zigbee Radio Shield to be compatible with the Raspberry Pi GPIO Header
#5 opened by Hedda - 3
ESPHome Password
#1 opened by Julius112