metachris/RPIO

Issues

• Don't work on Raspberry Pi 3

  #78 opened 9 years ago by chdorb
  27

• RPIO won't run on my Raspberry Pi 4, how to remove?

  #126 opened 3 years ago by jimgg1
  1

• _PWM.cpython-37m-arm-linux-gnueabihf.so: undefined symbol: makedev

  #119 opened 5 years ago by prem111as
  4

• https://pythonhosted.org/RPIO/#installation seems outdated

  #127 opened 3 years ago by gitawayu
  0

• Cannot get RPIO.PWM to work with OSMC. Error: "Page 0 not present"

  #79 opened 3 years ago by CieNTi
  5

• Problem running RPIO on Raspberry Pi 4

  #125 opened 4 years ago by Tim8Trudeau
  2

• System error

  #124 opened 4 years ago by loguna123
  0

• mmap check

  #123 opened 4 years ago by zeno000
  0

• This module can only be run on a Raspberry Pi

  #106 opened 7 years ago by darrahts
  14

• Interrupted by signal 11: SIGSEGV

  #122 opened 4 years ago by pwdavari
  0

• RPI 4 Model

  #116 opened 5 years ago by x0341
  1

• Raspberry CM3 module unsupported.

  #112 opened 6 years ago by amontefusco
  1

• RPIO-0.10.0-py3.5-linux-armv7l.egg SystemError: This module can only be run on a Raspberry Pi!

  #121 opened 5 years ago by ab1vl
  1

• how disable debbug ?

  #120 opened 5 years ago by prem111as
  0

• SystemError: This module can only be run on a Raspberry Pi!

  #118 opened 5 years ago by ddwy
  0

• RuntimeError: This module can only be run on a Raspberry Pi!

  #117 opened 5 years ago by aceboy2020
  2

• Uncaught Error: Cannot find 'rpio'

  #115 opened 5 years ago by lorenzwinkler1
  0

• UnicodeDecodeError

  #94 opened 8 years ago by pipeult
  2

• After upgrading to buster branch v2 stops working

  #114 opened 5 years ago by antonvangorp
  1

• Debian buster need #include <sys/sysmacros.h> inside pwm.c

  #113 opened 5 years ago by VigibotDev
  0

• This module can only be run on a Raspberry Pi!

  #86 opened 8 years ago by waynejacobsen
  17

• SystemError: This module can only be run on a Raspberry Pi!

  #111 opened 6 years ago by hosnerm
  4

• Feature request: Interrupt timestamp

  #69 opened 9 years ago by robiwano
  1

• System hangs during reboot with RPIO python script running in docker

  #109 opened 7 years ago by Yakov-Chernogor
  1

• Input function doen't work

  #108 opened 7 years ago by fishwolf
  0

• BCM2835 support?

  #104 opened 7 years ago by courageon
  12

• "The [control block] address must be 256 bit aligned, so the bottom 5 bits of the address must be zero."

  #97 opened 8 years ago by steverpalmer
  1

• RPIO ver.2

  #107 opened 7 years ago by brujap
  1

• Getting errors on Raspberry Pi 3

  #102 opened 7 years ago by GaryK4
  1

• ioctl_set_msg failed:-1

  #103 opened 7 years ago by Damel91
  0

• Support for Raspberry Pi Zero W

  #96 opened 8 years ago by jjorosa
  12

• RPIO doesn't work on NanoPi M1 Plus

  #93 opened 8 years ago by 83naff
  2

• /

  #101 opened 7 years ago by cuchiaram
  0

• Doesn't work on Linux 4.9.0 with aarch64

  #98 opened 7 years ago by russell
  2

• Is this project dead?

  #77 opened 9 years ago by fchorney
  22

• v2 beta: Script rpio fails on Pi3

  #99 opened 7 years ago by Thad-BC
  2

• RPIO fails to detect Raspberry Pi 3

  #92 opened 8 years ago by Thad-BC
  2

• easy_install of RPIO fails

  #91 opened 7 years ago by Thad-BC
  1

• Pi 3 GPIO 20 "Invalid Pin Number"

  #95 opened 8 years ago by JavaWantaBe
  0

• Can't find python.h on PI3

  #85 opened 8 years ago by waynejacobsen
  3

• servod.c outdated v2 branch

  #89 opened 8 years ago by frkami123
  0

• Version 2 PWM timing on Pi 2

  #87 opened 8 years ago by jamieboyd
  1

• Fails to run or Raspberry PI 3, gives error, "Can only run on Raspberry PI"

  #80 opened 9 years ago by pnduffy
  6

• KivyPie only showing a Terminal!

  #83 opened 9 years ago by TheBookKnight
  7

• Naming-conflict with rpio and rpio-curses commands

  #81 opened 9 years ago by lurch
  1

• Servo.stop_servo sometimes moves servo when turning it off

  #75 opened 9 years ago by markfickett
  1

• set_servo is momentary not permanent

  #74 opened 9 years ago by Berryfier
  2

• Does cleanup() shut down the callback thread?

  #73 opened 9 years ago by jomido
  0

• additional installation dependancies

  #72 opened 9 years ago by papahabla
  0

• RPi.GPIO.add_event_detect does not appear to be in RPIO

  #71 opened 9 years ago by nxg
  0